FCC ID: 2AN9V-DVTRF001 WCBN3507A-D6

DEVIALET PRODUCT SPECIFICATION Wi-Fi (11ac/b/g/n 2Tx2R) + BT (V4.1 LE) M.2 Type 1216 LGA Module DVTRF001 WCBN3507A-D6 DEVIALET Model name: DVTRF001 QCA NFA324A-50

* This document contains confidential proprietary information and is property of LTC. The contents of the document should not be disclosed to unauthorized persons without the written consent of LTC. Page 1/17 CONTENT PRODUCT FEATURES .................................................................................................................... 3 BT FEATURES: ....................................................................................................................................... 3 WI-FI FEATURES: ................................................................................................................................... 3 COMMON FEATURES: ............................................................................................................................. 3 PRODUCT SPECIFICATIONS ........................................................................................................ 4 MAIN CHIPSET ....................................................................................................................................... 4 FUNCTIONAL SPECIFICATIONS ............................................................................................................... 4 FEDERAL COMMUNCATION COMMISSION INTERFERENCE STATEMENT ................. 7 INDUSTRY CANADA STATEMENT: ............................................................................................ 9

..................................................................................................... 13 INTRODUCTION AND USAGE .................................................................................................... 14 Page 2/17 PRODUCT FEATURES BT FEATURES:

Bluetooth V4.1, V4.0 LE, V3.0+HS, Bluetooth V2.1+EDR system, backward compatible with BT version of 1.1, 1.2 and 2.0 Supports Class 1 (TX power maximum to +10dBm) BT transmission speed including 1M, 2M and 3Mbps EDR operations Supports for Simple Pairing (SP) and Enhanced Inquiry Response (EIR) function HCI USB interface to work with Windows upper layer stack WI-FI FEATURES:

Operates at ISM frequency Band(2.4/ 5 GHz) IEEE Standards Supports 802.11ac, 802.11a, 802.11b, 802.11g and 802.11n Wi-Fi using Low power PCIe (w/ L1 sub-state) interface Enterprise level security supporting:

HW : 64/128-bit WEP, CKIP, TKIP and AES-CCMP encryption SW : WPA, WPA2, IEEE 802.1x, FIPS140-2 Support 2 transmission and 2 receiving, transmission rate can up to 867Mbps

(Physical Rate) in downstream and upstream Additional features include maximal likelihood (ML) decoding, low-density parity check(LDPC), maximum ratio combining(MRC),Rx space time block code(STBC), MU-MIMO and transmit beam forming COMMON FEATURES:

Form Factor: M.2(NGFF) LGA Type 1216 Supports for BT & WLAN Co-existence RoHS compliance Halogen Free compliance Page 3/17 PRODUCT SPECIFICATIONS MAIN CHIPSET Qualcomm QCA6174A-50 FUNCTIONAL SPECIFICATIONS BT Function Standard Bluetooth V4.1 LE, V4.0LE, V3.0+HS, V2.1+EDR Bus Interface USB 1.1 Data Rate 1 Mbps, 2Mbps and 3Mbps Modulation Scheme LE, GFSK, /4-DQPSK and 8-DPSK Frequency Range 2.402~2.480 GHz Transmit Output Power 0dBmOutput Power +10dBm ; Class 1 Device Receive Sensitivity

< 0.1% BER at -70dBm Software Bluetooth Suite Wi-Fi Function Standard IEEE802.11ac, IEEE802.11a , IEEE802.11b , IEEE 802.11g , IEEE 802.11n Bus Interface Low power PCI Express 802.11a:

54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11b:

11, 5.5, 2, 1 Mbps 802.11g:

54, 48, 36, 24, 18, 12, 9, 6 Mbps Data Rate 802.11n:

MCS 0 to 15 for HT20MHz MCS 0 to 15 for HT40MHz 802.11ac:

MCS 0 to 8 for HT20MHz MCS 0 to 9 for HT40MHz MCS 0 to 9 for HT80MHz Media Access Control CSMA/CA with ACK 802.11ac:

256QAM, 64QAM, 16QAM, QPSK, BPSK 802.11a:

