Rxt: 147x312mm WR:
ROAST Smart Coffee Makerr User Manual 128e%$h] ZiT AA TABLE OF CONTENTS Important Safety Information 2 Introduction ..- oe a oe a wo 5 Overview 4 Specifications 5 Controls and Features 6 Operating Instructions .-... = sss 2a 7 Auto Shut-off Safety Feature 10 Install the Quirky App .---- < = N Using Alexa 7 Using Google Home ... _ - _ 19 Cleaning 23 Descaling the Coffee.Maker 23 Troubleshooting 24 FCC Statement = < = aeons 25 RF Warning Statement 25 Warranty. ........--------------------------- 2222222 eee 26 WARNING: Risk of Fire or Electric Shock. Do not remove the bottom cover. No user serviceable parts inside. Repair should be done by authorized service personnel only Pictures in the manual are for reference only. IMPORTANT SAFETY INFORMATION SAVE THESE INSTRUCTIONS /\\
When using your Roast, basic safety precautions should always be followed. Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Quirky Roast is designed only for home use and domestic commercial applications such as small offices, restaurants, and hotels. Neither Quirky nor its affiliates are responsible for damage resulting from improper use or for damages caused by non-compliance with the information, warnings, and instructions provided in this manual. Please keep this manual in a safe place for future reference.
- Do not use appliance on wet or hot surfaces, or near an open flame or heat source.
- To protect against electric shock, do not immerse any part of appliance, power cord, or plug in water or other liquid. Unplug from outlet when not in use and before cleaning.
- To disconnect, unplug the power cord from the electrical outlet only. Do not disconnect by pulling on the cord.
- Do not operate appliance with a damaged power cord or plug. Do not operate appliance if it malfunctions or is in any way damaged
- Use appliance only for its intended use
- Closely supervise children when using an yelectrical appliance. Do not allow appliance to be used as a toy.
- The appliance has a polarized plug (one blade is wider than the other). To reduce risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. IF the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. Do not force the plug into the outlet. CAUTION: A short power cord is provided to reduce risks from entanglement or tripping over a longer cord. An extenion cord may be used when marked electrical rating is no less than the electrical rating of this appliance in the SPECIFICATIONS section of this manual. All cords should not drape over counters or tables where cords can be tripped over, or pulled on unintenionally, especially by children
- Do not place on or near a hot gas or electric burner, or heated oven. Exterme caution must be used when moving SAVE THESE INSTRUCTIONS /\\
products containing hot liquids.
- Only use fresh (potable) and cold (moderate) water. Do not use water contained in bathtubs, wash basins or other containers.
- Never touch the hot parts of the appliance, including the warming plate. Only handle the plastic parts of the appliance and the coffee pot by its handle
- Be careful not to get burned by steam evaporating from the coffee filter.
- Never use the appliance if the pot shows any signs of cracks. Only use the pot that comes with this appliance.
- Handle the coffee pot with care, as glass is fragile. Never use your coffeee machine without water in it. If you have a programmable coffee machine, make sure to fill it with water before programming it.
- Never place the empty (or almost empty) coffee pot on the hot plate when the coffee machine is runnning. Also keep from other hot surfaces to prevent the pot from cracking WARNING: Quirky Roast is not intended for use by children. It is not a toy! Do not allow children to play with any part of the appliance. Keep children away from the power cord, they can pull the unit down and be burned by hot water or become entangled in the power cord. Keep the coffee maker, the heated base, and the cord out of the reach of children at all times. WARNING: This appliance operates at very high temperatures There could be danger of scalding from escaping water or steam. Do not touch any part of the coffee maker except the stay cool handle when the appliance is in use. WARNING: Position the lid so that steam is directed away from the handle WARNING: Ensure that Quirky Roast is switched off before removing the coffee maker from the base. WARNING: There is potential injury from misuse of this product. Please refer to the actual product 1 ! Please read this manual carefully and retain for future reference. ! Please read this manual carefully and retain for future reference. SPECIFICATIONS CONTROLS AND FEATURES 9. Press ON/OFF button, the red indicator will light up. That means the automatic brewing function has started. When the The control panel consists of power button, timer, program, time you have set arrived, the green light turns up and red PME MQUIAGE 20V ia and mode controls. indicator turns off. The coffee maker starts working POWER 1000W Current / Programmed / 10. If you want to make coffee immediately, just press HEATING METHOD UNDERPAN HEATING Time Display Hour Setting ON/OFF button two times. The green indicator lights up and the appliance will operate. Prass the ON/OFF button once HEATING TYPE THERMAL LED Display 5 a again, the green indicator turns off, the coffee maker stops un lo king. COFFEE POT MATERIAL GLASS Touch Controls +- - wor
-6: ee PROTECTION AUTO SHUT-OFF = ine) | Il. After boling, when no water in tank but you keep switch H on and the carafe on heating plate, this will remain the CAPACITY 15 CUPS / 18 LITERS = => coffee or tea warm. The water in carafe can be warm at: a Ci Cc FESID AANZROAST Coffee Pot above 75C in half an hour. B. above 70C in an hour Handle INTRODUCTION Power Program Button/ Minute Setting On/Off Time Buttons/
Thank you for purchasing the Quirky Roast Smart Coffee Heating/ Umenisetiirig Maker! Ever wish you could make a pot of coffee from your Power Base x . x bed on a lazy Sunday morning? Now you can! First Use Cleaning Instructions What Type of Water Should You Use?
