FCC ID: 2AANZ985BTL Stereo Wireless Headphones

Size: 212.3x75.5mm MB: 1O8QFARAC, IE Re TEN hl DOUBLE SIDE PRINT Vibe QUICK START GUIDE e-ssential STEREO WIRELESS HEADPHONES

CHARGING THE HEADPHONE y Charge the headphone before using it for the first time. Plug in the cable to the micro USB port and charge for at least 2.5 hours. Connect the charging cable to charging port. ie a|

Ld PAIRING YOUR HEADPHONE Your headphone will work best if it is within 30 ft. of your smart device. You may experience sound briefly cutting off if you are out of range or if your wireless connection is weak. Make sure Bluetooth is enabled on your smart phone or tablet before starting the pairing process. Vibe QUICK START GUIDE e-ssential STEREO WIRELESS HEADPHONES SPECIFICATIONS Bluetooth Version: 5.0 Wireless Distance: Up to 33ft (10m) Play Time: Up to 5-7 hours Talk Time: Up to 5-7 Hours Standby Time: Up to 100 Hours Battery Capacity: 250 mAh Charging Time: Up to 2.5 Hours FCC ID: 2AANZ985BTL BT ID: D044460 WARRANTY This product is covered by a 3 month limited manufacturer's warranty. Contact us if you have any problems at support

@dglusa.com. WARNING Keep away from water and moisture. Keep away from heat sources. Do not disassemble. Vibe QUICK START GUIDE e-ssential STEREO WIRELESS HEADPHONES PAIRING YOUR HEADPHONE (continued) Make sure the headphone is turned off before attempting to pair it with a smart phone or tablet. Press and hold the Play/Pause button to turn on the headphone. Available Devices

$ DG-98sBT

. > N Press and hold the button From your smart phone or tablet, find a list until you see the light flash of nearby devices and choose "DG-985BT". red and blue. This indicates Enter "0000" if asked. The headphone will that your headphone is beep when pairing is complete!

ready to pair. Vibe QUICK START GUIDE e-ssential STEREO WIRELESS HEADPHONES FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC INSTRUCTIONS FOR A CLASS B DIGITAL DEVICE OR PERIPHERAL Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and Vibe QUICK START GUIDE e-ssential STEREO WIRELESS HEADPHONES CONNECTION LOST?

+ If pairing the headphone does not work, turn off the headphone and repeat the steps again in Pairing your Headphone.

+ Make sure your headphone is within range of your smart device.

+ If you hear a long beep, you need to recharge your headphone. Connection may be lost due to low battery.

+ When charging your headphones, only use the enclosed USB cable. MEDIA KEY FUNCTIONS Press & Hold -

PI] Turn device on/off Reject an incoming call Press Once -

Play/ Pause music Press & Hold - Press Once -

Increase volume Next Track Press & Hold -

Decrease volume Press Once -

Previous Track Vibe QUICK START GUIDE e-ssential STEREO WIRELESS HEADPHONES used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

+ Reorient or relocate the receiving antenna.

+ Increase the separation between the equipment and receiver.

* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

* Consult the dealer or an experienced radio/TV technician for help. Company name: DGL Group, Ltd. Distributed by DGL Group, LTD. 2045 Lincoln Highway, Edison, NJ 08817, USA.

size:25x14mm

* Vibe MODEL: DG-985BT-ASST BATTERY: 250MAH CHARGING INPUT; 5V>=1A FCC ID: 2AANZ985BTL 54 BTID; 0044460 @

MADE IN CHINA oF

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-24-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AANZ985BTL

[DGL Group LTD.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature)

(Amy Chao)

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-24-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AANZ985BTL

[DGL Group LTD.] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely,

(Applicant signature)

(Amy Chao)

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Section 2.911(d)(7) USA Agent for Service of Process FCC ID: 2AANZ985BTL Product Name: Stereo Wireless Headphones Model Name: DG-985BT-ASST, DG-985BT-XXX, DG-985BT 2.911(d)(7) USA Designated Agent for Service of Process We, [DGL Group LTD.] (the applicant) designate [DGL Group LTD.] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent & Applicant Company name: DGL Group LTD. Address: 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Contact Name: Amy Chao Telephone No: 001-732-692-5180 Email: amy@dglusa.com FRN: 0022847883 Signature:

Date:Mar.24, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-comm unications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.2

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Agent Authorization Company: DGL Group,Ltd. Address: 2045 Lincoln Highway, Edison, NJ 08817, United States Product Name: Stereo Wireless Headphones Model Number(s): DG-985BT-ASST, DG-985BT-XXX, DG-985BT Product Description: Stereo Wireless Headphones We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Company: DGL Group,Ltd. Amy Chao Date: 2023-07-24

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Jul. 24, 2023 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2AANZ985BTL Model Number: DG-985BT-ASST, DG-985BT-XXX, DG-985BT To Whom It May Concern:

We, The DGL Group LTD. hereby declare that the models are identical except the appearance of the color, X is just a letter. Except for the different above, no other modification is performed. Sincerely, Signature:

Contact person: Amy Chao

DGL Group LTD. 2045 Lincoln Highway, 3rd Floor, Edison, NJ 08817, United States Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AANZ985BTL Date: 2023-03-24 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Contact person: Amy Chao