FCC ID: CQOEG08220 DL3 RSPA IBU

DENSO KOREA CORPORATION OCT, 10, 2019 1. Description of manufacturer 1.1 Trade mark

: DNKR 1.2 Name and address of manufacturer

: DENSO KOREA CORPORATION

: Cheomdan Industry 3, Masanhappo-gu, Changwon-si, Gyungsangnam-do, Korea 1.3 Name and address of applicant

: DENSO KOREA CORPORATION

: Cheomdan Industry 3, Masanhappo-gu, Changwon-si, Gyungsangnam-do, Korea

-Name

-Address

-Name

-Address 2. Technical description of the system 2.1 Type number

-Smart Key ECU

: EG08220

- Nominal Power supply voltage

: 12VDC 2.2 Specifications Receiver(RF)

-Nominal frequency

: 433.92MHz

-Oscillator frequency

: 21.948717MHz (Crystal)

-Type of modulation

: FSK(F1D)

-Type of receiving system

: Super-heterodyne

-Antenna

: RF ANT : Internal antenna Transmitter(LF)

-Nominal frequency

: 125kHz

-Oscillator frequency

: 4.026 MHz (Crystal)

-Type of modulation

-Antenna

: OOK(A1D)

: LF ANT1: External antenna (inside Cabin) LF ANT2: External antenna (inside Cabin) LF ANT3: External antenna (inside Trunk) LF ANT4: External antenna (inside Bumper) LF ANT5: External antenna (inside Bumper) LF ANT6: External antenna (Built in Door HDL) LF ANT7: External antenna (Built in Door HDL) Transponder

-Nominal frequency

: 125kHz

-Oscillator frequency

: 4.00MHz (Resonator)

-Type of modulation

: OOK(A1D)

-Antenna

: TP ANT: External antenna (Built in SSB) 3.Outline of the system Existing BCM, SMK, TPMS receiver integrated ECU as well as smart key function. Body and TPMS related control unit (integrated PDM, RF Receiver). It controls the power operation mode (ACC, IGN1, IGN2, START) of the vehicle according to the operation of the START / STOP button when the card key / FOB is successfully authenticated. Various Lamp, Indicator, Rear Curtain, Side mirror, Relay control related to BCM function Directly and indirectly, and performs a warning and display function for processing data received from the TPS sensor. 3.1. IBU RSPA Smart Key System The smart key unit controls the smart key system. When the user inputs the door handle or the start button, the smart key unit transmits the LF signal (125KHz) to the smart key FOB and receives the signal (433 MHz) from the FOB to perform a related function . Terminal control function: Control terminal (IGN1, IGN2, ACC) power when inputting start / stop button Immobilizer function: Function for emergency start or RKE key authentication when discharging FOB battery Start stop button LED lighting control Electrical steering colume lock (ESCL) control function - excluding domestic / North American / Canadian specifications BCM function System BCM function is a function for user convenience / warning, and it can directly or indirectly control various through communication or switch input. It also performs Immobilizer function. indicators, sensor power, hot wire and relay control Terminal control function: IGN1, IGN2, ACC power control Immobilizer function: Perform function for RKE Key authentication Head lamp washer relay control function - Optional function Indicator control function Auto light control function Puddle & Pocket Lamp control function Solenoid control function (ATM) PAS power control function LIN communication Chassis CAN communication (500kbps) Body CAN communicaton (500kbps) 3.2. LF Antennas:

Inductive antennas in and at the vehicle are used to transform the current, driven by the SMK antenna driver, into a magnetic field (125 kHz), which is the carrier for the SMK challenge. Two antenna covers the vehicles interior. One antenna covers the interior of the Trunk. Two antennas in the Door Handles (Left side and Right side) cover the area around the doors. One antenna in the rear bumper covers the area around the trunk for access to the trunk. Those antennas are based on ferrite core and have a pair of twisted copper cables from antenna to pin header. 3.3. Transponder Antenna:

Built in the Start Stop Button to communicate with the transponder by a base station and using wireless communication :(125 kHz) 3.4 Installation in vehicle The Smart Key ECU is installed inside the vehicle. Smart Key FOB RF ANT LF ANT TP ANT RF Receiver LF ANT Driver Transponder Driver IBU(SMK ) Installation in vehicle Fig. Outline of the System Smart Key FOB Door Handle with LF Antenna Start Stop Button with Transponder Antenna LF Antenna SMK+BCM With RF Internal Antenna RF Receiver and LF Driver Fig. Installation of the System FCC Part 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. FCC and IC RF Radiation Exposure Statement: This equipment complies with FCC and IC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RF du FCC et IC d'exposition aux radiations: Cet quipement est conforme l'exposition de FCC et IC rayonnements RF limites -tablies pour un environnement non contrl. Lantenne pour ce transmetteur ne doit pas tre mme endroit avec dautres metteur sauf conformment FCC et IC procdures de produits Multi-metteur.