ba Lak as We d th f filtered water for the Roast The Roast, the WiFi smart coffee maker allows you to control Gauge Ensure the Roast is clean and all packaging has been e recommend the use of filtered water for the Roas it with the sound of your voice or a touch of your smart removed from inside and outside the product. Before using |
phone. control it with the sound of your voice or a touch of the Roast for the first time, clean it by running through a Using filtered water not only gives you the best taste, it your phone. cleaning cycle prevents sediment from building up in your coffee maker and calcifying the coffee maker. 1. Fill the coffee maker with cold, clean water to the fill line. y 2. Place the filter into the machine (without adding coffee), aC MeO eal om LUMO ig
% and close the lid The general rule for coffee is that 2 tablespoons of ground Filter coffee should be used for every 6 ounces of water. This 3 Place fhe corice Pore the heating base amount can be adjusted to suit personal tastes. 4. Connect to power source. 5. Press any button. 12:00 will appear on your display. 6. Press the Power Button once. The red LED indicator will turn on. After heating, the water will run through the Roast into the coffee pot were 7. Press PROG button one time, LED displays SET TIME. It Tank means you can set the real time. Press HOUR and MIN button to set the time you want. After setting auto program IF you release the buttons for 8 sec, it will come back to clock display automatically. 8. Press PROG button twice, The LCD displays SET TIMER, It means you can set the auto program coffee making .Also use HOUR and MIN to set the timer. When the time you have set arrived, Coffee maker will switch on automatically and start brewing. 4 5 6 OPERATING INSTRUCTIONS 1. Place the Roast on a firm and level surface 2. Pour the desired amount of clean water into the coffee maker through the water tank WATER LEVELS AND ENSURE THE LID IS ALWAYS PAY ATTENTION TO MIN / MAX PROPERLY AND FIRMLY CLOSED. A 3. Place a coffee filter into the plastic filter and fill with coffee grounds. 4. Ensure the plastic filter is aligned properly in the Roast. Close the lid. 5. Connect the Roast to a power supply. The display will show 12:00 when it is ready to use. 6. Place the coffee pot on the warming plate, ensuring that it is aligned to the tip of the funnel 7. Press power button once. The red indicator light will turn on and coffee will begin brewing. NOTE: You may remove the coffee pot to pour coffee at any time during the brewing process. It is recommended you do not do this longer than 30 seconds as it may cause brewed coffee to drip onto the heating base. 8. When brewing is complete, press the Power Button fo turn your Roast off. Setting Current Time 1. Press the Program Button until Clock is illuminated on the LED display. 2. Press Hour and Min buttons to set your current time. The coffee maker is set to military time, and your settings are from 00:00 to 23:59. 3. After you have set the current time, press the Program Button again to confirm your set time. Programming An Automatic Brew 1. Press the Program Button until Timer is illuminated on the LED display. 2. Press Hour and Min buttons to set your desired brew time The coffee maker is set to military time, and your settings are from 00:00 to 23:59. 3. After you have set the current time, press the Program Button again to confirm your desired time. 4. Once all settings are finalized, add coffee grounds to a coffee filter and load your coffee machine. Fill the water tank of the Roast. 5. Press ON/OFF twice until the red LED flashes. This will indicate your Roast will brew coffee according to your set time. 6. When the set time arrives, the red and green LED indicator will light up, brewing has begun. 