User manual 1 appearance 2 Key function Key value PAIR Specification press and hold button ,the remote enters pairing mode, backlight LED flashes, When the pair succeeds, the backlight stops flashing then normally on. HEAD UP Press and hold button, head actuator moves out, stop when released HEAD DOWN button, head actuator moves in, stop Press and hold when released Press and hold when released released Press and hold when released Press and hold released FOOT UP button, foot actuator moves out, stop FOOTDOWN Press and hold button,foot actuator moves in, stop when TILT UP button, tilt actuator moves out, stop TILT DOWN button,tilt actuator moves in, stop when Click button, the bed goes flat press and hold the lock/unlock is complete. button for 5s until backlight flashes, then Click button, the bed moves to zeroG position, press and hold zeroG button for 5s, until backlight flashes, the control set the current position as zeroG position button, the bed moves to TV/PC position, press Click and hold TV/PC button for 5s, until backlight flashes, the control set the current position as TV/PC position UNDER BED LIGHT Click button, the under bed light switch its on/off state;
After the under bed light opens, if do not manually close, it will automatically turn off after 5 minutes;
Click button, the bed moves to M1position, press and hold M1 button for 5s, until backlight flashes, the control set the current position as M1 position button, the bed moves to M2 position, press and Click hold M2button for 5s, until backlight flashes, the control set the current position as M2 position FLAT Lock ZG TV/PC M1 M2 FLASH LIGHT button, open flash light,closewhen Press and hold released MASSAGE HEAD+
button, head massage motor switch its Click intensityamong 1-2-3-0-1 MASSAGE FOOT+
button, foot massage motor switch its Click intensityamong 1-2-3-0-1 If the massage motors do not work, the button is invalid, if the TIMER massage motors work, click time, when massage time switch to 0, turn off the massage;
button to switch the massage MASSAGE HEAD-
Click intensityamong3-2-1-0-3 button, head massage motor switch its MASSAGE FOOT Click intensityamong3-2-1-0-3 button, foot massage motor switch its MASSAGE TYPE button, to switch the massage mode of massage Click motors,massagemode switches among type0 type1 type2 type3type0; this button can only switch the massage mode, it can not open massage motors FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirment. The device can be used in portable exposure condition without restriction. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. ISED RSS Warning/ISED RF Exposure Statement ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment.The device has been evaluated to meet general RF exposure requirement. Le matriel est conforme aux limites de dose d'exposition aux rayonnements noncs pour fac un autre environnement.ce dispositif a t valu satisfaire l'exigence gnrale de l'exposition aux rf. 3/3