all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual 1 | Users Manual | 287.23 KiB | ||||
1 |
|
Users Manual 2 | Users Manual | 269.09 KiB | ||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | Internal Photos | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Users Manual 1 | Users Manual | 287.23 KiB |
HANDHELD BHT, BHT lite, BHI, BHI Pro Manual
- Draft -
V07/06/05 BiTech Handheld Manual -DRAFT -
Copyright 2005 by deister electronic GmbH All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without prior written permission of Agrident GmbH. Agrident GmbH reserves the right to make changes to any and all parts of this documentation without obligation to notify any person or entity of such changes. June 2005 SE/BB deister electronic GmbH Hermann-Bahlsen-Str. 11 30890 Barsinghausen Germany Telefon: +49 (0) 51 05 - 51 61 11 Telefax: +49 (0) 51 05 - 51 62 17 E-Mail: info@deister-gmbh.de Web: www.deister.com 2 deister electronic GmbH 30890 Barsinghausen Germany V07/06/05 BiTech Handheld Manual - DRAFT -
Contents Introduction .....................................................................5 1 The 8 keys for the operation....................................................................................... 6 1.1 The status messages in the second line of the DISPLAY ................................................. 6 1.2 The acoustic signals .................................................................................................. 6 1.3 Operating the BiTech reader ..........................................7 2 Power on.................................................................................................................. 7 2.1 Start READ................................................................................................................ 7 2.2 Quick start ............................................................................................................... 7 2.3 No ID found............................................................................................................. 8 2.4 DISPLAY and SAVE of an ID.............................................9 3 Standard mode without ACTION CODE ..................................................................... 9 3.1 Modus with ACTION CODE ASK ............................................................................... 9 3.2 Modus with ACTION CODE AUTO............................................................................ 9 3.3 Modus with an alphanumeric FORMAT of the ACTION CODE ..................................... 9 3.4 Modus with ACTION CODE PLUS function ................................................................. 9 3.5 Modus DISPLAY ...................................................................................................... 10 3.6 The SETUP of the BiTech reader ....................................10 4 Operation within the menu ...................................................................................... 10 4.1 The OPERATION menu ........................................................................................... 10 4.2 4.2.1 LAST ID.................................................................................................................. 11 4.2.2 HOTKEY A and HOTKEY B...................................................................................... 11 The SETUP menu .................................................................................................... 12 4.3 RF/ID menu............................................................................................................ 12 4.3.1 4.3.2 BAUDRATE............................................................................................................. 12 4.3.3 DISPLAY................................................................................................................. 12 4.3.4 DISPLAY FORMAT................................................................................................... 13 TIME and DATE ...................................................................................................... 14 4.3.5 4.3.6 VOLUME of Acoustic Signals.................................................................................... 14 POWER MANAGER ................................................................................................ 14 4.3.7 4.3.8 SOFTWARE VERSION ............................................................................................. 14 4.3.9 DEFAULT ............................................................................................................... 14 4.4 The DATA MENU.................................................................................................... 14 4.4.1 MEMORY SPACE.................................................................................................... 15 SHOW DATA ......................................................................................................... 15 4.4.2 4.4.3 SHOW TAG LIST .................................................................................................... 15 4.4.4 USR TAG LIST......................................................................................................... 15 4.4.5 DATA SEND ........................................................................................................... 15 LINK LIST SEND ...................................................................................................... 15 4.4.6 The DEFAULT setting......................................................16 5 6 Technical Data ...............................................................17 V07/06/05 deister electronic GmbH 30890 Barsinghausen Germany 3 BiTech Handheld Manual -DRAFT -
4 deister electronic GmbH 30890 Barsinghausen Germany V07/06/05 BiTech Handheld Manual - DRAFT -
1 Introduction The portable full-ISO BiTech readers are so small - they fit even into a shirt pocket - they have a very handy design and are easy to operate even under worse conditions. The readers are compatible to the ISO standard 11785 and read FDX-B and HDX. Tags with the widely used chip type H4102 can be read as well. The two HOTKEYES can be programmed individually and combined with a special action. Furthermore any read ID could be combined with an ACTION CODE to combine useful information with the transponder ID. A look-up table can be downloaded to the reader to show additional information to the transponder ID. The BiTech readers have an integrated real-time clock; every ID will be stored with a time stamp. The large memory is sufficient for 2000 IDs, including time stamp and ACTION CODE. The large backlit display has 2 x 16 characters and is very readable. An ergonomic keyboard with 8 keys ensure easy and comfortable operation. The robust case is IP 54 protected and withstands even harsh environments. The BiTech reader is prepared for wireless data communication, loading and power supply together with the BiTech Cradle. Some of the outstanding features of the BiTech readers are ACTION CODES To combine useful information with a transponder ID the BiTech reader offers the ACTION CODES. They can be a numeric value from 1 to 99 or more comfortable an alphanumeric string of up to 10 digits. The alphanumeric strings have to be loaded into the BiTech reader. The ACTION CODE can be combined with the ID after reading automatically or can be chosen out of the list with the SCROLL keys. ACTION CODE PLUS As a further enhancement this function allows to add an additional numeric value from 0 to 99 to the ACTION CODE. HOTKEYS A HOTKEY is more than a simple READ button. It could be programmed to do a lot more than a simple read. With the HOTKEY you can start a complete sequence of functions by just pressing one button. As the BiTech readers have two HOTKEYS, you can program them individually for different tasks. V07/06/05 deister electronic GmbH 30890 Barsinghausen Germany 5 BiTech Handheld Manual -DRAFT -
Basic operation of BiTech readers 1.1 The 8 keys for the operation ON/OFF - Switch power on/off HOTKEY A Starts a READ and or additional functions HOTKEY B Starts a READ and or additional functions F Switch into MENU modus C In MENU modus one level up RETURN Conformation of changes in the MENU modus and one level down