64QAM, 16QAM, QPSK, BPSK Modulation Techniques 802.11b:

CCK, DQPSK, DBPSK 802.11g:

64QAM, 16QAM, QPSK, BPSK 802.11n:

Page 4/17 Transmit Output Power 2x2

(Tolerance:

1.5dBm@2.4GHz 2dBm@5GHz) 64QAM, 16QAM, QPSK, BPSK 802.11b / CCK :

18 dBm 802.11a :

13 dBM @6,24,36Mbps 12 dBM @48Mbps 10.5 dBM @54Mbps 802.11g / OFDM:

18 dBm@6,9,12,18,24Mbps 17 dBm@36Mbps 16 dBm@48Mbps 15 dBm@54Mbps 2.4G:

802.11n / HT20:

18 dBm@MCS0 15 dBm@MCS7 802.11n / HT40:

17 dBm@MCS0 15 dBm@MCS7 5G:

802.11n / HT20:

12.5 dBm@MCS0 10 dBm@MCS7 802.11n / HT40:

11.5 dBm@MCS0 10 dBm@MCS7 AC:

HT20:

10 dBm@MCS7 9 dBm@MCS8 HT40:

8 dBm@MCS8 7 dBm@MCS9 HT80:

7 dBm@MCS8 6 dBm@MCS9 802.11b:

Less than IEEE Standard -76dBm 802.11g / 802.11a:

Less than IEEE Standard -82dBm @ 6Mpbs Less than IEEE Standard -65dBm @54Mbps 802.11n:

HT20:

Receiver Sensitivity Less than IEEE Standard -82dBm @ MCS0 Less than IEEE Standard -64dBm @ MCS7 HT40:

Less than IEEE Standard -79dBm @ MCS0 Less than IEEE Standard -61dBm @ MCS7 802.11ac:

HT80:

Less than IEEE Standard -51dBm @ MCS9 HW : 64/128-bit WEP, CKIP, TKIP and AES-CCMP encryption SW : WPA, WPA2, IEEE 802.1x, FIPS140-2 Security Common Function Operating Voltage 3.3 V 9% I/O supply voltage Page 5/17 OS Supported Google Chrome & Microsoft Windows Power Consumption

(In Average) TX Mode:

610mA Maximum power current(bi-direction):

750mA RX Mode:

285mA Associated Idle:

54mA Unassociated Idle:

8mA Radio Off(w/ L1SS enable):

2.4mA Antenna Type RF on PADs Page 6/17 FEDERAL COMMUNCATION COMMISSION INTERFERENCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions:

1) The antenna must be installed such that 20 cm is maintained between the Page 7/17 antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID: 2AN9V-DVTRF001. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Page 8/17 INDUSTRY CANADA STATEMENT:

This device complies with ISEDs licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d ISED applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Dclaration d'exposition aux radiations:

Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada tablies pour un environnement non contrl. Le produit est sr pour un fonctionnement tel que dcrit dans ce manuel. La rduction aux expositions RF peut tre augmente si l'appareil peut tre conserv aussi loin que possible du corps de l'utilisateur ou que le dispositif est rgl sur la puissance de sortie la plus faible si une telle fonction est disponible. Radiation Exposure Statement:

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:

Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est respecte entre l'antenne et les utilisateurs, et 2) Le module metteur peut ne pas tre complant Page 9/17 avec un autre metteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. IMPORTANT NOTE:

In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:

Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed This transmitter module is authorized only for use in device where the antenna may be such that 20 cm may be maintained between the antenna and users. The final end product must installed such that 20 cm may be maintained between the antenna and users. The final be labeled in a visible area with the following: Contains IC: 23355-DVTRF001. end product must be labeled in a visible area with the following: Contains IC: 23355-

DVTRF001. Plaque signaltique du produit final Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o l'antenne peut tre installe de telle sorte qu'une distance de 20cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante: "Contient des IC: 23355- DVTRF001". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires Page 10/17 requises et avertissements comme indiqu dans ce manuel. Caution :

(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;

(iii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and

(iv) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated.