7. When the time you have set arrived, Coffee maker will switch on automatically and start brewing Canceling A Programmed Automatic Brew The red LED indicator light will indicate that there is a programmed automatic brew scheduled on your Roast. To cancel the programmed brew, press the Power Button 1 times until the LED indicator light turns off. This will indicate your programmed brew has been canceled and the Roast is now set to manual use 7 Pouring Hot Coffee Once coffee is brewed, you may pour it into another container. NOTE: When pouring hot coffee, make sure you are only holding the coffee pot by the stay-cool handle. Ensure that coffee is leaving the coffee maker from the spout to better control the flow of water. Replace the coffee pot on the base when not in use, and unplug the cable from the power source AUTO SHUT-OFF SAFETY FEATURE The Roast is equipped with a safety auto shut-off feature to protect the appliance from damage in case of improper use If the Roast is activated accidentally without first being filled with water, or if all the water in the Roast has evaporated during Boiling, the auto shut-off will engage and disable the heating element. In the event that the auto shut-off is engaged, remove the power plug from the wall outlet immediately. Wait 3-5 minutes until the coffee maker is sufficiently cool Then proceed to refill the coffee maker and continue use. 8 9 10 11 INSTALL THE QUIRKY AP Cis iia SU Please scan the QR Code, or search for Quirky Before moving forward, please ensure your Roast and your 2. Select the device you want to connect from the list 3. Follow the steps as prompted by the App to finish in the App Store or Google Play. device are prepared for pairing and setup connection. If you get stuck somewhere, start again from the beginning.
- Ensure Roast has been connected to a power source 6:13.47 area
- Ensure your smart phone is able to connect to a WiFi Search network and has internet access Cancel Select type of device o 6:18 7 em 4 Search os All devices
- Download and open the App on your smart phone. < Add Device AP Mode ta Lighting Pairing Le] hur AppStore Salad 1. If this is the first time connecting a Quirky smart home | [J | Switch
: device, you can add your first device by pressing the Add Works with Sire aM Device button on the home page. Add Device Outlet e O e. If devices are connected to your Quirky App, and you want Power on your device. Press and
@ to add a new device, press the + icon on the top right to Boll Locker hold the PROG button as shown amazon alexa Google Assistant connect a new device below and confirm the LED light on the product is blinking Registration and Login onet al FD [J] Water Sensor Marc Liniado + a 1. Run the Quirky App from your smart phone ll Webi 2. Register or login. The App will take you to the home page. stX- Welcome home 7 {S Set your homeletation:getmoreinforms, > Coffee Maker All devices Living Room Bedrc wv Sous Vide in Heater Ora Q ay on Quirky { a Air Purifier s View Help No devie please add Same Light is Blinking!
Register ft by Home e 12 13 14 15 4. The App will show you a list of nearby WiFi networks. Select your home network, enter your password, and connect to it through the App. If you do not see your WiFi Network on the list, press Change Network. 6127 _ 4 Search
< Add Device Enter Wi-Fi password Only supported on 2.4GHz Wi-Fi networks
> Mares Home change Network
() password 5. Wait for your device to finish connecting. Connecting Connecting
5% 100%
Make sure your router, mobile phone and device are as close as possible Make sure your router, mobile phone, and device are as close as possible v Device found nart c v Register device to the smart c... Initializing device 6. Once your device is connected, it is ready to use. 14147 WFO Device added successfully Q Quirky <
Woe as gh Ws Fen denn.
(Living Room Master Room } |Secon...droom}
{ Dining Room Kitchen Study Room }
(Marc's...droom) Completed SING ALEXA O amazon alexa Please make sure that your Alexa app is connected to Amazon Echo and both work together successfully under your WiFi home network.
]. Log in your Alexa App, tap top left corner, and tap Skills. Your Alexa settings have been updated Househald Drop in was enabled from one of your Echo devices or from the dlexa app. The opt-in Drop. In Foature lots you automatically connect to an Echo device for a voice or a video chat Your Echo devices with a screen and the Alexa app will indicate which af your other devices are recently active ALEXA TERMS OF USE Welcome!
Quirky 0 RESULTS Sorthy Relavance Ratect Guidance Suggested oe Account linking required Shown in. English (US) ~
ABOUT THIS SKILL If you have any problems, please contact us Quirky offers the most camprehensive voice controlled smart home experience with Alexa, Control 3. Enter the account and password of your Quirky App that you created during registration or login. 4. Tap Link Now, then tap Authorize on the next page to connect Alexa to Quirky. 5. Once connected, the following page will appear. Tap Done on the top left corner to complete connection.