- SCROLL up Move or Value higher
- SCROLL down Move or Value lower 1.2 The status messages in the second line of the DISPLAY Battery empty, if capacity is as low as 5 to 10%
Memory full!, appears if memory is full Online modus, if the reader is connected with a PC via cable Cradle, if the reader is connected with a PC via docking station RAM ERROR, at failures in memory 1.3 The acoustic signals One BEEP = keyboard BEEP 4 times BEEP = OK (ID read) Long BEEP = NOK (no ID read) High/low BEEP = double read (into one minute) Keyboard BEEP but longer = ACTION BEEP 6 deister electronic GmbH 30890 Barsinghausen Germany V07/06/05 BiTech Handheld Manual - DRAFT -
2 Operating the BiTech reader Before starting operation of the BiTech reader, the batteries being supplied separately have to be put in the battery case. In case that you would like to use other types of batteries, resp. rechargeable batteries, please read chapter 4.3.7 POWER MANAGER to set the battery type. Caution! An other battery type than it is chosen in the selection list of the power manager, might cause harm to the reader. 2.1 Power on After the reader is switched on with the ON/OFF key, the DISPLAY can be switched between four different formats by pressing the keys:
BiTech V. 1.71
<-- 1 2 -->
Software version and ACTION CODE numbers BiTech V. 1.71 31.01.05 10:14 Date and time BiTech V. 1.71 Battery OK Battery condition BiTech V. 1.71 Data 0/2100 Memory use 2.2 Start READ After switch on the reader with the ON/OFF key a READ is started with one of the HOTKEYS, any other action that is connected with the HOTKEY (A or B) will run automatically after reading. READ HOTKEY A
. 2.3 Quick start With the HOTKEY A or B the reader starts directly into the READ modus. After reading, any other action that is connected with the HOTKEY (A or B) will run automatically. READ HOTKEY A
. V07/06/05 deister electronic GmbH 30890 Barsinghausen Germany 7 BiTech Handheld Manual -DRAFT -
2.4 No ID found If there is no transponder in the field of the antenna or no valid ID is received (e.g. a faulty transponder or too much noise). Display:
NO TRANSPONDER Action stopped A new read could be started by pressing HOTKEY A or B. 8 deister electronic GmbH 30890 Barsinghausen Germany V07/06/05 BiTech Handheld Manual - DRAFT -
3 DISPLAY and SAVE of an ID 3.1 Standard mode without ACTION CODE The ID will be displayed in the upper line. In SAVE MODE = ASK, in the second line SAVE? YES/NO will be displayed. 980 123456789012 SAVE? YES Save with RETURN, reject with C or a new reading. In the AUTO MEMORY MODE the ID will be saved automatically, 980 123456789012 SAVED The complete content of the data file regarding that transponder could be checked by using the SCROLL up/down buttons. 3.2 Modus with ACTION CODE ASK Displays at the second line ACTION CODE = XX. 980 123456789012 AC = XX The value of AC could be adjusted with the SCROLL KEYS and confirmed with RETURN. The AC starts with the value chosen under HOTKEY- AC CODE. There set for the preferred AC, a use of the SCROLL is only needed when another AC is wished. 3.3 Modus with ACTION CODE AUTO Displays while reading the chosen ACTION CODE (see HOT KEY MENU) and shows after read the ID:
980 123456789012 Saved 3.4 Modus with an alphanumeric FORMAT of the ACTION CODE Displays a text of up to 10 digits for the ACTION CODE. The value of AC could be adjusted with the SRCOLL KEYS and confirmed by RETURN. 980 123456789012 AC = weighing 3.5 Modus with ACTION CODE PLUS function This function allows combining an ID with a fixed or variable ACTION CODE and an additional numeric value. ACTION CODE in the HOTKEY MENU can determine the fixed ACTION CODE. The variable ACTION CODE can be chosen with the SCROLL keys and confirmed by RETURN. The additional value can also be chosen with the SCROLL buttons from 0 to 99 and then confirmed by RETURN. V07/06/05 deister electronic GmbH 30890 Barsinghausen Germany 9 BiTech Handheld Manual -DRAFT -
980 123456789012 AC = weighing 980 123456789012 0 Add Value 3.6 Modus DISPLAY Shows an alphanumeric ALIAS that is connected with the transponder ID in the link list. XXXXXXXXXX Saved 4 The SETUP of the BiTech reader By pressing Key F the handheld changes to the MAIN MENU. The Options of the main menu are:
! SETUP OPERATION DATA SETUP contains all settings for the READER that are valid for both HOTKEYS. OPERATION has all the functions that could be programmed individually for each HOTKEY. DATA has all the functions for the handling of data in the memory. 4.1 Operation within the menu The SCROLL keys are used to move within the MENU structure. The confirmation of the indicated MENU value with RETURN changes into that SUBMENU. C jumps back to the higher level of the MENU. F jumps always back to the MAIN MENU. A changeable value or data is displayed at the second line and can be selected by the SCROLL keys and confirmed by RETURN. Return to the higher level without change by C. In case of a YES/NO decision in the second line the value will be confirmed with RETURN and rejected by C. After the confirmation the APR jumps back to the next higher level of the MENU. 4.2 The OPERATION menu It has the following submenus
-> LAST ID HOTKEY A HOTKEY B 10 deister electronic GmbH 30890 Barsinghausen Germany V07/06/05 BiTech Handheld Manual - DRAFT -
4.2.1 LAST ID Shows the last 10 IDs. The IDs could be saved if they are not in the memory yet. Last ID X/10 S XXX XXXXXXXXXX Shows number X out of the last ten. With SCROLL keys move to the searched ID and select the ID with the ENTER key. The complete data of this ID will be displayed by using the SCROLL keys. S shows that the ID is saved already. If the ID is not saved yet, pressing ENTER again could save it. Last ID SAVE NO YES Selection YES/NO with SCROLL buttons and confirmation with ENTER. 4.2.2 HOTKEY A and HOTKEY B Determine which HOTKEY (A or B) will be programmed. The Submenus are only valid for the chosen HOTKEY. HOTKEY has the following options o MODE o AC CODE o SAVE MODE MODE appoints how the ACTION CODE is combined with the ID number o No ACTION CODE, no ACTION CODE will be shown or requested. o AC ASK, after reading an ID, the reader asks for an ACTION CODE that can be selected by the SCROLL keys and confirmed with ENTER. o ASSIGN ASK, ALIAS IDs in the link list that are not already linked with an ID, will be shown. By scrolling up and down one alias can be chosen and confirmed with ENTER. Then alias and ID are linked until the link list is deleted. o ASSING ASK SAVE, the assigned link will be saved automatically. o AC AUTO PLUS, a certain ACTION CODE that is defined at AC CODE (see below) will be automatically saved with a read ID. After reading the ID with the SCROLL keys an additional numeric value can be chosen. o AC ASK PLUS, an ACTION CODE and a numeric value can be linked to the ID being read. o AC AUTO, a certain ACTION CODE that is defined at AC CODE (see below) will be automatically saved with a read ID. AC CODE, determines an ACTION CODE by SCROLL keys for that HOTKEY. It will be automatically saved when read an ID. SAVE MODE determines how a read ID will be saved. o AUTO saves the ID automatically. o ASK requires the confirmation of SAVE with YES/NO after read. V07/06/05 deister electronic GmbH 30890 Barsinghausen Germany 11 BiTech Handheld Manual -DRAFT -
4.3 The SETUP menu Comes with the submenus
-> RF/ID BAUDRATE DISPLAY DISPLAY FORMAT TIME/DATE VOLUME POWER MANAGER SOFTWARE VERS. DEFAULT 4.3.1 RF/ID menu Consist of all functions for reading a transponder. READ LENGTH DOUBLE READ READ LENGHT Determines how many (xx) seconds the reader tries to read a transponder. Read Length
= XX Seconds Choose by SCROLL keys and confirm by RETURN. DOUBLE READ defines if the same transponder will not be read into a certain time period. The value for the period can be OFF, 15, 30,45 and 60 seconds. Choose by SCROLL keys and confirm by RETURN. 4.3.2 BAUDRATE Consist of the settings of the interface valid values from 9600 to 57600, choose by SCROLL keys and confirm by RETURN. 4.3.3 DISPLAY All commands concerning the display are found here.