(v) Users should also be advised that high-power radars are allocated as primary users

(i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:

Le guide dutilisation des dispositifs pour rseaux locaux doit inclure des instructions prcises sur les restrictions susmentionnes, notamment :

(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

(ii) le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5250 5 350 MHz et de 5470 5725 MHz doit tre conforme la limite de la p.i.r.e;

(iii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 725 5 850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie pour l'exploitation point point et lexploitation non point point, selon le cas;

(iv) les pires angles dinclinaison ncessaires pour rester conforme lexigence de la p.i.r.e. applicable au masque dlvation, et nonce la section 6.2.2 3), doivent tre clairement indiqus.

(v) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Page 11/17 DETACHABLE ANTENNA USAGE This radio transmitter (IC: 23355- DVTRF001 / Model: DVTRF001) has been approved by ISED to operate with the antenna type listed below with maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (IC: 23355- DVTRF001 / Model: DVTRF001) a t approuv par ISED pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Approved antenna(s) list Page 12/17 1. 2. 1. 2. XXXyyyLPDzzzz-x Page 13/17 INTRODUCTION AND USAGE The DVTRF001 is a device that allows you connect your computer to a wireless local area network (LAN). A wireless LAN allows your system to use wireless Radio Frequency (RF) technology to transmit and receive data without physically attaching to the network. The Wireless protocols that come with this product ensure data security and isolation from interference generated by other radio frequencies. This card also allows you to take full advantage of your computers mobility with access to real-time information and online services anytime and anywhere. In addition, this device eliminates the bother of pulling cable through walls and under furniture. It even allows you to place your system in locations where cabling is impossible. Modifying and augmenting networks has never been so easy. Wireless Network Options The Peer-to-Peer Network This network installation lets you set a small wireless workgroup easily and quickly. Equipped with wireless PC Cards or wireless PCI, you can share files and printers between each PC and laptop. You can also use one computer as an Internet Server to connect to a wired global network and share files and information with other computers via a wireless LAN. Page 14/17 The Access Point Network The network installation allows you to share files, printers, and Internet access much more convenient. With Wireless LAN Cards, you can connect wireless LAN to a wired global network via an Access Point. NETWORK CONNECTION Once the device driver is well installed, a network setting described in the following should be also established. 1.Click the Wireless icon to enable Windows Zero Configure. 2.Select the AP then click the Connect Page 15/17 Page 16/17 3.Surfing the Internet after completing connection. Page 17/17

Report No.: 140808E04X Page 3 Reference No.: 171031D16 Report No.: 140808E04X Page 4 Reference No.: 171031D16 Report No.: 140808E04X Page 6 Reference No.: 171031D16

CONSTRUCTION PHOTOS OF EUT Report No.: 140808E04X Page 1 Reference No.: 171031D16 Report No.: 140808E04X Page 2 Reference No.: 171031D16 Report No.: 140808E04X Page 5 Reference No.: 171031D16 Antenna set 1 Report No.: 140808E04X Page 7 Reference No.: 171031D16 Report No.: 140808E04X Page 8 Reference No.: 171031D16 Report No.: 140808E04X Page 9 Reference No.: 171031D16 Report No.: 140808E04X Page 10 Reference No.: 171031D16 Antenna set 2 Report No.: 140808E04X Page 11 Reference No.: 171031D16 Report No.: 140808E04X Page 12 Reference No.: 171031D16 Antenna set 3 Report No.: 140808E04X Page 13 Reference No.: 171031D16 Report No.: 140808E04X Page 14 Reference No.: 171031D16 Report No.: 140808E04X Page 15 Reference No.: 171031D16 Antenna set 4 Not ues for this test Antenna Report No.: 140808E04X Page 16 Reference No.: 171031D16 Report No.: 140808E04X Page 17 Reference No.: 171031D16 Report No.: 140808E04X Page 18 Reference No.: 171031D16