Label Format and Location Model : EG08220 FCC ID : CQOEG08220 IC : 1551E-EG08220 Model : EG08220 FCC ID : CQOEG08220 IC : 1551E-EG05820 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

<Top View of EUT>

DENSO Korea Corporation 3, Cheomdansaneop-ro, Masanhappo-gu, Chang-won-si, Gyeongsangnam-do, Korea 3 January 2020 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad, Columbia,MD21046 LETTERFORAUTHORIZATION FCC ID: CQOEG08220 Towhomitmayconcern:

I,theundersigned,herebyauthorizeLabManagerHyunchae, You (or Jungmin, Yang) andof SGSKoreaCo.,Ltd.andhereafterreferredtoasSGSKorea,toactonourbehalfinallmanners relatingtoapplicationforequipmentauthorization,includingsigningofalldocumentsrelating tothesematters.AnyandallactscarriedoutbyLabManagerHyunchae, You(orJungmin, Yang)of SGSKoreaCo.,Ltd.onourbehalfshallhavethesameeffectasactsofourown. I,theundersigned,herebycertifythatwearenotsubjecttoadenialoffederalbenefits,that includesFCCbenefits,pursuanttoSection5301oftheAntiDrugAbuseActof1988,21U.S.C. 853(a). InauthorizingSGSKoreaasouragent,westillrecognizethatweareresponsibleto:

a) complywiththerelevantprovisionsofthecertificationprogram;

b) makeallnecessaryarrangementsfortheconductoftheevaluation,includingprovision forexaminingdocumentationandaccesstoallareas,records(includinginternalaudit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment,surveillance,reassessment)andresolutionofcomplaints;

c) makeclaimsregardingcertificationonlyinrespectofthescopeforwhichcertification hasbeengranted;

d) do not use our product certification in such a manner as to bring the Certification Divisionintodisreputeandnotmakeanystatementregardingourproductcertification whichtheCertificationDivisionmayconsidermisleadingorunauthorized;

e) upon suspension or cancellation of certification, discontinue use of all advertising matterthatcontainsanyreferencetheretoandreturnanycertificationdocumentsas requiredbytheCertificationDivision;

f) usecertificationonlytoindicatetheproductsarecertifiedasbeinginconformitywith specifiedstandards;

g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleadingmanner;

h) ensurethatanyreferencetoourproductcertificationincommunicationmediasuchas documents, brochures or advertising, complies with the requirements of the CertificationDivision;

DENSO Korea Corporation 3, Cheomdansaneop-ro, Masanhappo-gu, Chang-won-si, Gyeongsangnam-do, Korea i) j) keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records availabletotheCertificationDivisionwhenrequested;

takeappropriateactionwithrespecttosuchcomplaintsandanydeficienciesfoundin productsorservicesthataffectcompliancewiththerequirementsforcertification;

k) documenttheactionstaken. Thisauthorizationisvaliduntilfurtherwrittennoticefromtheapplicant. SincerelyYours Senior Research Engineer DENSO Korea Corporation 82-55-220-9321 hcs1203@densokorea.com

DENSO Korea Corporation 3, Cheomdansaneop-ro, Masanhappo-gu, Chang-won-si, Gyeongsangnam-do, Korea 3 January 2020 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad, Columbia,MD21046 REQUESTFORCONFIDENTIALITY FCCID:CQOEG08220 ToWhomItMayConcern:

PursuanttoSections0.457and0.459oftheCommissionsRules(CFR47),andSection552(b)(4) of the Freedom of Information Act, DENSO KOREA ELECTRONICS hereby requests confidentiality and treatment of certain information accompanying this application. Thematerials contain trade secrets and proprietary information not customarily released to the public.ThepublicdisclosureofthesemattersmightbeharmfultotheApplicantand provideunjustifiedbenefitstoitscompetitors. WearealsoherebyrequestShortTermConfidentialityfor180daysafterthegrantasoutlined in Public Notice DA 041705. This provision will give Samsung Electronics Co., Ltd temporary confidentiality of commercially sensitive information prior to product release. The requested PermanentandTemporaryConfidentialexhibitsarelistedasfollows:

Permanent BlockDiagram CONFIDENTIALLIST 1 2 OperationalDescriptions 3 4 5 6 7 UserManual Schematics ExternalPhotos InternalPhotos TestSetupPhotos ShortTerm TheApplicantunderstandsthatpursuanttoRule0.457,disclosureofthisapplicationandall accompanyingdocumentations,whereapplicable,willnotbemadepublicbeforethedateof theGrantforthisapplication. SincerelyYours, Senior Research Engineer DENSO Korea Corporation 82-55-220-9321 hcs1203@densokorea.com