|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5
|
Effective |
2024-12-12
|
|
1 2 3 4 5
|
2024-08-14
|
|
1 2 3 4 5
|
Applicant's complete, legal business name |
Dental Imaging Technologies Corporation
|
|
1 2 3 4 5
|
FCC Registration Number (FRN) |
0032547317
|
|
1 2 3 4 5
|
Physical Address |
450 Commerce Drive
|
|
1 2 3 4 5
|
Quakertown, Pennsylvania 18951
|
|
1 2 3 4 5
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5
|
TCB Application Email Address |
h******@acbcert.com
|
|
1 2 3 4 5
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
1 2 3 4 5
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5
|
Grantee Code |
2A7FY
|
|
1 2 3 4 5
|
Equipment Product Code |
WNFB265AXIBT
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5
|
Name |
S****** Q******
|
|
1 2 3 4 5
|
Title |
Project Manager
|
|
1 2 3 4 5
|
Telephone Number |
+86 1********
|
|
1 2 3 4 5
|
Fax Number |
88888********
|
|
1 2 3 4 5
|
E-mail |
d******@envistaco.cn
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4 5
|
Firm Name |
Intertek Testing Services (Shanghai FTZ) Co., Ltd.
|
|
1 2 3 4 5
|
Intertek Testing Services Shanghai
|
|
1 2 3 4 5
|
Name |
E**** L******
|
|
1 2 3 4 5
|
Physical Address |
Building No.86, 1198 Qinzhou Road(North)
|
|
1 2 3 4 5
|
Building N0.86,1198 Qinzhou Road(North)
|
|
1 2 3 4 5
|
Shanghai, 200233
|
|
1 2 3 4 5
|
China
|
|
1 2 3 4 5
|
Telephone Number |
02161********
|
|
1 2 3 4 5
|
+86-2********
|
|
1 2 3 4 5
|
+8621********
|
|
1 2 3 4 5
|
E-mail |
E******@intertek.com
|
|
1 2 3 4 5
|
E******@intertek.com
|
|
|
app
s
|
Non Technical Contact
|
|
1 2 3 4 5
|
Firm Name |
Intertek Testing Services Shanghai
|
|
1 2 3 4 5
|
Name |
E**** L******
|
|
1 2 3 4 5
|
Physical Address |
Building N0.86,1198 Qinzhou Road(North)
|
|
1 2 3 4 5
|
Shanghai, 200233
|
|
1 2 3 4 5
|
China
|
|
1 2 3 4 5
|
Telephone Number |
+8621********
|
|
1 2 3 4 5
|
E-mail |
E******@intertek.com
|
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 3 4 5 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 | JBP - Part 15 Class B Computing Device Peripheral |
| 1 2 3 4 5 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 | DTS - Digital Transmission System |
| 1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WNFB-265AXI(BT) |
| 1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 5 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 4 5 | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFB265AXIBT Grant Date: 02/24/2021 |
| 1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
| 1 2 3 4 5 | Yes |
| 1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 | Grant Comments | Listed output power is peak conducted. This device has 80 MHz bandwidth mode. Single Modular Approval.
Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide 0cm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values is: Body-worn 1.32 W/kg. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use for continuing compliance of the module as described in KDB 996369 D03, including but not limited to the labeling of the host product, providing instructions to end users of the host system related to RF exposure compliance and minimum antenna-to-end user separation distances, the antenna type, and the maximum antenna gain. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369 D04. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.
This is a C2PC application as documented in this filing |
| 1 2 3 4 5 | This is a composite device that is being approved as a certified transmitter module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369 D04. |
| 1 2 3 4 5 | Listed output power is peak conducted. Single Modular Approval The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use for continuing compliance of the module as described in KDB 996369 D03, including but not limited to the labeling of the host product, providing instructions to end users of the host system related to RF exposure compliance and minimum antenna-to-end user separation distances, the antenna type, and the maximum antenna gain. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369 D04. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| 1 2 3 4 5 | Listed output power is peak conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes. Single Modular Approval.
The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use for continuing compliance of the module as described in KDB 996369 D03, including but not limited to the labeling of the host product, providing instructions to end users of the host system related to RF exposure compliance and minimum antenna-to-end user separation distances, the antenna type, and the maximum antenna gain. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369 D04. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| 1 2 3 4 5 | Listed output power is peak conducted. This device has 20 MHz bandwidth mode. Single Modular Approval.
The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use for continuing compliance of the module as described in KDB 996369 D03, including but not limited to the labeling of the host product, providing instructions to end users of the host system related to RF exposure compliance and minimum antenna-to-end user separation distances, the antenna type, and the maximum antenna gain. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369 D04. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| 1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5
|
Firm Name |
Underwriters Laboratories Taiwan Co., Ltd.
|
|
1 2 3 4 5
|
Name |
R******** C******
|
|
1 2 3 4 5
|
Telephone Number |
+886-********
|
|
1 2 3 4 5
|
Fax Number |
+886-********
|
|
1 2 3 4 5
|
E-mail |
R******@ul.com
|
|