CONSTRUCTION PHOTOS OF EUT Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 1 / 19 Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 2 / 19 Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 3 / 19 Antenna set 1 Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 4 / 19 Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 5 / 19 Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 6 / 19 Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 7 / 19 Antenna set 2 Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 8 / 19 Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 9 / 19 Antenna set 3 Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 10 / 19 Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 11 / 19 Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 12 / 19 Antenna set 4 Not ues for this test Antenna Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 13 / 19 Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 14 / 19 Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 15 / 19 Antenna set 5 (Model: DVT-BA-M-1311-P) Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 16 / 19 Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 17 / 19 Antenna set 5 (Model: DVT-BA-PF-1408-P) Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 18 / 19 Reference No.: 190621E01-2 Report No.: 140808E04X (original) Page No. 19 / 19

4xR1mm 10.5mm 4xR1mm 10.5mm 4xR1mm FCC ID:2AN9V-DVTRF001 IC: 23355-DVTRF001 10.5mm FCC ID:2AN9V-DVTRF001 IC: 23355-DVTRF001 m m 0 1 m m 5

. 7 R E V V 0 0

:

M o d e M a d e i n C h n a i l

:

D V T R F 0 0 1

=

m m 0 1 m m 5

. 7 R E V V 0 0

:

M o d e M a d e i n C h n a i l

:

D V T R F 0 0 1

+

m m 0 1 m m 5

. 7 XXXXXXXXXXXX XXXXXXXXXXXX 1:1 MAC IDECC 200,4*4mm XXXXXXXXXXXX(

BD= MAC +1 m m 0 1 m m 5

. 7 WI-CQES-002 4xR1mm 10.5mm FCC ID:2AN9V-DVTRF001 IC: 23355-DVTRF001 R E V V 0 0

:

M o d e M a d e i n C h n a i l

:

D V T R F 0 0 1 XXXXXXXXXXXX 3:1 50912013343D Devialet

(label):

():

():NO M-8511

():

lackB

():

(): 10.5*10mm

():+-0.3mm WCBN3507A-D6 MAC ID label MM11318420D 1 Marcel Chen Bing Li Rita Huang 2017.12.28 LabelLocation Productname:WCBN3507AD6 Modelname:DVTRF001 FCCID:2AN9VDVTRF001 IC:23355DVTRF001

10 Place Vendome 75001 Paris France Date:2019/8/210 FCCID:2AN9VDVTRF001 A U T H O R I Z A T I O N L E T T E R Towhomitmayconcern:

We,Devialet.herebyauthorizesAmandaWu/SeniorSpecialistofBureauVeritasConsumer ProductsServices(H.K.)Ltd.,TaoyuanBranch(BVCPSTaoyuan),toactonitsbehalfinallmatters relatingtotheFederalCommunicationCommission(FCC)applicationforequipmentauthorization inconnectionwiththeFCCIDlistedabove,includingsigningofalldocumentsrelatingtothese matters.AnyandallactscarriedoutbyAmandaWu/SeniorSpecialistofBVCPSTaoyuanonour behalf,withinthescopeofthepowersgrantedherein,shallhavethesameeffectasactsofitsown. Ifyouhaveanyquestionsregardingtheauthorization,pleasedonthesitatetocontactus. Name:ThiagoBARBOSA Title:ProductCertification&ValidationManger Tel:+33637966065 Email:Thiago.barbosa@devialet.com

BTOz-27-UNy vt0z-9T-das O's Ov

(quasin>) o8o4 9g aweu Auedwo2 payepdry

(2x2}0SqQ0) Pjay ai J34 PEPPY ptoz-Ez-Aew ov OE (838;08q0) UoReWOsU! Jana] parepdn ZT07Z-TE-uer oe (239]0Sqo) aye)duiay Auedwio> payepdn 002-SZ-109 9002-HT-AON ayeq panoiddy AJO4SIH UOISIADY

(838]05q0) Sulpsom pasinoy

{a 3ajOsqo) aseajay jeu)

(2x2]0Sqo / yuasIN9) yUsWIPUaUY 40) UOSeaY Project and Product ertification Representative Authorization Letter CS-F 18: Project and Product Certification Representative Authorization Letter Page 4 of 2 Milpitas, CA 95035 Bre: e-FSe bt) Fax: 408-526 1088 mail: TCB@siemic.com Re: Product Certification Representative Au zation Letter cH Devialet hereby authorize Bureau Veritas Consumer Product Services, nc, to act as a Certification Body for certifying for the following project(s):

