FCC ID: IXLWCU2 Wireless Door Controller

7. Warning:

It is possible that external interference sources will influence the read range, e.g. monitors, switching power supplies, power cables parallel to data cables, mounting on metal etc. LCD monitors have a minimal influence on the read range. In particular the reader should be mounted on non-metallic material, such as plastic or wood. Metal screws (M6 - ISO 1207, 4762 or 7045) for mounting the reader have an insignificant influence on the read range. The unit needs to be operated with a power source with limited power consumption according to EN 62368-1:2016-05 annex Q.1. 7.1 Note:

With growing distance between reader and interference source, the influence decreases. Use only linear regulated power supplies. deister electronic GmbH offers suitable power supplies. To reduce the influence of external electrical inter-

ference, connect the cable shield to ground (GND) of the power supply. 7. Warnung:

Es ist mglich, das externe Strquellen die Lesereichweite beeintrchtigen. Dazu zhlen z.B. Monitore, Schaltnetzteile, Stromkabel, Datenkabel oder die Montage des Lesers direkt auf Metall. LCD-Monitore haben nur einen minimalen Einfluss auf die Lesereichweite. Im Normalfall sollte der Leser auf nicht-metallisches Ma-

terial wie Plastik oder Holz montiert werden. Metallschrauben (M6 - ISO 1207, 4762 oder 7045) fr die Montage des Lesers haben einen unbedeutenden Ein-

fluss auf die Lesereichweite. Das Gert ist mit einer Stromquelle mit begrenzter Leistung nach EN 62368-1:2016-05 Anhang Q.1 zu betreiben. 7.1 Hinweis:

Bei grer werdender Entfernung der Strquelle reduziert sich deren Einfluss auf den Leser. Benutzen Sie nur linear geregelte Netzteile. Die deister electronic GmbH bietet entsprechende Netzteile an. Um den Einfluss externer, elektrischer Strungen zu vermeiden, verbinden Sie den Masseanschluss (GND) mit der Er-

dungsklemme des Netzteils. 7. Attention:

Il est possible que certaines sources dinterfrences extrieures puissant influer sur la distance de lecture, ex.: moniteurs, mise en/hors service dalimentations lectriques, cbles dalimentations proximits des cbles de donnes, mon-

tage sur du mtal, etc. Les moniteurs LCD ont une influence minimale sur la distance de lecture.En particulier, le lecteur devra tre mont sur une surface non-mtalique, comme sur du plastique ou du bois. Les vis en mtal (M6 - ISO 1207, 4762 ou 7045) pour le montage du lecteur ont une influence insigni-

fiante sur la distance de lecture. Le systme doit tre aliment avec une alimen-

tation dont la puissance de consommation est limite conformment la norme EN 62368-1:2016-05 annexe Q.1. 7.1 Note:

En augmentant la distance entre le lecteur et la source dinterfrence, linfluence dcrot. Utiliser seulement des alimentations lectriques stabilises. deister elec-

tronic GmbH propose des alimentations appropries. Pour rduire linfluence dinterfrences lectriques externes, connecter lcran de protection du cble la masse (GND) de lalimentation lectrique. 8. Regulatory notices for Europe:

Hereby, deister electronic declares that the radio equipment type WCU 2 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of con-

formity is available at the following internet address: https://go.deister.com/ce 8. Zulassungen fr Europa Hiermit erklrt deister electronic, dass der Funkanlagentyp WCU 2 der Richtlinie 2014/53/EU entspricht. Der vollstndige Text der EU-Konformittserklrung ist unter der folgenden Internetadresse verfgbar: https://go.deister.com/ce 8. Avis Rglementation Europe:

Le soussign, deister electronic, dclare que lquipement radiolectrique du type WCU 2 est conforme la directive 2014/53/UE. Le texte complet de la dclaration UE de conformit est disponible ladresse internet suivante:

https://go.deister.com/ce WCU 2 Wiring & Installation Instructions Anschlu & Installationshinweise Instructions dInstallation et de Raccordement V221216

#896456 Deutsch English Francais 1. Dimensions / Abmessungen (mm) 9. FCC/IC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal-

lation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to a radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to a radio or television reception, which can be de-

termined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which

. the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Deister Electronics could void the user's authority to operate the equipment. This device contains licence-exempt transmitter(s)/receiver(s) that comply with In-

novation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference; including interference that may cause undesired operation of the device. Cet appareil contient un ou des metteurs/rcepteurs exempts de licence conformes aux RSS exempts de licence dInnovation, Sciences et Dveloppe-

ment conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes :

1. Cet appareil ne doit pas causer dinterfrences. 2. Cet appareil doit accepter toute interfrence ; y compris les interfrences pouvant entraner un fonctionnement indsirable de lappareil. Germany:deister electronic GmbH Hermann-Bahlsen-Str. 1130890 BarsinghausenTel.: +49 (0) 51 05 - 51 61 11Fax: +49 (0) 51 05 - 51 62 17info.de@deister.comGreat Britain:deister electronic (UK) Ltd. Stapleton Way, Enterprise Park Spalding, Lincolnshire PE11 3YQTel.: +44 (0) 1775 - 717100 Fax: +44 (0) 1775 - 717101info.uk@deister.comBenelux:deister electronic officeHendrik van Veldekesingel 150/56OffiCenter3500 Hasselt, BelgiumTel.: +32 (0) 15 - 48 02 15Fax: +32 (0) 15 - 48 02 16info.be@deister.comJapan:Deister Service Co., Ltd.Room 812, MG Meguro Ekimae Bld.2-15-19 Kamiosaki, Shinagawa-kuTokyo 141-0021, JapanTel.: +81 (0) 3 4540 1350Fax: +81 (0) 3 4540 1000info.jp@deister.comFrance:deister electronic France SARL15 avenue du QubecBtiment STERNES 291140 Villebon-sur-YvetteTel.: +33 (0) 1 47 - 35 78 78Fax: +33 (0) 1 47 - 35 92 59info.fr@deister.comAmericas and Caribbean:deister electronics USA, Inc.8576 Wellington Road Manassas, VA 20109 USATel.: +1 703 - 368 2739 Fax: +1 703 - 368 9791info.us@deister.com 2. Pinning / Pinbelegung / Raccordement 2.3 Locking Device Schlievorrichtung Dispositif de verrouillage ST 2 1 2 3 4 5 6 7 8 910 NO COM NC 2.4 Request to exit Trfreigabe Dverrouillage de la porte ST 2 1 2 3 4 5 6 7 8 910 2.1 RFID Reader / RFID Leser / Lecteur RFID IN GND ST 1 1 2 3 4 5 6 7 8 2.5 Anschluss Alarmanlage Alarm connection Connexion pour systme dalarme ST 2 1 2 3 4 5 6 7 8 910 VCC GND RS485/A RS485/B 2.2 Access Control System / Zutrittskontroll-

system / Systme de contrle daccs ST 1 1 2 3 4 5 6 7 8 NO COM NC 2.6 Door Contact Trkontakt Contact de porte ST 2 1 2 3 4 5 6 7 8 910 DC AC 12..24 VDC / max. 210 mA VCC GND RS485/A RS485/B IN GND www.deister.com 3. MAL 1 / MBL 1 Installation 6. Technical Data Insert drawing here. 4. Mounting / Montage Requires drawing with ATS 6-15 Tamperplate. Current drawing shows ATS 6-6. 88 x 88 x 31 mm PC IP54

-40...+60 C 5100 %, non-condensing 12...24 VDC / typ. 50mA, max. 210 mA Dimensions WxHxD:

Housing material:

Protection class:

Operating temperature:

Relative humidity:

Power requirement:

Transponder technologies: MIFARE DESFire, NFC Read Range:

Interface(s):

Inputs/Outputs:

Number of controllable doors:

Slot 1:

Slot 2:

1 BLE-Module (optional) airLink Up to 50 mm RS485 2 x digital inputs, 2 x relay outputs 30V / 2A 6. Technische Daten 88 x 88 x 31 mm PC IP54

-40...+60 C 5...100 %, nicht kondensierend 12...24 VDC / typ. 50mA, max. 210 mA Abmae BxHxT:

Gehusematerial:

Schutzart:

Betriebstemperatur:

Relative Luftfeuchtigkeit:

Energieversorgung:

Transpondertechnologien: MIFARE DESFire, NFC Lesereichweite:

Schnittstelle(n):

Ein-/Ausgnge:

Bis zu 50 mm RS485 2 x digitale Eingnge, 2 x Relaisausgnge 30V / 2A Step 1 / Schritt 1

(Tamper) Step 2 / Schritt 2

(WCU 2) Step 3 / Schritt 3

(Cover) 5. Warranty Note / Garantiehinweis / Remarque Garantie:

Bei nicht sachgemer Benutzung des Gertes erlischt die Garantie! Improper use of the device will void the warranty! Lutilisation incorrecte de lappareil annule la garantie!

