TJ 800 MINI SMART TV SIMPLIFIED USER MANUAL Please read the safety instructions in the enclosed user manual before usage. SAFETY INSTRUCTIONS FOR TJ800 MINI SMART TV CONTENTS 1Please DO read the safety instructions carefully. 2Please DO keep this manual property for future reference. 3Please put this product on a stable and clean table before usage. 4All the openings and slots on the product case are for ventilation and heat dissipation to avoild component damage due to over-
CHAPTER ONE BRIEF INTRODUCTION TO TJ800 TV 1.1 TV Front View ...........................................1 1.2 TV Rear View ...........................................2 1.3 TV Remote Control ...................................3 heating, so do NOT cover or block these parts. 1.4 Power Supply ..........................................4 5Do NOT place the power supply in places where it is easy to be CHAPTER TWO COMMON ISSUES trod on,do NOT put any item on the power lines. 6Do NOT pour any kind of liquid into this product, otherwise it may suer damage or circuitry burnout. 2.1 Start-up ...............................................5 2.2 Outer Device .........................................6 7Do NOT place this product in the environment which temperature 2.3 Operating System Introduction ..................7 is above 65 or below 0, otherwise it may be damaged. 8Please do NOT put this product in the environment with high humidity or dust. 9Please contact professional personnel for further treatment if the following conditions happen:
aPower supply source damage;
bLiquid inltration into product case;
cNo reaction or black screen after power-on. 2.4 Network Connection ................................8 2.5 Wireless keyboard, mouse, game controller and other extension parts 9 CHAPTER THREE WARRANTY AND AFTER-SALES COMMITMENT 3.1 TJ800 TV Warranty Commitment..............10 3.2 TJ 800 TV After-sales Commitment.................11 3.3 TJ800 TV Warranty Certicate and Qualication.11 CHAPTER ONE BRIEF INTRODUCTION TO TJ800 TV 1.1 TV FRONT VIEW 1.2 TV REAR VIEW 1.3 TV REMOTE CONTROL 1.4 POWER SUPPLY CHAPTER TWO COMMON ISSUES 2.1 START-UP 2.2 OUTER DEVICE 2.3 OPERATING SYSTEM INTRODUCTION 2.4 NETWORK CONNECTION Standy: pull the power switch up to enter the standy mode. HDMI video device connection: when the product is in the standby mode, insert the HDMI wire of outer device into the HDMI socket in the back of the 1Turn on TV to enter the general Android system interface 2Device setting WIFI setting product, boot up the connected device and pull down the system switch. 1. Color/Monochrome adjustment 2. Volume adjustment Product name Mini Smart TV Product model TJ800 Outer dimensions 11.6X10.8X9.3 Weight 325g Screen 3.5inch IPS HD LCD Resolution ratio 640X480 Speaker 4 3W Memory 2G Product me mory 16G WIFI USB X2 HDMI input X1 IEEE 802.11 b/g/n System Android 7.1.2 TF card Supporting 128GB maximum CPU Amlogic s905w/4-core/2.0Hz Power supply DC6V/1.0A 1Power supply switch 2System switch 3USB1 4USB2 5HDMI signal input 6Speaker 7TF card slot 8DC55X21 power socket Pull up the power switch Pull down the system switch TV turn-on: pull up the switches of power switch and system switch, after the snowake animation is over and the Android system starts up, the product is ready for use. Pull up the power switch to enter the standy screen Pull up the power switch Pull down the system switch Outer HDMI device POWER SUPPLY DESCRIPTION Power supply requirement: A 9V/1.5A power supply should be applied to this product, the plug specication should be DC 5.5mm X 2.1mm. 1Corresponding power adapters are enclosed based on dierent coutries or regions end users are located in. 2Please DO note the power supply requirement if you want to buy the adapter by yourself or use a mobile power supply, this product may be malfunctional or damaged if the voltage or current output by your power supply is above or below the requirement. Pull up the power switch Pull down the system switch 5 If the screen keeps showing the standby image, please pull the system switch again or reboot the TV and outer device. Note: A few outer devices may not connect with this product normally due to the compatibility issue between outer HDMI and USB devices, please be noted that this is not the products fault or quality issue. System standby System setting Volume adjustment Mouse mode Return/Cancel Direction control Conrm Menu(dierent menu shown based on APPs) Return to desktop/Desktop switch Number keyboard CHAPTER THREE WARRANTY AND AFTER-SALES COMMITMENT 2.5 WIRELESS KEYBOARD, MOUSE, GAME CONTROLLER AND OTHER EXTENSION PARTS 3.1 TJ800 TV WARRANTY COMMITMENT TJ800 Mini TV and its enclosed accessories provide one-year warranty as of the 3.2 TJ800 TV AFTER-SALES COMMITMENT Users can enjoy the lifetime after-sales service after the one-year warranty expires. Keyboard and mouse: this TV supports most USB wired or wireless date of sale. SCOPE OF REPAIR:
Bluetooth keyboards and mouses, just insert the connector into the No matter you purchase TJ800 TV through any sales channel, it provides 3.3 TJ800TV WARRANTY CERTIFICATE AND QUALIFICATION Game controller: this TV supports most USB wired or Bluetooth game Damages caused by natural disasters such as re, earthquake, typhoon and so on;
controllers(game controller needs to have built-in Bluetooth receiver), War, being used as an attack weapon, delibertately abuse or damage Product model:
Retailer signature:
The tamper-proof label on the back of the product case being torn o Date of purchase:
for game controllers usage and settings, please refer to its relevant user manual and the setting descriptions in dierent APPs. REPAIR APPROACHES:
warranty service. You can contact retailer or customer service personnel via logging on to the ocial website of Douzi Techonology Co., Ltd(douzitv.net). WARRANTY CERTIFICATE THE WARRANTY EXCLUDES THE FOLLOWING CONDITIONS:
Device MAC code:
User signature:
Mobile hard disk, U-disk, TF card: this product supports most mobile hard motherboard, speaker and so on. disks, U-disks and TF cards, as for TF card, it supports 128G maximum. Note: Some old USB devices may not work normally due to the compatibility issue. Repair or replacement is implemented based on specic faulty conditions, the parts which can be repaired or replaced include, but not limited to, screen, All the replaced parts, accessories or device should be brand-new. The replaced parts or accessories enjoy a warranty equal to the remaining duration of the one-year warranty or 90 days after the replacement, the longer one of the above-mentioned two periods prevails. Brand-new accessories should be used to replace if they have problems. Qualication Product model:
Inspector:
Ex-factory date:
Company name: Yunnan Dehong Douzi Technology Co., Ltd Company address: No. AS2-44, 2nd Floor, Xingchang Commercial Plaza, Menghuan Neighborhood, Mangshi, Dehong Prefecture, Yunnan, China FCC Statement FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna. --
Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 1 TVs USB socket. 2 5 Link successful 3 4 8 1 2 3 4 6 7 9 10 11 12 FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
Reorient the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.