-> LANGUAGE POWER OFF CONTRAST BRIGHTNESS LIGHT OPTION 12 deister electronic GmbH 30890 Barsinghausen Germany V07/06/05 BiTech Handheld Manual - DRAFT -
LANGUAGE (English/Deutsch)
-> ENGLISH DEUTSCH Choose by SCROLL keys and confirm by RETURN. LIGHT OPTION
-> ON AT EXT POWER OFF AT EXT POWER If LIGHT is switched ON/OFF when the reader is powered externally. CONTRAST
-> Contrast = X Choose from 1 to 5 with SCROLL keys and confirm by RETURN. BRIGHTNESS as CONTRAST POWER OFF
-> POWER OFF XX SECONDS Choose XX from 3 to 20 by SCROLL keys and confirm by RETURN. 4.3.4 DISPLAY FORMAT Consist of all commands that determine how a transponder ID is displayed and saved. It has the following options:
-> VISION FORMAT AC FORMAT HOT K ALIAS IF AVAIL VISION FORMAT determines how the transponder ID is displayed. ISO Mode STD ISO Mode STD ISO Mode STD ISO Mode STD BDE/HEX Format BDE/HEX Format BDE/HEX Format BDE/HEX Format HEX Inv. Format HEX Inv. Format HEX Inv. Format HEX Inv. Format BiTech Format BiTech Format BiTech Format BiTech Format Telindus Telindus Telindus Telindus animal ISO mode hexadecimal transponder ID hexadecimal transponder ID, displayed in opposit direction transponder ID in Bitech mode transponder ID in Bitech mode (customers application) Change value by SCROLL confirm by RETURN. AC FORMAT HOT K determines if the ACTION CODE is displayed as alpha or numeric value. Alpha works only, if a list of alphanumeric ACTION CODES is loaded into the BiTech reader. ALIAS IF AVAIL, if set to ON, the alias of the transponder will be displayed instead of the transponder ID. This works only, if a TAG LIST is loaded into the BiTech reader and an alias for the read transponder is available. If set to OFF the transponder ID will always be displayed. V07/06/05 deister electronic GmbH 30890 Barsinghausen Germany 13 BiTech Handheld Manual -DRAFT -
4.3.5 TIME and DATE Offer different options to set time and date.
-> SET TIME TIME FORMAT SET DATE DATE FORMAT SET TIME, change value by SCROLL, confirm by RETURN. TIME FORMAT, could be chosen between 12 or 24 h. SET DATE, change value by SCROLL, confirm by RETURN. DATE FORMAT, could be chosen between dd.mm.yy and mm.dd.yy. 4.3.6 VOLUME of Acoustic Signals Change value 0 to 15 by SCROLL confirm by RETURN. 4.3.7 POWER MANAGER For the selection of the battery type. AKKU means rechargeable batteries, the capacity determine the needed power for recharging. BATTERY AKKU > 2000 mA AKKU 1500-2000 mA AKKU 1000-1500 mA Change value by SCROLL confirm by RETURN. 4.3.8 SOFTWARE VERSION Displays the version and date of release of the current software, loader version and the serial number. 4.3.9 DEFAULT Sets all values back to factory settings (see 5. default settings) 4.4 The DATA MENU With the submenus
-> MEMORY SPACE SHOW DATA SHOW TAG LIST USR TAG LIST DATA SEND LINKLIST SEND 14 deister electronic GmbH 30890 Barsinghausen Germany V07/06/05 BiTech Handheld Manual - DRAFT -
4.4.1 MEMORY SPACE Displays the current use of the memory, with the SCROLL keys also the amount of data in the link and ACTION CODES list could be displayed. 4.4.2 SHOW DATA Display the data in the memory. Move with the SCROLL keys through the data. When you choose a particular data with RETURN it switches into DATA VIEW MODUS. SHOW DATA ZX 980 123456789012 The complete data can be displayed by scrolling with the SCROLL keys through the lines. ZX is the number of the data line. AC is the number of the ACTION CODE. HDX, FDXB or 4002 are the transponder types HDX, FDX-B or H4002. 4.4.3 SHOW TAG LIST Displays the transponder ID and the alias, if a link list is loaded into the BiTech reader. SHOW TAG L X U ALIAS 1 SHOW TAG L X P ALIAS 1 X is the number of the alias, U means it is already assigned, P means it is not assigned yet (Free). 4.4.4 USR TAG LIST Displays the ALIAS already assigned to a transponder ID since the last download of the TAG LIST. USR TAG LI X U ALIAS 1 With RETURN chose and open the displayed file. Back with C 4.4.5 DATA SEND Sends the complete content of the data memory to a PC and can be saved with a software like hyperterminal. 4.4.6 LINK LIST SEND Sends the content of the link list to a PC, if you already have downloaded one into the BiTech reader. V07/06/05 deister electronic GmbH 30890 Barsinghausen Germany 15 BiTech Handheld Manual -DRAFT -
5 The DEFAULT setting The BiTech readers come with the following default setting:
ISO MODE STD Both HOTKEYS with the same function o READ = YES o Confirm SAVE = YES o AC mode = OFF (Value 0) o DISPLAY FORMAT = BiTech Format o Show DISPLAY = 5 seconds RF/ID - READ LENGTH = 7 seconds TRANSPONDER = HDX, FDX-B, 4002 DISPLAY = BiTech Format COUNTRY CODE = Decimal VOLUME = 5 Language = English Changes in the setting will be saved automatically. With the DEFAULT function in the SETUP menu the default settings will be restored. 16 deister electronic GmbH 30890 Barsinghausen Germany V07/06/05 BiTech Handheld Manual - DRAFT -
6 Technical Data Frequency 134,2 kHz Transponder types HDX compatible (ISO 11784/5) FDX-B compatible (ISO 11784/5) H4002 compatible (optional) Reading range:
Approx. 15 cm with HDX transponder 30 mm Approx. 10 cm with FDX-B transponder 30 mm Interfaces Cradle Power supply 2 x 1,5V AA mignon batteries External power supply via cradle Recharge via cradle Protection IP 54 Temperature range 0 to 60C Measurements and weight LxWxH 175x90x36 mm, approx. 350 g V07/06/05 deister electronic GmbH 30890 Barsinghausen Germany 17 BiTech Handheld Manual -DRAFT -
Regulatory notices Regulatory notices for Europe:
Hereby, deister electronic GmbH declares that this equipment - if used according to the instructions
- is in compliance with the essential requirements and other relevant provisions of the RTTE Directive 1999/5/ EC. Zulassungen fr Europa:
Hiermit erklrt die deister electronic GmbH, dass sich diese Funkanlage bei bestimmungsgemer Verwendung in bereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der RTTE Richtlinie 1999/5/EG befindet.
! A complete declaration of conformity can be requested at:
" Eine vollstndige Konformittserklrung kann angefordert werden unter:
info@deister-gmbh.de Regulatory notices for USA:
FCC digital device limitations Radio and television interference This equipment has been tested and found to comply with the limits for a digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 18 deister electronic GmbH 30890 Barsinghausen Germany V07/06/05 BiTech Handheld Manual - DRAFT -
V07/06/05 deister electronic GmbH 30890 Barsinghausen Germany 19 deister worldwide Germany:
deister electronic GmbH Hermann-Bahlsen-Str. 11 30890 Barsinghausen Tel.: +49 (0) 51 05 - 51 61 11 Fax: +49 (0) 51 05 - 51 62 17 info@deister-gmbh.de www.deister.com Great Britain:
deister electronic (UK) Ltd. Camelgate, Spalding Lincolnshire PE12 6ET Tel.:+44 (0) 1775 - 717100 Fax:+44 (0) 1775 - 717101 info@deister.co.uk USA:
deister electronic USA Inc. 9303 Grant Avenue Manassas, VA 22110 Tel.:+1 703 - 368 2739 Fax:+1 703 - 368 9791 info@deister.com Canada:
deister electronic Inc. 1099 Kingston Road, Suite 212 Pickering ON. L1V 1B5 Tel.:+1 905 - 837 5666 Fax:+1 905 - 837 0777 info@deister-electronic.com Belgium & Luxemburg:
deister electronic office Business Park E 19 Battelsesteenweg 455/A 2800 Mechelen Tel.:+32 (0) 15 - 28 09 68 Fax:+32 (0) 15 - 28 09 71 info@benelux.deister.com The Netherlands:
deister electronic office Tolnasingel 3 2411 PV Bodegraven Tel.:+31 (0) 1726 - 32970 Fax:+31 (0) 1726 - 32971 info@nl.deister.com France:
deister electronic france 101 rue Pierre Semard 92320 Chatillon Tel.:+33 (0) 1 47 - 35 78 78 Fax:+33 (0) 1 47 - 35 92 59 info@deister.fr
1 | Users Manual 2 | Users Manual | 269.09 KiB |
Agrident GmbH, Hermann Bahlsen Str. 11-13, D-30890 Barsinghausen Phone +49 5105 520614 - Fax +49 5105 520616 APR Handheld Reader Operation Manual D R A F T V07/06/05 APR300/400 Copyright 2005 by Agrident GmbH All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without prior written permission of Agrident GmbH. Agrident GmbH reserves the right to make changes to any and all parts of this documentation without obligation to notify any person or entity of such changes. June 2005 Agrident GmbH Hermann-Bahlsen-Str. 11-13 30890 Barsinghausen Germany Phone +49 (0) 51 05 520614 Fax +49 (0) 51 05 520616 E-Mail: mail@agrident.com www.agrident.com 07.06.05 Vertraulich / Confidential Page 2 of 19 APR300/400 Contents 1. 2. 2.1 2.2 2.3 3.1 3.2 3.3 3.4 4.1 4.2 4.3 4.4 4.5 4.6 Introduction .........................................................................................................5 BASIC operation of APR readers ............................................................................6 The 8 keys for the operation .....................................................................6 The status messages in the second line of the DISPLAY .........................6 The acoustic signals..................................................................................6 3. Operating the APR..............................................................................................7 Power on...................................................................................................7 Start READ ...............................................................................................7 Quick start.................................................................................................7 No ID found...............................................................................................7 4. DISPLAY and SAVE of an ID..............................................................................8 Standard mode without ACTION CODE ...................................................8 Modus with ACTION CODE ASK..............................................................8 Modus with ACTION CODE AUTO ...........................................................8 Modus with an alphanumeric FORMAT of the ACTION CODE.................8 Modus with ACTION CODE PLUS function ..............................................8 Modus DISPLAY ANIMAL ID ....................................................................9 The SETUP of the APR ......................................................................................9 Operation within the menu ........................................................................9 The OPERATION menu............................................................................9 LAST ID ..........................................................................................9 HOTKEY A and HOTKEY B..........................................................10 The SETUP menu...................................................................................10 RF/ID menu...................................................................................10 BAUDRATE ..................................................................................11 ONLINE MODE.............................................................................11 DISPLAY.......................................................................................11 DISPLAY FORMAT.......................................................................12 TIME and DATE............................................................................13 VOLUME of Acoustic Signals........................................................13 POWER MANAGER .....................................................................13 SOFTWARE VERSION.................................................................13 DEFAULT......................................................................................13 5.3.1 5.3.2 5.3.3 5.3.4 5.3.5 5.3.6 5.3.7 5.3.8 5.3.9 5.3.10 5.2.1 5.2.2 5.1 5.2 5.3 5. 