Anzahl steuerbarer Tren: 1 Steckplatz 1:

Steckplatz 2:

BLE-Modul (optional) airLink 6. Donnes Techniques Dimensions LxHxP:

Matriau du botier:

Type de protection:

Temprature de fonctionnement:

Humidit relative:

Alimentation:

Technologies de transpondeur:

Distance de lecture:

Interface(s):

Entres/sorties:

Nombre de portes contrlables:

Emplacement 1:

Emplacement 2:

88 x 88 x 31 mm PC IP54

-40...+60 C 5...100 %, sans condensation 12...24 VDC / typ. 50mA, max. 210 mA MIFARE DESFire, NFC jusqu 50 mm RS485 2 x entres numriques, 2 x sorties de relais 30V / 2A 1 module BLE (en option) airLink PRELIMINARY

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6581539.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case

Manassas, VA 20110 9817 Godwin Drive #201 Deister Electronics USA, Inc. 30 April 2019 To Whom It May Concern:

We hereby delegate CKC Certification Services, LLC (CKC CS) power of attorney to act on our behalf in matters pertaining to certification of products. The actions of CKC CS shall be considered the same as our own. Sincerely, William L Nuffer President Deister Electronics USA, Inc. 9817 Godwin Drive #201 Manassas, VA 20110 1.703.368.2739 Direct Line: +1-703-659-9497 Direct FAX: +1-415-762-1963 Email: bill.nuffer@deister.com www.deister.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6581537.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Deister Electronics USA, Inc. 8576 Wellington Road Manassas, VA 20109 21 April 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Permanent Confidentiality To whom it may concern:

In accordance with 47CFR Section 0.457 and Section 0.459 pertaining to confidential material, we hereby request to hold permanently confidential all information contained within the below identified exhibits/document categories submitted pursuant to radio equipment certification requirements for FCC ID: IXLWCU2 1. Block Diagram 2. Operational Description 3. Schematics 4. Parts List The above material contains trade secrets and proprietary information as specified by 47CFR 0.457(d) and technical data, which would customarily be guarded from competitors. The public disclosure of this information might be harmful to our company and provide unjustified benefits to our competitors. Sincerely, William L Nuffer Director Technology Deister Electronics USA, Inc. 8576 Wellington Road Manassas, VA 20109 1.703.368.2739 Direct Line: +1-703-659-9497 Direct FAX: +1-415-762-1963 Email: bill.nuffer@deister.com www.deister.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6581534.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case CKC Certification Services, LLC CB: US0103; NB/AB: 0976 5046 Sierra Pines Drive Mariposa, CA 95338 Phone: 1 800-500-4EMC (4362) Fax: 209-787-5568 Email: tcbadmin@ckc.com Applicant Information Company Name:

Contact Name:

Contact Title:

Company Address:

Telephone No:

Facsimile No:

Email Address:

APP-FCC-A Applicant Attestation Deister Electronic GmbH Stefan Eichler Head of Research & Development Hermann-Bahlsen-Str. 11-13 D-30890 Barsinghausen Germany

+49.5105.516.111

+49.5105.516.217 Stefan.eicher@deister.com Certification Type / Equipment Identification Certification Program:

Certification Number:

FCC Equipment Authorization / Radio Certification IXLWCU2 The equipment identified above is / is not covered equipment prohibited from receiving an equipment authorization pursuant to 47 CFR Part 2, Subpart J, 2.903. The applicant identified above is / is not identified on the FCCs Covered List as an entity, affiliate, or subsidiary which produces equipment on the Covered List or identified as an entity which has rebranded or relabeled equipment produced by entities identified on the Covered List. I hereby attest and certify that the above statements are true and correct. Signature of Authorized Individual: 1 Printed Name:

Title of authorized signature:

Date William L Nuffer Director of Technology 5/26/2023 Note this attestation shall be signed by the applicant or their direct appointee within the same legal entity. A third party agent is not permitted to sign on behalf of the applicant. 1 Signature is not subject to the FCCs authorized individual policy (KDB 852134) and may be signed by any appropriate company official. APP-FCC-A Page 1 of 2 Rev 3 CKC Certification Services, LLC CB: US0103; NB/AB: 0976 5046 Sierra Pines Drive Mariposa, CA 95338 Phone: 1 800-500-4EMC (4362) Fax: 209-787-5568 Email: tcbadmin@ckc.com Attachment A Additional Information The FCCs Covered List includes certain telecommunications equipment and video surveillance equipment produced by specific manufacturers, their Affiliates or Subsidiaries and including any products produced by these entities which are rebranded or relabeled by other entities. (191, 184, 185, 188) 2 The FCC claims the identified equipment poses an unacceptable risk to United States national security. Telecommunications Equipment (195):

Any equipment used in fixed or mobile networks that provides advanced communications service, provided the equipment includes or uses electronic components, as defined under section 1.50001(c). Video Surveillance Equipment (205):

Any equipment that is used in fixed and mobile networks that provides advanced communications service in the form of a video surveillance service, provided the equipment includes or uses electronic components. Advanced Communications Service (195, 205) Any equipment that can be used in such a fixed or mobile broadband network to enable users to originate and receive high quality voice, data, graphics, and video telecommunications service using any technology with connection speeds of at least 200 kbps in either direction. Affiliate (183):

An entity that (directly or indirectly) owns or controls, is owned or controlled by, or is under common ownership or control with, another entity, where the term own means to have, possess, or otherwise control an equity interest (or the equivalent thereof) of more than 10 percent. Subsidiary (184):

Any entity in which such named entity directly or indirectly (1) holds de facto control or (2) owns or controls more than 50% of the total voting power of the entitys outstanding voting stock. Useful Links:

FCC Covered List https://www.fcc.gov/supplychain/coveredlist 47 CFR Part 2 Subpart J (including 2.903 and 2.911) https://www.ecfr.gov/current/title-47/chapter-I/subchapter-A/part-2/subpart-J FCC KDB System:

https://apps.fcc.gov/oetcf/kdb/index.cfm FCC Report and Order 22-84 https://docs.fcc.gov/public/attachments/FCC-22-84A1.pdf 2 Parenthetical references are citations of paragraph numbers in FCC Report and Order FCC 22-84 (ET Docket 21.232). APP-FCC-A Page 2 of 2 Rev 3

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6581535.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Attestation For United States Agent for Service of Process Applicant / Equipment Manufacturer Information Company Name:

Grantee Code:

FRN:

Deister Electronic GmbH IXLWCU2 0006742449 Applicant Attestation The undersigned applicant hereby consents:

a) b) c) to the designation of the herein named US Agent for Service of Process; and to accept responsibility and obligation to maintain a US Agent for Service of Process for no less than one year after either all marketing and importation of the applicable equipment within the U.S has been permanently terminated, or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later;

and to promptly update the US Agent for Service of Process information on file with the FCC in accordance with 47 CFR 2.929 in the event any change occurs in either the named entity or the named entitys contact information. Signature of Applicant:

Printed Name:

Date:

Stephan Eichler 4/26/2023 US Agent for Service of Process Information Company Name:

Contact Name:

Contact Title:

Physical Address:

Mailing Address:

Telephone No:

Facsimile No:

Email Address:

FRN1:

Deister Electronics USA, Inc. William Nuffer Director of Technology 8576 Wellington Road Manassas, VA 20109 USA Same as above

+1.703.368.2739

+1.703.368.9791 Bill.nuffer@deister.com N/A Agent for Service of Process Attestation The undersigned attests that the named party is a valid, legal US entity with a valid, legal US presence and as the delegated US Agent for Service of Process hereby consents:

a) b) to acknowledges and accepts responsibility to act as United States Agent for Service of Process on behalf of the applicant identified above; and to accept service of process in the US for matters related to the applicable equipment and at the physical address and email address identified herein on behalf of the applicant identified above for equipment authorization applications under certification pursuant to 47 CFR Part 2 Subpart J. Signature of US Agent:

Printed Name:

Date*:

*Expiration date is not permitted. William L Nuffer 4/26/2023 1 FRN is mandatory when the US Agent for Service of Process has an existing FRN. CKC CS PUB FCC AFSOP v3