(Done) @ skills-store.amazon.com amazon alexa T er Quirky has been successfully linked. 6. Tap Discover Devices on the next page. Discover Devices Quirky devices must be discovered before they an be used with Alexa. 7. Wait a few seconds for Alexa to find and connect to your device through the Quirky App. You should see your device paired in your list of devices when this is complete. 8. You can now control your device with the Alexa App. 19 USING GOOGLE HOME 6. Hil PREPARATION
- Download the Google Home app on your smart phone.
+ Register your Google Account.
- Pair Roast with Quirky App and name it with a simple and easily recognizable name.
- Finish setting up Google Home. NOTE: This device currently only supports US accounts. 1. Open your Google Home App, select Account on the bottom right hand corner. Home g Q 2) Off On Play Broadcast 8 + a Thermostat Routines Add Settings Family Room 1 device Family Room Display In your home 2. Tap Settings. Matt Smith matts@gmail.com v ft Ces Home - Member CR Olocal devices
@ Set up device
(o )ssin 3. Under Google Assistant Services, tap on More Settings. Google Assistant services Shopping list Voice match Music TV & video More settings 4, At the top, tap Assistant 5. Tap Home Control. a Languages For speaking to your Assistant e.: Assistant voice How your Assistant will sound Continued Conversation For asking follow-up questions a Voice Match Teach your Assistant to recognize your vo... 9 Home control Manage the devices in your home 6. Tap * on the bottom right hand corner of the screen 9:34 7 al FH)
< Home control DEVICES ROOMS 80600 Available on Google Assistant speakers, iOS 10.0+
devices, Android 6.0+ watches and Android 6.0+ TVs Assistant Family Room Display Oo Family Room Tuya Smart i Air purifier 7. Find and add the Quirky App from the search bar. c= @
Linked
@ Quirky 5 devices Add new 6 Abode Smart Home Avr Pulse SmartHome
@ Adurosmart Home 1 Hey Yes QYWTEPRITTYFUP | ,OrP 8 Enter the account and password of your Quirky App that you created during registration or login 9. Tap Link Now, then tap Authorize on the next page to connect Google Home to Quirky. No Sl OCS 00:31 Quirky 3 9 oot]
Please login with your Quirky account 14 devices not in rooms x Ces Camera +1US *
" 8 eo" @ Coffee Maker a @ = a (e) . til Edison Bulb Matt Smith Se Fan matts@gmail.com
@ Kettle 5 = 4 al Personal info Services Kitchen LightSwitch 20 1 @ Kitch te OP) 3 CLEANING TROUBLESHOOTING FCC STATEMENT WARRANTY
]. Only clean the Roast when the power source has been disconnected. 2. Do not use abrasive cleaning tools or harsh cleaning solutions. 3. Do not immerse the heating base or the coffee makers sub base in any liquid. 4. Do not place any part of the appliance in the dishwasher. 5. To clean the exterior, use a slightly damp, lint-free cloth or sponge 6. Ensure the Roast has fully dried before plugging into a power source DESCALING THE COFFEE MAKER If you have hard water, it is recommended you decalcify your Roast coffee maker once every three months to remove build-up NOTE: if you are using Roast, and it switches off before the water is fully Roasted, this is an indicator that your coffee maker needs to be decalcified 1. Pour any descaling agent into the coffee maker as you would pour water. You may also use white vinegar. 2. Leave the coffee maker for 1 hour or following cleaning agent instructions. 3. Pour out the liquid and wipe clean with a damp cloth. 4. Refill with clean, filtered water. 5. Roast the water, and empty out ifs contents. 6. After using a cleaning agent, it is recommended you allow the Roast to go through several Boiling cycles with new, filtered water. Rinse the coffee maker with clean water after each Roast cycle 24 Please find some answers to some frequently asked questions about your Roast. If these do not address any issues you may be having, please contact Quirky customer service. Contact information is located at the end of the Warranty Section of this manual. Ql: The Roast is wont turn on. Al: Ensure your Roast is connected to a working power source Q2: The Roast turns off before water is fully Roasted. A2: You may need to decalcify your coffee maker if you are using hard water. Please refer to instructions in the Decalcification section. 25 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause undesired operation The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help. RF WARNING STATEMENT To maintain compliance with FCCs RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 7.87 inches / 20 cm between the radiator and your body. 26 This product is covered by a 90-day limited warranty. For details, please contact customer service at:
supportl@quirky.com 27