07.06.05 Vertraulich / Confidential Page 3 of 19 APR300/400 5.4 The DATA MENU....................................................................................13 MEMORY SPACE.........................................................................13 5.4.1 SHOW DATA ................................................................................14 5.4.2 SHOW TAG LIST..........................................................................14 5.4.3 USR TAG LIST..............................................................................14 5.4.4 CLEAR DATA ...............................................................................14 5.4.5 CLEAR MEMORY.........................................................................14 5.4.6 MEMORY FULL ............................................................................14 5.4.7 CLEAR LIST .................................................................................14 5.4.8 DATA SEND .................................................................................14 5.4.9 5.4.10 LINK LIST SEND...........................................................................15 6. The DEFAULT setting.......................................................................................15 7. Technical Data..................................................................................................16 8. Safety and care.................................................................................................17 9. Regulatory notices ............................................................................................18 07.06.05 Vertraulich / Confidential Page 4 of 19 APR300/400 1. Introduction The portable full-ISO APR readers from Agrident are so small - they fit even into a shirt pocket - they have a very handy design and are easy to operate even under worse conditions. The readers are compatible to the ISO standard 11785 and read FDX-B and HDX. Tags with the widely used chip type H4102 can be read as well. The two HOTKEYES can be programmed individually and combined with a special action. Furthermore any read ID could be combined with an ACTION CODE to combine useful information with the transponder ID. A look-up table can be downloaded to the reader to show animal live numbers or farm numbers additional to the transponder ID. The APR readers have an integrated real-time clock; every ID will be stored with a time stamp. The large memory is sufficient for 2000 IDs, including time stamp and ACTION CODE. The large backlit display has 2 x 16 characters and is very readable. An ergonomic keyboard with 8 keys ensure easy and comfortable operation. The robust case is IP 54 protected and withstands even harsh environments. The APR300 is prepared for wireless data communication, loading and power supply together with the docking station ADS100/200. Some of the outstanding features of the APR readers are ACTION CODES To combine useful information with a transponder ID the APR reader offers the ACTION CODES. They can be a numeric value from 1 to 99 or more comfortable an alphanumeric string of up to 10 digits. The alphanumeric strings have to be loaded into the APR. The ACTION CODE can be combined with the ID after reading automatically or can be chosen out of the list with the SCROLL keys. ACTION CODE PLUS As a further enhancement this function allows to add an additional numeric value from 0 to 99 to the Action Code. HOTKEYS A HOTKEY is more than a simple READ button. It could be programmed to do a lot more than a simple read. With the HOTKEY you can start a complete sequence of functions by just pressing one button. As the APR readers have two HOTKEYS, you can program them individually for different tasks. When a big portion of a days work is the same task, e.g. the recording of the number of newborn piglets of a sow, a very useful solution is possible with the ACTION CODE plus function. This function is programmed to one of the HOTKEYS and the ACTION CODE for number of new born piglets is defined. After pressing that HOTKEY, the APR will read the ID of the sow, add the ACTION CODE automatically and asks for the value. With the SCROLL keys the number of piglets is chosen and confirmed with ENTER. Then all information needed is saved into the data field. The other HOTKEY could be programmed with another task or with the ACTION CODE ASK function for various tasks. 07.06.05 Vertraulich / Confidential Page 5 of 19 APR300/400 2. BASIC operation of APR readers 2.1 The 8 keys for the operation{ XE "Keyboard" }
ON/OFF - Switch power on/off HOTKEY A Starts a READ and or additional functions HOTKEY B Starts a READ and or additional functions F Switch into MENU Modus C In MENU Modus one level up RETURN Conformation of changes in the MENU Modus and one level down
- SCROLL up Move or Value higher
- SCROLL down Move or Value lower 2.2 The status messages in the second line of the DISPLAY{ XE
"Status messages" }
Battery empty, if capacity is as low as 5 to 10%
Memory full! , appears if memory is full Online modus, if the reader is connected with a PC via cable Cradle, if the reader is connected with a PC via docking station RAM ERROR, at failures in memory 2.3 The acoustic signals{ XE "Acoustic signals" }
One BEEP = keyboard BEEP 4 times BEEP = OK (ID read) Long BEEP = NOK (no ID read) High/low BEEP = double read (into one minute) Keyboard BEEP but longer = ACTION BEEP 07.06.05 Vertraulich / Confidential Page 6 of 19 APR300/400 3. Operating the APR Power on{ XE "Power on" }
Before starting operation of the APR reader, the batteries being supplied separately have to be put in the battery case. In case that you would like to use other types of batteries, resp. rechargeable batteries, please read chapter 5.3.8 POWER MANAGER to set the battery type. Caution! An other battery type than it is chosen in the selection list, might cause harm to the reader. 3.1 After the reader is switched on with the ON/OFF key, the DISPLAY is switching between four different formats:
AGRIDENT V X.X XX.XX.XX XX:XX Date and time AGRIDENT V X.X Battery X.XX V Battery condition AGRIDENT V X.X Memory X/XXXX Memory use AGRIDENT V X.X Ext. Power off/on Type of power supply 3.2 Start READ{ XE "Read" }
After switch on the reader with the ON/OFF key a READ is started with one of the HOTKEYS, any other action that is connected with the HOTKEY (A or B) will run automatically after reading. READ HOTKEY A
. 3.3 Quick start{ XE "Quick start" }
With the HOTKEY A or B the reader starts direct into the READ modus. After reading, any other action that is connected with the HOTKEY (A or B) will run automatically. READ HOTKEY A
. 3.4 No ID found{ XE "No transponder" }
If there is no transponder in the field of the antenna or nor valid ID is received (e.g. a faulty transponder or too much noise). Display:
NO TRANSPONDER Action stopped A new read could be started by pressing HOTKEY A or B. 07.06.05 Vertraulich / Confidential Page 7 of 19 APR300/400 4. DISPLAY and SAVE of an ID{ XE "Save mode" }
4.1 Standard mode without ACTION CODE{ XE "Save without AC" }