FCC ID : 2AN9V-DVTRFOO1 Product Description : Modular

(ell aa (011-0) Pm Dae LO Ne DEVIALE POC uC Pe HG Ucaae ia CRA PES aren] a (OM Len Pree elem ec A Milpitas, CA 95035 USA Name: Thiago BARBOSA Title : Product Certification & Validation Mange SCPE cece Pel cta chy E-mail : Thiago.barbosa@devialet.com

-F 18: Project and Product Certification Representative Authorization Letter Page 2 of 2

Description of Permissive Change Date: August 15, 2019 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Ref: FCC Class II Permissive change for FCC ID: 2AN9V-DVTRF001 Applicant: DEVIALET Dear Examiner, This is to request a Class II permissive change for FCC ID: 2AN9V-DVTRF001, originally granted on 04/27/2018. The difference compared with original is adding antenna, the product hardware is identical. If you have any questions regarding this application, please feel free to contact me. Sincerely yours,

===================================

Amanda Wu / Senior Specialist Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch Address: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN (R.O.C.) Tel: +886-3-264-1929 Fax: +886-3-327-0892 E-mail: amanda.wu@tw.bureauveritas.com

To whom it may concern:

|, the undersigned Margot Miscopein Saler of Devialet hereby authorize Thiago BARBOSA o Devialet to act on my behalf in all matters relating to all processes required in FCC and any communication needed with the national authority. Any and ail acts carried out by Thiago BARBOSA on my behalf shall have the same effects as acts of our own. OL Ha .O i CTU SyA 0) CORPO L UE ead suis AUTHORIZATION LETTER eA = Vv I lan = a

) Aree ea WRG ZUR) TS Sea nya FR22602155682 - RCS : PARIS 502 165 Margot Miscopein Saler Title : Certification Project Lead If you have any questions regarding the authorization, please dont hesitate to contact us. Thank you!

Tec A eLt ES

) DEVIALET

(eee a Cl cca Oke Re mee UE LO py) MPA Lol Pall DTS-UNII Device Declaration Letter To whom it may concern :

We have declared below featured for FCC equipment authorization, Device FCC ID :2AN9V-DVTRF001

(1) DFS Device -- (Master ,() Client with Radar detection capability , PRO ener tae cums cn Ueike|1e 0 ge al LN 74) Active / Passive Scanning , adhoc mode access point capability Frequency Band Active Scanning ere Ee AS] Ad Hoc Mode or Nee oie sleta a

{MHz} (the device can OUR UL ae ad a) Si mele tes capability transmit a probe can listen only with capability

| 2.4~2.4835GHz_|__ [1 Yes, ino | Blves Te Re ae Fj ea ee cl 5.725~5.85GHz

(3) Toetarnmee ics ie 1 aie i oe i ae Ny) If yes, pls explain how it was implemented - (pis also help to provide detail of options for each country Rr foi (leap)

(4) LV evs an Iso ore VC -Ut 1a =< OO pls check below

(a master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal In this mode tis able to select a channel and nitate a network by sending enabling signals to other devices BA client device 1s defined as a device operating in a mode _n which the transmissions of the device are under eee ea aur meee aCe mee eae -]9) BOM CMe

(5) For client devices that have software configurat on control to operate in different modes (active scanning in some and passive scanning in others) nd fferent bands (devices with multiple equ pment classes or those that operate on non-DFS frequenc es) or modular devices which configure the modes of operations through software, the app cation must provide software and operations description on how the software and or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer Eee an a NoApply, (If apply , pls help to provide explanation on it was implement, and how software was controlled lao 10, Place MAINT PAV 8f]

DUS See ae ord 682 00071 MS Vice Ta Le Pie eee Thiago BAR Product Certification and Validation anage!

