Instructions of RF42 1 appearance 2 Key function Key value CHILD LOCK PAIR M Specification Press and hold button till the backlight flashes remote enters locking or unlocking mode press and hold button ,the remote enters pairing mode Click button, the bed moves to M position, press and hold M button for 5s, until backlight flashes, the control set the current position as M position FLASH LIGHT Click button, open or close flash light HEAD UP Press and hold button, head actuator moves out, stop HEAD DOWN Press and hold button, head actuator moves in, stop FOOT UP Press and hold button, foot actuator moves out, stop FOOTDOWN Press and hold button,foot actuator moves in, stop when when released when released when released released ZG FLAT TV Click button, the bed moves to zeroG position, press and hold zeroG button for 5s, until backlight flashes, the control set the current position as zeroG position Press and hold button, the bed goes flat Click button, the bed moves to TV position, press and hold TV button for 5s, until backlight flashes, the control set the current position as TV position ANTI SNORE Click button, the bed moves to antisnore position, press and hold antisnore button for 5s until backlight flashes, the control set the current position as antisnore position Lounge Click button, the bed moves to Lounge position, press and hold Lounge button for 5s, until backlight flashes, the control set the current position as Lounge position MASSAGE HEAD Click button to switch massage intensity of head massage motors TIMER Click button to switch massage time MASSAGE FOOT Click button to switch massage intensity of foot massage motors MASSAGE ON/OFF Click button to turn on/off head & foot massage motors UNDER BED LIGHT Click light button to turn on/off the under bed light MASSAGE TYPE Click button to switch massage mode LED 1 LED 2 LED 3 10 MIN 20 MIN 30 MIN Massage time: 10 minutes Massage time: 20 minutes Massage time: 30 minutes Other function 1:
Zero G + Flat Press and hold zeroG and flat button for 5s until backlight flashes, the memory positions of control box reset to default settings FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirment. The device can be used in portable exposure condition without restriction. ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement. Le matriel est conforme aux limites de dose d'exposition aux rayonnements noncs pour fac un autre environnement. ce dispositif a t valu satisfaire l'exigence gnrale de l'exposition aux rf.