FCC ID: 2AMVP-VCB601V2 2.4G Zigbee Module

VCB601-ZB01 User Manual EFR32MG1B232F256GM48 802.15.4 Zigbee Module FCC ID:2AMVP-VCB601V2 Rev. 1.0 2017/07/18 Notice:

1. Delta Networks (XIAMEN) LTD. reserves the right to change specifications detailed in this document at any time without notice, and assumes no responsibility for any errors within this document. 2. This document contains proprietary technical information in which is the property of the Delta Networks (XIAMEN) LTD. and shall not be disclosed to others in whole or in part, reproduced, copied, or used as the basis for design, manufacturing, or sale of apparatus without written permission of Delta Networks (XIAMEN) LTD. Inc. VCB601-ZB01 User Manual 1 Table of Content 1. PRODUCT OVERVIEW ............................................................................................................... 1 1.1. GENERAL DESCRIPTION .......................................................................................................... 3 1.2. FEATURES ....................................................................................................................................... 3 2. REVISION HISTORY ................................................................................................................... 4 VCB601-ZB01 User Manual 1. Product Overview 1.1. General Description The VCB601-ZB01 is a Zigbee data collector module which can collect data from other devices With TTL serial port and then send out data through Zigbee. This device is built in Silicon LAB EFR32MG1B232F256GM48 which is a highly integrated single-chip low power Wireless on Chip controller. The EFR32MG1B232F256GM48 combines an ARM-Cortex M4 with DSP instruction, MCU and 2.4G RF in a single chip. It provides UART interface. It also provides a bunch of configurable GPIOs which are configured as digital peripherals for different applications and controls. 1.2. Features IEEE802.15.4 in 2.4G Band compatible UART interface Dual 10-pins header connector Standard IEEE 802.15.4 Data Rate

<250kbps Modulation DSSS with OQPSK Operating Frequencies 2.400~2.483.5GHz Antenna Connector R-SMA connector VCB601-ZB01 User Manual 3 2. Revision History Revision 1.0 Date 07/18-2017 By Whom Yuanqiang.xu Initialize Remark VCB601-ZB01 User Manual 4 3. Statement Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &

your body. This device is intended only for OEM integrators under the following conditions:

1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. 5 VCB601-ZB01 User Manual End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: 2AMVP-VCB601V2. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warnin VCB601-ZB01 User Manual 6

VCB601-ZB01 SN:VC601001 xxxxxxxx MAC :xxX:XX:XX:XX:XX:XX FCC ID:2AMVP-VCB601V2 H/W: x.x F/W: X.xXxx Made in China os 06 00lo1 oz NUTT ja 6 08 OZ 09 0 fee So wo i=}

Nn So Oz OF NOL O06 08 OZ 09 OS OF OF OZ O Foun usvstavisinalicesTuagstanedives tussle und i TBE

DELTA NETWORKS (XIAMEN) LTD. Date: 2021-05-11 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: DELTA NETWORKS (XIAMEN) LTD.. FCC ID: 2AMVP-VCB601V2 FCC Part 15C Certification Confidentiality Request File Name Block Diagram.pdf Schematic.pdf Operational description.pdf BOM.pdf Gentlemen:

This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. DELTA NETWORKS (XIAMEN) LTD. requests that the following documents regarding this submission for FCC ID: 2AMVP-VCB601V2 be kept confidential:

Exhibit Type Block Diagram Schematics Operational Description Part list Those documents contain detailed system and equipment description and related information about the product which DELTA NETWORKS (XIAMEN) LTD., considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, DELTA NETWORKS (XIAMEN) LTD. considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Yours Sincerely, DELTA NETWORKS (XIAMEN) LTD.

DELTA NETWORKS (XIAMEN) LTD. Modular Approval Request Letter Date:

FCC ID:

2021-03-29 2AMVP-VCB601V2 Type of Equipment: 2.4GZigbeeModule The following requirements according to FCC Part 15.212 are met:

i RF shielding The radio portion has his own shielding (see external photos). ii Buffered modulation/data inputs has been integrated in the chipset iii Power supply regulation is integrated iv Antenna requirements section 15.203, 15.204 b and 15.204 c The module comes with one permanently attached antennas. The spurious emission requirements are fulfilled (see attached test report). v Stand alone test configuration Please referring to test set up configuration photo vi Labelling The module has its own label. The instruction for labelling rules for the host device has been stated in the users manual vii Compliance on specific rule or operating requirements The required FCC rules has been fulfilled and all instructions for maintaining compliance has been clearly stated in the users manual viii RF Exposure RF exposure requirements are fulfilled for mobile configuration. The installation of the module is restricted to mobile host devices what is clearly stated in the installation instruction of the user manual. For portable applications OEM integrators need SAR evaluation and an own FCC ID. Name: Todd Chen Title: Project Manager Company: DELTA NETWORKS (XIAMEN) LTD. version01

DELTA NETWORKS (XIAMEN) LTD. Date: 2021-05-11 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The DELTA NETWORKS (XIAMEN) LTD. the undersigned, hereby authorizes Mrs. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the DELTA NETWORKS (XIAMEN) LTD. solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AMVP-VCB601V2 including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the DELTA NETWORKS (XIAMEN) LTD. in connection with the Application shall have the same effect as acts of the DELTA NETWORKS (XIAMEN) LTD.. DELTA NETWORKS (XIAMEN) LTD. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, DELTA NETWORKS (XIAMEN) LTD.