SERVICE MANUAL IFT-22132 INFOTAG 2.13 (BW/R) IFT-22132 COPYRIGHT 2010 TERAOKA WEIGH-SYSTEM PTE LTD Table of Content i) ii) iii) Notice ................................................................................................................................................. 1 Safety Information .............................................................................................................................. 2 Safety Regulations ............................................................................................................................. 2 1. General ............................................................................................................................................................. 5 1.1 Model Specification ............................................................................................................................ 5 2. Dimension ........................................................................................................................................................ 6 3. IFT-22132 Setup Diagram & Spec Setting .................................................................................................... 7 3.1 Overall Layout and Label design ......................................................................................................... 7 3.2 Exploded View ....................................................................................................................................... 8 3.3 Replacement of Info Tag Battery .......................................................................................................... 9 3.4 Button Cell Specifications ...................................................................................................................... 9 3.5 ESL Attachment (Refer to ESL Attachment Catalogue) ....................................................................... 9 3.6 Product Handling of Info Tag ............................................................................................................... 10 4. Revision Records .......................................................................................................................................... 11 i) Notice DIGI The material contained in this document is proprietary and for information only and is subject to change without notice. Teraoka Weigh-System assumes no responsibility for any errors or damages arising from misinterpretation of any procedure. Screen displays, operating procedures and supporting features might vary with different software version releases. This document shall not be reproduced whether in part or whole without the written consent from Teraoka Weigh-System Pte Ltd. Teraoka Weigh-System Pte Ltd 4, Leng Kee Road
#06-01 SIS Building Singapore 159088 1 ii) Safety Information The operator of the equipment shall comply with the safety and warning indications and procedures outlined in this document. Teraoka Weigh-System Pte Ltd assumes no responsibility or liability for failure to comply with these requirements. Repair and servicing of product, shall only be carried out by trained and qualified personnel. Disclaimer:
Specifications are subject to change without notice. All dimensions shown are approximate. Please be aware that Teraoka has indicated that its hardware and software used in the product may require additional updates in the future as our product is continually under development. The need for such updates most likely applies to the Printer software. CAUTIONS:
FOR PLUGGABLE EQUIPMENT, THAT THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. POUR LE MAT RIEL RACCORD PAR PRISE DE COURANT, LE SOCLE DE PRISE DE COURANT DOIT TRE INSALL PROXIMIT DU MAT RIEL ET DOIT TRE AIS MENT ACCESSIBLE. FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE AND RATING OF FUSE. POUR NE PAS COMPROMETTRE LA PROTECTION CONTRE LES RISQUES DINCENDIE, REMPLACER PAR UN FUSIBLE DE M ME TYPE ET DE M ME CARACT RISTIQUES NOMINALES. DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURERS INSTRUCTIONS IL Y A DANGER DEXPLOSION SIL Y A REMPLACEMENT INCORRECT DE LA BATTERIE. REMPLACER UNIQUEMENT AVEC UNE BATTERIE DU MME TYPE OU DUN TYPE RECOMMAND PAR LE CONSTRUCTEUR. METTRE AU R BUT LES BATTERIES USAG ES CONFORM MENT AUX INSTRUCTIONS DU FABRICANT. iii) Safety Regulations Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
-
-
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. 2
-
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
-
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IDA Compliance Statement: (Singapore) This equipment registered to comply with IDA (Info-Communications Development Authority of Singapore) Standard under Dealers Class License. Actual size 9mm (H) x 17mm (W) Industry Canada statement:
This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:
1) lappareil ne doit pas produire de brouillage;
2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with IC RF exposure compliance requirements, please follow operation instruction as documented in this manual. Cet quipement est conforme avec l'exposition aux radiations IC dfinies pour un environnement non contrl. Les utilisateurs finaux doivent suivre les instructions de fonctionnement spcifiques pour satisfaire la conformit aux expositions RF. Pour respecter les exigences de conformit d'exposition RF IC, s'il vous plat suivez les instructions d'utilisation document dans ce manuel. 3 For Taiwan 4 IFT-22132 Service Manual
- 65.4 (L) X 39.0 (H) X 15.3 (W)
- 59.2mm x 29.2mm x 1.05mm
- 50.4mm x 25.6mm
- 212 x 104 dots (Dpi: 111) IFT-22132 Infotag 2.13 (BW/R)
:
:
LCD Size Display Window LCD Resolution
: 26g approx.
: DC Cell Button Battery 3.0V x 1
: 0 C to + 40 C
: 85% Max. Non-condensing
: TBA
: PC plastic casing, PC battery cover
: Type Nominal Voltage Life Time Weight
- CR2450 (Cell Button Battery)
- 3.0V
- 5 years (2 update/day)
- 6.6g approx. 1. General 1.1 Model Specification Model Dimensions (in mm) Weight Power Source Operating Temperature Humidity IP Rating Housing material Battery Specification 5 2. Dimension IFT-22132 IFT-22132 Service Manual 6 3. IFT-22132 Setup Diagram & Spec Setting IFT-22132 Service Manual 3.1 Overall Layout and Label design IFT-22132 Front View Back View 7 IFT-22132 Service Manual Front Cover LCD & PCBA Back Cover Battery Battery cover 3.2 Exploded View IFT-22132 8 Battery Cover 3.3 Replacement of Info Tag Battery IFT-22132 Service Manual Location of Battery in Info Tag Battery Cover Battery Info Tag Pull off the battery cover from back of the Info Tag. i. ii. Replace the new battery. (Ensure the Battery polarity is correct) Caution: Dispose of the Battery according the Safety Guideline. Avoid placing the battery in reverse polarity. ii. Do not heat or dispose of fire. May burst or release toxic material. iii. Do not charge. iv. Do not short circuit. v. Do not solder the battery directly. i.
+
3.4 Button Cell Specifications 3.5 ESL Attachment (Refer to ESL Attachment Catalogue) For all information about the ESL Various Attachment type, function, installation etc. Please refer to ESL Attachment Catalogue http://www.digiesl.com.tw/digiesl/sys4.asp http://www.teraoka.com.tw/digi/article.aspx?id=77 http://www.digiesl.com/
9 3.6 Product Handling of Info Tag Handle product with care. Do not expose product to corrosive chemical solution, any organic solvent acidic or alkaline. If cleaning is required, wash only water or mild soap solution. Do not attempt to disassemble, apply force or heavy load to the product. No user serviceable parts inside. IFT-22132 Service Manual 10 IFT-22132 Service Manual Software Version Remarks V0.01 Tentative Edition 4. Revision Records Date Edition Status Description of Changes Serial No. 001 JUNE14 00 First Release 11