FCC ID: HYQDNMWR015 Millimeter Wave Radar Sensor

Manual Requirement of FCC / ISED Model: DNMWR015 Our product is one of vehicle parts incorporated into the vehicle as original equipment. Therefore, we will not supply the user manual and service manual of the product. However, we will ask the vehicle manufacturer to include following statements in the vehicle users manual and service manual in accordance with FCC and ISED requirements. 1. Requirement for User manual of the vehicle 1.1. FCC Requirement In accordance with 15.21 of FCC rule, following statement will be included in the user manual of the vehicle. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. In accordance with requirement of FCC15.19(a)(3), following statement will be included in the user manual of the vehicle. NOTE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. In accordance with requirement of FCC RF exposure, following statement will be included in the user manual of the vehicle. Radiofrequency radiation exposure Information:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator (antenna) and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Manual Requirement of FCC / ISED Model: DNMWR015 1.2. ISED Requirement In accordance with requirement of RSS-GEN, following statement will be included in the user manual of the vehicle. NOTE This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. In accordance with requirement of RSS-102 of the ISED radio frequency Exposure rules, following statement will be included in the user manual of the vehicle. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from persons body. 2. Service manual In accordance with SAR requirement of FCC rule, following statement will be included in the service manual. Radiofrequency radiation exposure Information:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be kept with minimum distance of 20 cm between the radiator (antenna) and your body at all times during adjustment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Product:

Millimeter Wave Radar Sensor Model:

DNMWR015 Marking location:

(1.5) Note:

Marking layout, size and other indications may be changed Labeling Information

- Label material: PET-01

- Method of labeling: Sticking on the product Labels is affixed with an adhesive, and durability tests have confirmed that the label will not peel off within the product life. Scale: mm

Letter of Authorization Date:

11/08/2022 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC IC:

Applicant:

HYQDNMWR015 DENSO CORPORATION To whom it may concern:

We, the undersigned, hereby authorize Rie Fujiwara of Consumer Technology Division, UL Japan, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Japan, Inc. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. The application for the subject equipment has not been submitted to another TCB for certification. Sincerely, Keijiro Kumagai Manager Engineering Development Promotion Div. DENSO CORPORATION

Request for Confidentiality Date:

11/08/2022 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC IC:

Applicant:

HYQDNMWR015 DENSO CORPORATION Please be advised that the following information is to be held confidential on behalf of DENSO CORPORATION, referring to the FCC rules 0.457 and 0.459:

Schematic Diagram Block Diagram Theory of Operation Parts List The application contains technical information which DENSO CORPORATION deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Sincerely, Keijiro Kumagai Manager Engineering Development Promotion Div. DENSO CORPORATION

Request for Short-Term Confidentiality Date:

11/08/2022 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC IC:

Applicant:

HYQDNMWR015 DENSO CORPORATION Please be advised that the following information is to be held in confidence for 180 days from the date of the Grant of Equipment Authorization and behalf of us, referring to the FCC rules 0.457 and 0.459:

External Photos Internal Photos Test Setup Photos User Manual The application contains technical information which DENSO CORPORATION deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Sincerely, Keijiro Kumagai Manager Engineering Development Promotion Div. DENSO CORPORATION