BSR Tek Bs) iago.barbosa@

Reason for Amendment (current / obsolete) 4 o

z o Initial Release (Obsolete) Added IC Modular Letter (Obsolete Add LMA and MA option (Obsolete Revised per RSS Gen issue 3.0 (Obsolete) Removed Foot(2) (obsolete) Adding New note per KDB996369 D01 V01R03 obsolete) Updated company template & Added text box obsolete]

Updated modular requirement (obsolete) Updated template to meet RSP 100 issue 10 obsolete) Dec-04-2006 April 14.2010 Jan 12 2011 July 19 2011

o dan-31-2012 7.0 Sept 05 2014 March 19-2015 duly 28, 2016 abel Be Ba eller e scar) Lamers lk i}

Cac eo yoa ass) eve ce ey toasts) Email: TCB@siemic com vee iL:

ma]

August 29 201 SCS-F26 Modular Approval Lette:

) DEVIALET RRC em eee ars Date: 2018/4/3 Product name) FCC ID: _2AN9V-DVTRF001__, is seeking FCC Authorization as a [X]Single Modular transmitter /(_] Single Limited Modular Approval (Please check one) The EUT meets the requirements for Dx] Single Modular approval / (_]Single Limited Modular Approval (please check one) EEG PNPM One Tek OR MMS R nuance Mec saree Be tested in a stand-alone configuration, i.e., the antenna, AC or DC power and data input/output lines must be connected to the module but, the module must not be inside another case during

(Sey Be labeled with its own FCC ID number and if the FCC ID ts not visible when the module is installed inside another device, then URNS e gu Me Ne ROR Ue UCR en Reale) mic also display a label referring to the enclosed module. modular transmitter is manufactured so that the user can not vA Cues m UM CLL mie ery Sar CRelcl(t CA ee) a en elo Za US CLL aL Neo ue CCR me meg Chan ue LEU Ce ee keg ook cue Stilt LMA will also be issued in those instances where applicants can demonstrate that they will retain control over the final installation of the device, such that compliance of the Oe Ved rome eee elo eee el ben Ure RCE ec Sac R UC en ecie race neat e mec UCOR Cu con Rec ic) produced by a specific manufacturer When LMA is sought, the application for equipment certification must specifically state how control of the end product into which the module will be installed, and will be OEIC UMUC eens Tt eee ens ye Rec Please prowde Clear and specific instructions describing the conditions limitations and procedures for third-parties to use and/or integrate the module into a host device For non-Software Defined Radio transmitter modules where software is used to ensure compliance of the device, technical descnption of how such control is anplemented to ensure prevention of third party modification must be provided see KDB 59428 Note 1: Compliance of a module in its final configuration is the responsibility of the applicant. A host device will not be considered certified if the instructions regarding antenna configuration provided in the original description, of one or more separately certified modules it contains, were not followed. Example: A separately ceniified low-power transceiver module using Bluetooth technology which is housed in a desktop computer, laptop or peripheral does not require the overall system to be recertified, if the desktop computer, lap efipheral, as a stand-alone unit, complies with all applicable technical standards. Margot MISCOPEIN SALER Certification project lead 337 61 119136 margot.miscopein-saler@devialet.com SCS-F26 Modular Approval Letter Pace Bere R Re cl eRe MSL

BE Eg Rev 5.0

) DEVIALET UEC eee UU ee Py Roan Clee LM eae) To: Federal Communications Commission Office of Engineering and Technology Somat 1 urelera-1 CLM RUS eL Per eeer A elem UM erl Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID:2AN9V-DVTRF001 To Whom It May Concern Pursuant to sections 0.457 and 0.459 of CFR 47, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in thi certification application be temporarily withheld from public disclosure for an initial period of 60 days. e.g. User Manual e.g. Internat Photos e.g. Test Setup photos Comet Mae oy The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerel Product Certifica 1on an Validation Manage!

33 6 37 96 60 65 thiago.barbosa devialet.com SCS-F19: Confidentiality Request Lette rn ;

h Bry oN eta Oey.) Product Certification and Validation Manage See RPA Mtns h) thiago.barbosa@devialet.com If you should have any question(s) regarding this declaration, please don't hesitate to contact us Thank you!

We, Deviatet deciare that tne device doe non-US channels in all the operational not suppo_ c annel 12 ~ 13 in 2.4GHz band and an mode(s) for the following product. FCC ID:2AN9V-DVTRFOO