The ID will be displayed in the upper line. In SAVE MODE = ASK, in the second line SAVE Y/N will be displayed. 980 123456789012 SAVE? YES Save with RETURN, reject with C or a new reading. In the AUTO MEMORY MODE the ID will be saved automatically, 980 123456789012 SAVED The complete content of the data file regarding that transponder could be checked by using the SCROLL up/down buttons. 4.2 Modus with ACTION CODE ASK{ XE "Save with AC" }
Displays at the second line ACTION CODE = XX. 980 123456789012 AC = XX The value of AC could be adjusted with the SCROLL KEYS and confirmed with RETURN. The AC starts with the value chosen under HOTKEY- AC CODE. There set for the preferred AC, a use of the SCROLL is only needed when another AC is wished. 4.3 Modus with ACTION CODE AUTO Displays while reading the chosen ACTION CODE (see HOT KEY MENU) and shows after read the ID:
980 123456789012 Saved 4.4 Modus with an alphanumeric FORMAT of the ACTION CODE Displays a text of up to 10 digits for the ACTION CODE. The value of AC could be adjusted with the SRCOLL KEYS and confirmed by RETURN. 980 123456789012 AC = weighing 4.5 Modus with ACTION CODE PLUS function{ XE "Save with Action Code plus" }
This function allows combining an ID with a fixed or variable ACTION CODE and an additional numeric value. ACTION CODE in the HOTKEY MENU can determine the fixed Action Code. The variable Action Code can be chosen with the SCROLL keys and confirmed by RETURN. The additional value can also be chosen with the SCROLL buttons from 0 to 99 and then confirmed by RETURN. 980 123456789012 AC = weighing 980 123456789012 0 Add Value 07.06.05 Vertraulich / Confidential Page 8 of 19 APR300/400 4.6 Modus DISPLAY ANIMAL ID{ XE "Animal ID" }
Shows an alphanumeric ALIAS as ANIMAL ID that is connected with the TAG ID in the link list. CHARLIE 22 Saved 5. The SETUP of the APR{ XE "Main menu" }
By pressing Key F the APR change to the MAIN MENU. The Options of the main menu are:
SETUP OPERATION DATA SETUP contains all settings for the READER that is valid for both HOTKEYS. OPERATION has all the functions that could be programmed individually for each HOTKEY. DATA has all the functions for the handling of data in the memory. 5.1 Operation within the menu{ XE "Operation within the menu" }
The SCROLL keys are used to move within the MENU structure. The confirmation of the indicated MENU value with RETURN changes into that SUBMENU. C jumps back to the higher level of the MENU. F jumps always back to the MAIN MENU. A changeable value or data is displayed at the second line and can be selected by the SCROLL keys and confirmed by RETURN. Return to the higher level without change by C. In case of a YES/NO decision in the second line the value will be confirmed with RETURN and rejected by C. After the confirmation the APR jumps back to the next higher level of the MENU. 5.2 The OPERATION menu{ XE "Operation menu" }
Have the following submenus
-> LAST ID HOTKEY A HOTKEY B 5.2.1 LAST ID{ XE "Last ID" }
Shows the last 10 IDs. The IDs could be saved if they are not in the memory yet. Last ID X/10 S XXX XXXXXXXXXX Shows number X out of the last ten. With SCROLL keys move to the searched ID and select the ID with the ENTER key. The complete data of this ID will be displayed by using the SCROLL keys. S shows that the ID is saved already. If the ID is not saved yet, pressing ENTER again could save it. Last ID SAVE NO YES Selection YES/NO with SCROLL buttons and confirmation with ENTER. 07.06.05 Vertraulich / Confidential Page 9 of 19 APR300/400 o MODE o AC CODE o SAVE MODE 5.2.2 HOTKEY A and HOTKEY B{ XE "HOTKEY" }
Determine which HOTKEY (A or B) will be programmed. The Submenus are only valid for the chosen HOTKEY. HOTKEY has the following options MODE appoints how the Action Code is combined with the ID number selected by the SCROLL keys and confirmed with ENTER. o No Action Code, no Action Code will be shown or requested. o AC ASK, after reading an ID, the reader asks for an ACTION CODE that can be o ASSIGN ASK, ALIAS IDs in the link list that are not already linked with an ID, will be shown. By scrolling up and down one alias can be chosen and confirmed with ENTER. Then alias and ID are linked until the link list is deleted. o ASSING ASK SAVE, the assigned link will be saved automatically. o AC AUTO PLUS, a certain Action Code that is defined at AC CODE (see below) will be automatically saved with a read ID. After reading the ID with the SCROLL keys an additional numeric value can be chosen. o AC ASK PLUS, an ACTION CODE and a numeric value can be linked to the ID o AC AUTO, a certain Action Code that is defined at AC CODE (see below) will be being read. automatically saved with a read ID. AC CODE, determines an ACTION CODE by SCROLL keys for that HOTKEY. It will be automatically saved when read an ID. SAVE MODE determines how a read ID will be saved. o AUTO saves the ID automatically. o ASK requires the confirmation of SAVE with YES / NO after read. 5.3 The SETUP menu{ XE "Setup menu" }
Comes with the submenus
-> RF/ID BAUDRATE ONLINEMODE DISPLAY DISPLAY FORMAT TIME/DATE VOLUME POWER MANAGER SOFTWARE VERS. DEFAULT 5.3.1 RF/ID menu{ XE "RF/ID menu" }
Consist of all function for reading a transponder. TRANSPONDER READ LENGTH WIRELESS SYNC DOUBLE READ 07.06.05 Vertraulich / Confidential Page 10 of 19 APR300/400 TRANSPONDER has the following options for choosing the transponder type, that should be read HDX FDX H4002 HDX- -
FDX HDX FDX -
- - H4002 HDX- - H4002
- FDX - H4002 Choose by SCROLL keys and confirm by RETURN. READ LENGHT Determines how many (xx) seconds the reader tries to read a transponder. Read Length
= XX Seconds Choose by SCROLL keys and confirm by RETURN. WIRELESS synchronisation improves the reading in an environment with other stationary ISO readers. WIRE LESS SYNC Yes/No Choose by SCROLL keys and confirm by RETURN. DOUBLE READ defines if the same transponder will not be read into a certain time period. The value for the period can be OFF, 15, 30,45 and 60 seconds. Choose by SCROLL keys and confirm by RETURN. 5.3.2 BAUDRATE{ XE "Communication" }
Consist of the settings of the interface valid values from 9600 to 57600, choose by SCROLL keys and confirm by RETURN. 5.3.3 ONLINE MODE{ XE "Online modus" }
Determines if the APR switches in the online modus while on cable or in a docking station and what data format is used.
-> OFF DATA LONG DATA SHORT OFF means that the APR reader switch not automatically into online modus if it is connected to a PC. DATA LONG transmits the complete data file. DATA SHORT transmits the transponder ID only. Choose with SCROLL keys and confirm by RETURN. 5.3.4 DISPLAY{ XE "Display" }
All commands concerning the display are found here.
-> LANGUAGE POWER OFF CONTRAST BRIGHTNESS LIGHT OPTION LANGUAGE (English/Deutsch)
-> ENGLISH DEUTSCH Choose by SCROLL keys and confirm by RETURN. 07.06.05 Vertraulich / Confidential Page 11 of 19 APR300/400 LIGHT OPTION
-> ON AT EXT POWER OFF AT EXT POWER If LIGHT is switched ON/OFF when the APR is powered externally. CONTRAST
-> Contrast = X Choose from 1 to 5 with SCROLL keys and confirm by RETURN. BRIGHTNESS as CONTRAST POWER OFF
-> POWER OFF XX SECONDS Choose XX from 3 to 20 by SCROLL keys and confirm by RETURN. 5.3.5 DISPLAY FORMAT{ XE "Display format" }
Consist of all commands that determine how a transponder ID is displayed and saved. It has the following options:
-> VISION FORMAT AC FORMAT HOT K ALIAS IF AVAIL ANIMAL TAG VISION FORMAT determines how the transponder ID is displayed. ISO MODE STD, the decoding of the TAG ID is concerning ISO 11784. ISO MODE COUNTRY, the decoding of the TAG ID is concerning ISO 11784. The country code is displayed as a 3-digit alpha code concerning ISO 3166, e.g. 0276 =
DEU. This option works only if a transponder has a valid country code. Otherwise the manufactures code is displayed numeric. BDE/HEX MODE, the transponder ID is displayed as an Hexadecimal number Change value by SCROLL confirm by RETURN. AC FORMAT HOT K determines if the Action Code is displayed as alpha or numeric value. Alpha works only, if a list of alphanumeric Action Codes is loaded into the APR. ALIAS IF AVAIL, if set to ON, the Alias of the transponder will be displayed instead of the transponder ID. This works only, if a TAG LIST is loaded into the APR and an Alias for the read transponder is available. If set to OFF the transponder ID will always be displayed. ANIMAL TAG, if set to ON, NO ANIMAL TAG will be displayed, when a transponder is read with animal flag =0. In this case you can read the transponder ID, when scrolling the display after reading. If set to OFF, the animal flag will not be interpreted. 07.06.05 Vertraulich / Confidential Page 12 of 19 APR300/400 5.3.6 TIME and DATE{ XE "Time and date" }
Offer different options to set time and date.
-> SET TIME TIME FORMAT SET DATE DATE FORMAT SET TIME, change value by SCROLL, confirm by RETURN. TIME FORMAT, could be chosen between 12 or 24 h. SET DATE, change value by SCROLL, confirm by RETURN. DATE FORMAT, could be chosen between dd.mm.yy and mm.dd.yy. 5.3.7 VOLUME of Acoustic Signals{ XE "Volume" }
Change value 0 to 15 by SCROLL confirm by RETURN. 5.3.8 POWER MANAGER{ XE "Power manager" }
For the selection of the battery type. AKKU means rechargeable batteries, the capacity determine the needed power for recharging. BATTERY AKKU > 2000 mA AKKU 1500-2000 mA AKKU 1000-1500 mA Change value by SCROLL confirm by RETURN. 5.3.9 SOFTWARE VERSION{ XE "Software version" }
Displays the version and date of release of the current software, loader Version and the Serial number. 5.3.10 DEFAULT{ XE "Default" }
Sets all values back to factory settings (see 6. default settings) 5.4 The DATA MENU { XE "Data menu" }
With the submenus
-> MEMORY SPACE SHOW DATA SHOW TAG LIST USR TAG LIST CLEAR DATA CLEAR MEMORY MEMORY FULL CLEAR LISTS DATA SEND LINKLIST SEND 5.4.1 MEMORY SPACE{ XE "Memory space" }
Displays the current use of the memory, with the SCROLL keys also the amount of data in the Link and Action Codes list could be displayed. 07.06.05 Vertraulich / Confidential Page 13 of 19 APR300/400 5.4.2 SHOW DATA{ XE "Show Data" }
Display the data in the memory. Move with the SCROLL keys through the data. When you choose a particular data with RETURN it switches into DATA VIEW MODUS. SHOW DATA ZX 980 123456789012 The complete data can be displayed by scrolling with the SCROLL keys through the lines. ZX is the number of the data line. AC is the number of the Action Code. HDX, FDXB or 4002 are the transponder types HDX, FDX-B or H4002. 5.4.3 SHOW TAG LIST{ XE "Tag List" }
Displays the TAG ID and the ANIMAL ID, if a link list is loaded into the APR. SHOW TAG L X U ALIAS 1 SHOW TAG L X P ALIAS 1 X is the number of the Alias, U means it is already assigned, P means it is not assigned yet
(Free). 5.4.4 USR TAG LIST{ XE "Tag List, USR" }
Displays the ALIAS already assigned to a transponder ID since the last download of the Tag List. USR TAG LI X U ALIAS 1 With RETURN chose and open the displayed file. Back with C 5.4.5 CLEAR DATA { XE "Clear data" }
Shows the data of ID in the memory. A single data file can be chosen with SCROLL and selected with RETURN. This displays the complete data file. After a second RETURN the chosen data file can be deleted. 5.4.6 CLEAR MEMORY{ XE "Clear memory" }
Deletes all data in the data memory. Choose with SCROLL and delete with RETURN. 5.4.7 MEMORY FULL{ XE "Memory full" }
Determines what action shall be taken in case of a full memory NO NEW DATA refuse further save of data, DELETE FIRST, overwrite the oldest entry in memory. 5.4.8 CLEAR LIST{ XE "Clear list" }
Deletes the link list and the text files for the Action Codes. 5.4.9 DATA SEND{ XE Send data to PC" }
Sends the complete content of the data memory to a PC and can be saved with a software like Hyperterminal. 07.06.05 Vertraulich / Confidential Page 14 of 19 APR300/400 5.4.10 LINK LIST SEND{ XE "Send link list to PC" }
Sends the content of the link list to a PC, if you already have downloaded one into the APR. 6. The DEFAULT setting{ XE "Default setting" }
The APR readers come with the following default setting:
Both HOTKEYS with the same function ISO MODE STD o READ = YES o Confirm SAVE = YES o AC mode = OFF (Value 0) o DISPLAY FORMAT = ISO STANDARD o Show DISPLAY = 5 seconds RF/ID - READ LENGTH = 7 seconds TRANSPONDER = HDX, FDX-B, 4002 DISPLAY = ISO MODE decimal (3 digit Manufacturer/Country Code and 12 digit ID) COUNTRY CODE = Decimal ANIMAL CODE = OFF ONLINE MODUS = OFF VOLUME = 5 Language = English Changes in the setting will be saved automatically. With the DEFAULT function in the SETUP menu the default settings will be restored. 07.06.05 Vertraulich / Confidential Page 15 of 19 APR300/400 7. Technical Data{ XE "Technical data" }
Frequency 134,2 kHz Transponder types HDX compatible (ISO 11784/5) FDX-B compatible (ISO 11784/5) H4002 compatible (optional) Reading range:
Approx. 15 cm with HDX transponder 30 mm Approx. 10 cm with FDX-B transponder 30 mm Interfaces RS232 or USB with optional adapter cable APC100/200 or wireless with IR (APR300 in connection with ADS100/200 only) Power supply 2 x 1,5V AA mignon batteries External power supply via cable or wireless (APR300 in connection with ADS100/200 only) Recharge (APR300 in connection with ADS100/200 only) Protection IP 54 Temperature range 0 to 60C Measurements and weight LxWxH 175x90x36 mm, approx. 350 g 07.06.05 Vertraulich / Confidential Page 16 of 19 APR300/400 8. Safety and care The manufacturer accepts no liability for damage resulting from improper use or use not consistent with that described in these operating instructions. The APR Reader contains no parts that can be repaired by the user. For this reason the Reader Electronic may only be repaired by authorised customer service personnel. In both operation and storage of the reader please secure to comply with the environment conditions specified in the technical data. Clean the APR Reader only with a damp cloth. Use only water and any commercially available cleaning agent. Any modification to the APR Reader Electronic will render the warranty null and void. 07.06.05 Vertraulich / Confidential Page 17 of 19 APR300/400 9. Regulatory notices Regulatory notices for Europe:
Hereby, Agrident GmbH declares that this equipment - if used according to the instructions -
is in compliance with the essential requirements and other relevant provisions of the RTTE Directive 1999/5/ EC. Zulassungen fr Europa:
Hiermit erklrt die Agrident GmbH, dass sich diese Funkanlage bei bestimmungsgemer Verwendung in bereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der RTTE Richtlinie 1999/5/EG befindet.
A complete declaration of conformity can be requested at:
Eine vollstndige Konformittserklrung kann angefordert werden unter:
mail@agrident.com Regulatory notices for USA:
FCC digital device limitations Radio and television interference This equipment has been tested and found to comply with the limits for a digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 07.06.05 Vertraulich / Confidential Page 18 of 19 APR300/400 INDEX Acoustic signals...................................................................................................... 6 Animal ID ................................................................................................................. 9 Clear data............................................................................................................. 14 Clear list ............................................................................................................... 14 Clear memory....................................................................................................... 14 Communication .................................................................................................... 11 Data menu............................................................................................................ 13 Default.................................................................................................................. 13 Default setting ........................................................................................................ 15 Display ................................................................................................................. 11 Display format ...................................................................................................... 12 HOTKEY............................................................................................................... 10 Keyboard................................................................................................................ 6 Last ID.................................................................................................................... 9 Main menu.............................................................................................................. 9 Memory full........................................................................................................... 14 Memory space...................................................................................................... 13 No transponder....................................................................................................... 7 Online modus ....................................................................................................... 11 Operation menu...................................................................................................... 9 Operation within the menu...................................................................................... 9 Power manager .................................................................................................... 13 Power on ................................................................................................................ 7 Quick start .............................................................................................................. 7 Read....................................................................................................................... 7 RF/ID menu.......................................................................................................... 10 Save mode ............................................................................................................. 8 Save with AC.......................................................................................................... 8 Save with Action Code plus.................................................................................... 8 Save without AC..................................................................................................... 8 Send data to PC................................................................................................... 14 Send link list to PC ............................................................................................... 15 Setup menu.......................................................................................................... 10 Show Data............................................................................................................ 14 Software version................................................................................................... 13 Status messages.................................................................................................... 6 Tag List ................................................................................................................ 14 Tag List, USR....................................................................................................... 14 Technical data...................................................................................................... 16 Time and date ...................................................................................................... 13 Volume ................................................................................................................. 13 07.06.05 Vertraulich / Confidential Page 19 of 19
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-06-13 | 0.1342 ~ 0.1342 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2005-06-13
|
||||
1 | Applicant's complete, legal business name |
Deister Electronic GmbH
|
||||
1 | FCC Registration Number (FRN) |
0006742449
|
||||
1 | Physical Address |
Hermann-Bahlsen-Str. 11-13
|
||||
1 |
D-30890 Barsinghausen, N/A
|
|||||
1 |
Germany
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
b******@phoenix-testlab.de
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
IXL
|
||||
1 | Equipment Product Code |
APRBHI
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
S**** E****
|
||||
1 | Title |
Quality Manager
|
||||
1 | Telephone Number |
49-0-********
|
||||
1 | Fax Number |
49-0-********
|
||||
1 |
e******@deister-gmbh.de
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Inductive Reader | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Phoenix TestLab GmbH
|
||||
1 | Name |
H******** A******
|
||||
1 | Telephone Number |
49-52********
|
||||
1 | Fax Number |
49-52********
|
||||
1 |
o******@phoenix-testlab.de
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 0.13420000 | 0.13420000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC