all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 4.50 MiB | January 15 2020 | |||
1 |
|
Internal Photos | Internal Photos | 2.93 MiB | January 15 2020 | |||
1 |
|
External Photos | External Photos | 2.20 MiB | January 15 2020 | |||
1 |
|
Label | ID Label/Location Info | 238.38 KiB | January 15 2020 | |||
1 |
|
Authorization Letter | Cover Letter(s) | 41.71 KiB | January 15 2020 | |||
1 | Block Diagram | Block Diagram | January 15 2020 | confidential | ||||
1 |
|
Confidentiality Letter | Cover Letter(s) | 41.36 KiB | January 15 2020 | |||
1 |
|
Declaration Letter | Cover Letter(s) | 29.86 KiB | January 15 2020 | |||
1 | Operational Description | Operational Description | January 15 2020 | confidential | ||||
1 |
|
RF Exposure Report | RF Exposure Info | 316.21 KiB | January 15 2020 | |||
1 | Schematics | Schematics | January 15 2020 | confidential | ||||
1 |
|
Test Report | Test Report | 4.88 MiB | January 15 2020 | |||
1 |
|
Test Setup Photos | Test Setup Photos | 710.75 KiB | January 15 2020 |
1 | User Manual | Users Manual | 4.50 MiB | January 15 2020 |
f660x Car Camcorder User Manual 1 2 Contents Regulatory notices ..................................................................... 3 Prohibition of co-location ........................................................... 3 WEEE Notice ............................................................................. 3 CE Regulatory Notice ................................................................ 3 FCC Regulatory Compliance.4 RF Exposure Compliance5 Notes on Installation .................................................................. 5 Caution ...................................................................................... 5 Introduction ........................................................................ 8 Features ......................................................................... 8 Package Contents ........................................................... 8 Product Overview ............................................................ 9 1.1 1.2 1.3 2.2 2.1 2.2.1 2.2.2 2.1.1 2.1.2 Getting Started ................................................................. 10 Storage Media ............................................................... 10 Insert the Memory Card ...................................... 10 Remove the Memory Card .................................. 10 Installing in Vehicles ...................................................... 11 Mount to Windshield ........................................... 11 Adjust the Camcorder ......................................... 12 2.3 Connecting to Power ..................................................... 13 LED Indicator ................................................................ 13 2.4 Powering the Camcorder On / Off ................................. 15 2.5 Auto Power On/Off ............................................. 15 Manual Power On/Off ......................................... 15 Reset .................................................................. 15 Initial Settings ............................................................... 17 Set Time Zone .................................................... 17 Set the Date / Time ............................................. 18 2.5.1 2.5.2 2.5.3 2.6.1 2.6.2 2.6 1 3 4 5 6 7 8 9 3.1 3.1.1 3.1.2 Using the Car Camcorder ................................................ 19 Automatic Record ......................................................... 19 The Recording Screen ........................................ 20 Emergency Recording ........................................ 22 Add Speed Point ........................................................... 22 3.2 3.3 Picture in Video ............................................................. 23 3.4 Driving Safety ............................................................... 23 Speed Cam Alert ................................................ 24 Speed Limit Alert ................................................ 25 Driver Fatigue Alert ............................................. 26 LDWS ................................................................. 26 FCWS ................................................................ 28 Headlight Warning .............................................. 29 Playback Videos and Photos ......................................... 34 3.7 3.8 The Playback Screen .................................................... 35 3.9 Deleting Files ................................................................ 36 3.4.1 3.4.2 3.4.3 3.4.4 3.4.5 3.4.6 Initial set up Go Dashcam application ............................ 37 Using the Go Dashcam application ................................. 40 5.1 Camera preview, record, snapshot ................................ 41 Playback, delete, download ........................................... 42 5.2 5.3 Local album .................................................................. 45 5.4 Camera Setting ............................................................. 46 Adjusting the Settings ..................................................... 47 6.1 Using the Menu ............................................................. 47 6.2 Menu Items ................................................................... 47 Installing the Software ..................................................... 52 SuperCar ........................................................................... 53 Specifications ................................................................... 54 2 About this Guide The content in this document is for information purpose and is subject to change without prior notice. We have made every effort to ensure that this User Guide is accurate and complete. However, no liability is assumed for any errors or omissions that may have occurred. The manufacturer reserves the right to change the technical specifications without prior notice. Regulatory notices This document provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for your product. Some of these notices may not apply to your product. Prohibition of co-location This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter. WEEE Notice Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in private households in the European Union This symbol on the product or on the packaging indicates that this cannot be disposed of as a household waste. You must dispose of your waste equipment and/or battery by handling it over to the applicable take-back scheme for the recycling of electrical and electronic equipment and/or battery. For more information about recycling of this equipment and/or battery, please contact your city office, the shop where you purchased the equipment or your household waste disposal service. The recycling of materials will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and environment. CE Regulatory Notice The product herewith complies with the requirements of the RED-Directive 2014/53/EU and the RoHS Directive 2011/65/EU. 3 EU Health Protection: This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. RF Exposure Compliance This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 4 Notes on Installation 1. Please measure the front windshield viewing area, make sure not to block driver's front view, install the camcorder below the rearview mirror (the central, higher right position of the front windshield). And we recommend that the sky and the land occupied by the screen 50%, fix the car holder and then adjust the camcorder so that the lane is aligned with the screen. Proper installation enables the camcorder to maximize the efficiency also can enhance the accuracy of LDWS. 2. Make sure that the lens is within the wiping range of the windscreen wiper to ensure a clear view even when it rains. 3. Do not touch the lens with your fingers. Finger grease may be left on the lens and will result in unclear videos or pictures. Clean the lens on a regular basis. 4. Do not install the camcorder on a tinted window. Doing so may damage the tint film. 5. Make sure that the installation position is not hindered by the tinted window. 6. This product is suitable for light windshield or light color heat-resistant film windows , it will affect video quality if install it on the dark windows or dark heat-resistant film windows. 7. Use the products of the attached power charger only, please do not use other brand power charger, in order to avoid equipment burn or cause the battery explosion. Caution Due to local laws and vehicles safety considerations, do not operate the camcorder while driving. Set up time zone, time and date accurately before you use this camcorder. Please use SuperCar software under the condition that Electronic Map are functioning normally. The firmware function in the camcorder is for reference only, drivers are advised to exercise discretion based on actual road conditions. The results of GPS positioning are only for reference, and should not affect the actual driving situation. The camcorder also cannot ensure the positioning accuracy. 5 GPS positioning accuracy may differ depending on weather and location such as high buildings, tunnels, undergrounds, or forests. GPS satellite signals cannot pass through solid materials (except glass). Tinted window will also affect the performance of the GPS satellite reception. GPS reception performance on each camcorder may differ. The camcorder cannot determine the accuracy of the positioning results from different hardware. The values displayed in this camcorder, such as speed and position, may be inaccurate due to the influence of surrounding environment. They are for your reference only. This product is used only for non-commercial use, within the maximum limits permitted by applicable law. We do not take any responsibilities for the loss of use of the product. This camcorder gets warm when in use; this is normal. Improper use or operation of the product may result in damage of the product or its accessories and void the warranty. Wi-Fi Signals are unable to pass through the building. The upper limit of signal transmission is 5m. Wi-Fi Operation Channel: Ch1~Ch11 The product employs wireless data communication which may interfere, or be interfered by, a near-by camcorder. Never use this camcorder in the vicinity of a microwave oven or at places where there is radio interference. Radio wave reception may be worsened in specific environments. Please be advised that if another camcorder is also using the same 2.4GHz band as this product, the processing speed of both camcorders may slow down. This product gets warm when in use; this is normal. Improper use or operation of the product may result in damage of the product or its accessories and void the warranty. The radio frequency (RF) generated by this RF electronic camcorder may cause adverse effects on the operation of other electronic camcorders and result in malfunctioning. Wireless transmitters and circuitry may also interfere with other electronic camcorders. Therefore, do observe the following precautions:
6 Aircraft: Never use a radio transmitter when you are in an airplane. Please switch off the Wi-Fi function of the camcorder. Vehicle: The radio frequency transmitted by this camcorder may affect the electronic system in a motorized vehicle. Please consult the manufacturer or dealer of your vehicle on the possible effect. Pacemaker: In order to prevent any potential interference to a pacemaker, anyone who uses a pacemaker should be advised, that, when using this camcorder, a minimum distance of 15cm (6 inch) should be kept between the camcorder and the pacemaker; and never put this camcorder in a chest pocket. In case of any doubt of interference, switch off the camcorder immediately. Medical Camcorder: If you use a personal medical camcorder, consult the camcorder manufacturer or your physician to confirm if your camcorder is sufficiently shielded from the RF transmission of this camcorder. Medical Facilities: Hospitals and medical institutes may use facilities that are sensitive to an external RF energy. Observe such instructions when the medical care personnel or any posted sign requests you to switch off any camcorder that may interfere the radio frequency. Explosion sites or any location with a posted sign: In order to prevent interfering with an explosion activity, observe all the signage and instructions in the Explosion Area or in a zone with a Switch Off 2-way Radios sign by switching off camcorders that may interfere with the radio frequency. HP Inc. is NOT responsible for the loss of any data/content during operation. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas Before you start using the system, it is assumed that you agree to the above statement. 7 1 Introduction Thank you for purchasing this advanced Car Camcorder. This product is specifically designed for real time video recording when driving. It also supports a HP rear camera. You might ask distributor for further information. 1.1 Features Full HD 1920*1080 2.0" TFT-LCD color screen 150 Wide angle lens Collision Detection, when a collision is detected, the camcorder will automatically trigger the emergency recording Parking Mode Multifunction traffic safety reminder 1.2 Package Contents The package contains the following items. In case there is any missing or damaged item, contact your dealer immediately. Car camcorder Electrostatic sticker CD-ROM Quick start guide Car charger Rear Camera
(option) 8 1.3 Product Overview No
. 1 2 Item LED Indicator LCD Color Screen 3 Menu / Back Button (
4 Playback / Up Button (
) 5 6 Snapshot / Down Button (
) Emergency Recording / Confirm Button (
) 7 Switch Camera Button (
/ 2CH) No. Item 8 Speaker 9 Wide Angle Lens 10 Microphone 11 Power Button 12 Power Connector Port 13 Memory Card Slot 14 Rear camera connector port
(option) 15 Bracket Knob Note:
Please press the button (3~7) according to the diagram notice shown on screen. 9 2 Getting Started 2.1 Storage Media 2.1.1 Insert the Memory Card Insert memory card with the pins facing forward and the screen of the camcorder facing forward too, see the picture as below:
2.1.2 Remove the Memory Card If the camcorder is power on, please power off first and wait for the procedure of switching off the camcorder completed before removing the memory card. Note:
1. Do not remove or insert the memory card when the camcorder is turned on. This may damage the memory card. 2. Support SDHC class 10 and memory storage 8GB or above (support up to 32GB). 3. Please format the micro SD cards before the initial use. The formatted file type for this camcorder is FAT32 file. 4. Periodically format the microSD card (recommended period: once a month). 10 Installing in Vehicles 2.2 2.2.1 Mount to Windshield 1. Put the electrostatic sticker onto the suggested area on the windshield. Before putting the sticker, please wipe and clean the windshield. During the installation, please make sure the bubbles in between the sticker and the window are all gone. 2. Peel off the protective plastic sheet from the adhesive pad. 11 3. Place and press the bracket firmly onto the electrostatic sticker on the windshield window. Make sure the base is securely locked in place. 2.2.2 Adjust the Camcorder 1. Loosen the knob to swivel the camcorder to adjust view angle. 2. Then tighten the knob to make sure the camcorder is securely locked in place. 12 2.3 Connecting to Power Use only the supplied car charger to power up the camcorder. 1. Connect one end of the car charger to the USB connector of the camcorder. USB port input: DC 5V / 1A. 2. Plug the other end of the car charger to the cigarette lighter socket of your vehicle. Once the vehicle engine is started, the camcorder automatically powers on. Car charger input: DC 12 /
24V. 2.4 LED Indicator Status Explanation LED Indicator Color Power off, connect external power Power on, standby Recording/ Recording and screen off Red Green Flash red 13 14 2.5 Powering the Camcorder On / Off 2.5.1 Auto Power On/Off Start the car engine, wait a few seconds to charge the camcorder, and then screen will light up and the camcorder will automatically power on and start recording. Once the vehicle engine shuts down, the camcorder automatically saves the recording and turns off the power. 2.5.2 Manual Power On/Off To manually turn on the power, press the POWER button. To turn off, press and hold the POWER button for at least 2 seconds. 2.5.3 Reset Press and hold the Power button for 8 seconds to reset the device. 15 16 Initial Settings 2.6 Before using the camcorder, we recommend you setup the correct Time zone, Date and Time. Note:
Please note that if you press the button during recording, the system will stop recording and enter OSD menu. Make sure the recording is already stopped then continue operating the menu. 2.6.1 Set Time Zone To set the time zone, do the following:
1. Press the 2. Press the button to enter the OSD menu. or button to select Set Time Zone, and then press the button for entering function menu. 3. Press the or and then press the 4. Press the button to set the current time zone, button to complete setting. button to return to recording screen. Note:
1. If Time Sync. is on, camcorder clock will be calibrated via satellite clock signal based on Set Time zone. 2. If satellite positioning is not successful, camcorder clock will run based on user defined time. 17 2.6.2 Set the Date / Time To set the correct date and time, do the following:
1. Press the button to enter the OSD menu. 2. Press the or button to select Date / Time, and then press the button for entering function menu. 3. Press the or button to adjust the value, and then press the set the next field. button to 4. Repeat step 3 until the date and time setting is completed. Note:
To ensure the accuracy of the video file time, please reset the date and time when not in use over 7 days. 18 3 Using the Car Camcorder 3.1 Automatic Record Start the car engine, wait a few seconds to charge the camcorder, and then screen will light up and the camcorder will automatically power on and start recording. Recording will automatically stop when the engine is switched off. Note:
1. Some vehicle power supply would not turn on / off automatically with the car engine start, if the camcorder cannot automatically power on/off with the car engine, please manually connect the power supply with the vehicle power, and then power on, or manually power off the camcorder and then release the connector with the car power supply. 2. It can be configured to save a video file for every 30 seconds, 1 or 3 minutes of recording. 3. All the videos and photos are saved in the memory card, if memory card is full, loop recording will generally overwrite the oldest video file. 4. The camcorder is built-in super capacitor. After start the car engine, please wait a few seconds for charging the camcorder, and then the camcorder will automatically power on and start recording. 19 3.1.1 The Recording Screen No. Icon Item Description 1 2 3 4 5 Recording Duration Indicates the video current duration. Date / Time Indicates the current recording date and time. Menu Button button to enter the OSD During video recording, press the menu. Add Speed Point Button During video recording, press the button to add a speed cam point. PIV (Picture in Video) Button Press to capture video screen shots from the front camera. 20 Emergency Recording Button During video recording, press the button to enter emergency recording mode. Switch Camera Button Resolution icon to switch VIV screen. Press
(Rear Camera is not included in standard package. Please contact distributor for further information.) Indicates the video resolution. Voice Record icon Indicates voice recording sets as off, the sound will not be recorded. Satellite Positioning icon Indicates the strength of satellite positioning. If the icon shows in red on screen, it indicates that the camcorder cannot complete the satellite positioning. Power icon Indicates camcorder is connected with power. VIV (Video in Video) Indicates rear camera recording screen.
(Rear Camera is not included in standard package. Please contact distributor for further information.) Wi-Fi Wi-Fi on Wi-Fi off 6 7 8 9 10 11 12 13 21 3.1.2 Emergency Recording To Start the Emergency Recording, do the following:
1. During Video Recording, button to enter press the emergency recording mode, the Emergency message will be shown immediately on the upper left corner of the screen, and the recorded file will be protected. 2. The emergency video recording length is same as the recording interval setting. When the emergency recording length reaches the setting, the system will return to the general recording mode. Note:
1. If the Collision Detection function is enabled and a collision is detected, the camcorder will automatically trigger the emergency recording. 2. The emergency file is created as a new file and saved in Emergency folder, which will be protected to avoid being overwritten by normal loop recording. The Emergency folder will occupy 40% of available memory card capacity. For example, if you use 8GB memory card, about 3.2GB memory space will be saved for emergency files. When the Emergency folder is full, the oldest emergency file will be automatically deleted by the newest emergency file. 3.2 Add Speed Point You may customize speed cam positions in this product. 1. When the GPS positioning is completed , press to update speed camera points. 2. This product features a capacity of 50 speed cam positions. In case you are trying to add more than that, the system prompts with message "Speed Position is full". Note:
You may delete custom speed cam positions by selecting the Delete Last Position or Delete All Position option from the Speed Position Management menu. Please note that all of your existing speed cam positions are deleted once the Delete All Position option is selected. Make sure you are ready to recreate your custom speed cam positions before running this option. 22 3.3 Picture in Video You can also use this camcorder to take snapshots of the current scene. 1. In recording status, press to capture recording screen shots from the front (and rear) lens. 2. When the icon shows in the central of screen, it means the screenshots is completed. Note:
1. The screen shots image resolution quality is depending on the video resolution setting. 2. The picture resolution is limited by the speed of the target object and changes in ambient lighting. The photograph function is better used for taking still pictures in accident scenes or when the car is stopped to wait for a traffic light. 3.4 Driving Safety The following driving safety function is for reference only. Drivers are advised to exercise discretion based on actual road conditions. Note:
1. The Driving Safety function is limited to triggering no more than two alarms at the same time. If a voice and alert message have been triggered, any other alarm will be ignored until either of the two is settled. 2. Satellite positioning must be completed before functions such as Speed Cam Alert, Speed Position Management, Speed Limit Alert, LDWS, FCWS and FCMD to be enabled. Be sure to check that Satellite positioning has been completed prior to using the product. 3. The detections of LDWS, FCWS and FCMD may be inaccurate when used in rain, at night or in environments of insufficient lighting. Drivers are advised to exercise discretion based on actual road conditions. 23 3.4.1 Speed Cam Alert If the Speed Cam Alert function is enabled, once your cars location is determined by GPS and approaches a speed cam, this product produces audible alert and screen message. To enable the Speed Cam Alert, do the following:
1. Press the button to enter the OSD menu.
2. Press the button to select Speed Cam Alert, and then press the button for entering function menu. 3. Press the button to select On, and then press the
button to enable the function. 4. Press the 5. The alarm screen turns red to remind you to slow down if you button to return recording screen. are driving faster than the speed limit. Note:
The speed cam alert function must have the speed cam datum from the country you use. The function will be void if the product is used in any other countries. Please consult with the shop you purchased if the function is void. There is no guarantee the speed cam datum will be included for the worldwide countries. 24 3.4.2 Speed Limit Alert If the Speed Limit Alert function is enabled, this product produces audible alert and screen message once your cars location is determined by GPS and its running speed exceeds the set limit. To set the Speed Limit Alert, do the following:
1. Press the button to enter the OSD menu. 2. Press the
/ button to select Speed Limit Alert, and then press the button for entering function menu. 3. Press the
button to set up a Speed Limit Alert to trigger this products alarm [Off / 50 ~ 200 km/h (30~125 mph)], and then press the button to complete setting. 4. Press the 5. The screen pops up red icon to remind you to slow down when button to return recording screen. you are driving faster than the set speed limit. 25 3.4.3 Driver Fatigue Alert If the Driver Fatigue Alert function is enabled, this product produces audible alert and screen message one hour after it has begun recording and repeats the alerts every half hour afterwards. To enable the Driver Fatigue Alert, do the following:
1. Press the 2. Press the button to enter the OSD menu.
then press the
button to select On, and then press the button for entering function menu. button to select Driver Fatigue Alert, and 3. Press the button to enable the function. 4. Press the 5. This product produces audible alert and screen message when button return to recording screen. Driver Fatigue Alert activates. 3.4.4 LDWS Once your cars location is determined by GPS and the LDWS function is enabled, this camcorder produces audible alert and screen message when you drive off of or change lanes at speeds over 70 km/h (43 mph). To set the LDWS (Lane Departure Warning Systems), do the following:
1. Press the 2. Press the button to enter the OSD menu.
button to select LDWS, and then press the button for entering function menu. 3. Press the
button to select On, and then press the button to enable the function. 26 4. Press the 5. After enabling LDWS, the screen will display traffic lane align button to return to recording screen.
, please adjust the camcorder so that the icon horizontal line and the eye level are overlapped and the slash lines are centered in the driving lane. 6. This product produces audible alert and screen message when LDWS is activates. Note:
1. Please measure front windshield viewing area, do not block the driver's forward field of vision, and install the camcorder below rearview mirror (upper central of the front windshield). We recommend that the sky and the ground occupied 50 % of the video screen, install the bracket then adjust the camcorder to make the lane is aligned to the lane alignment icon. Correct installation makes the camcorder to maximize the efficiency and improve the accuracy of LDWS. 2. Make sure that traffic lane align icon will not be obscured other things (e.g. hood). It may cause misjudgment if the endpoint is obscured. 27 3.4.5 FCWS Once your cars location is determined by GPS and the FCWS function is enabled, this camcorder produces audible alert and screen message when you drive at speeds over 60 km/h (37 mph) and are less than 20 m away from the car in front of you. If the camcorder not completes the satellite positioning, and the leading vehicle distance below 20 meters, it will also produce a warning screen and beep reminder. To set the FCWS (Forward Collision Warning System), do the following:
1. Press the 2. Press the button to enter the OSD menu.
button to select FCWS, and then press the button for entering function menu. 3. Press the
button to select On, and then press the button to enable the function. 4. Press the 5. This product produces audible alert and screen message when button to return recording screen. FCWS is activates. 28 3.4.6 Headlight Warning The Headlight Warning function produces audible alert and screen message when it detects poor lighting conditions through the recording displays of this camcorder, including driving in rainy or cloudy weather, at night, and in basements, parking lots, and tunnels. To enable the Headlight Warning, do the following:
1. Press the button to enter the OSD menu. 2. Press the
then press the button to select Headlight Warning, and button for entering function menu. 3. Press the
button to select On, and then press the button to enable the function. 4. Press the button to return recording screen. 5. This product produces audible alert and screen message when Headlight Warning activates. 29 3.4.7 FCMD If FCMD function is enabled, when the front car moves and you dont start to drive forward, the camcorder will issue audible alert and screen message. To set the FCMD (Front Car Move Detection), do the following:
1. Press the 2. Press the button to enter the OSD menu.
button to select FCMD, and then press the button for entering function menu. 3. Press the
button to select On, and then press the button to enable the function. 4. Press the 5. This product produces audible alert and screen message when button to return recording screen. FCMD activates. Note:
The camcorder will detects the front image change to determine FCMD notification alert, so if the car is in rest condition and front object moves, the camcorder may occur false judgment, and please judge it according to the actual driving situation. 30 3.5 Parking Mode To monitor the vehicle when it is parked, you can activate Park Recording, or Motion and Collision Detection, or Timelapse. Before you activate Parking Mode, please install ACC cable through professional car service shop. Follow the steps below to change the settings for Parking Mode:
1. Press the 2. Press the press the 3. Press the button to enter the OSD menu.
button for entering function menu. button to configure Parking Mode (Park button to select Parking Mode, and then
Recording / Motion and Collision Detection / Timelapse/ Off), and then press the button to complete setting. button to return recording screen. 4. Press the Note: ACC cable is not included in the package. Please ask for more information from your distributor. 3.5.1 Park Recording
In normal recording, press and hold POWER key for 3 seconds, the screen will show message Press OK key to power off or enter Park Recording after 10 sec. Please wait for 10 seconds and the camcorder will enter Park Recording automatically. The camcorder will turn off the screen temporarily, but still in recording status. Once the collision or vibration is detected, it will automatically trigger emergency recording.
- To disable this function, press any key to wake up the screen, and press again any key to resume to normal loop recording. Note:
1. The video file taken in this mode is same as normal loop recording mode. It will be saved in the Video folder. And the emergency file will be saved in the Emergency folder. 2. The file size is according to Record Interval setting. 31 3.5.2 Motion and Collision Detection
In normal loop recording mode, press and hold POWER key for 3 seconds, the screen will show message Press OK to power off or enter Motion and Collision Detection after 10 sec. Please wait for 10 seconds and the camcorder will enter Motion and Collision Detection automatically. The camcorder will turn off the screen temporarily, but still in standby detection status. When the camcorder detects any motion in front of lens or any vibration/collision, the video recording will be triggered and the event will be recorded.
- To disable this function, press any key to wake up the screen, and press again any key to resume to normal loop recording. Note:
1. The video file taken in this mode will be saved in the Emergency folder. 2. In this mode, the event will be recorded for 10 seconds (per file). If the event lasts more than 10 seconds, the camcorder will keep recording up to 2 minutes. 3.5.3 Timelapse
In normal loop recording mode, press and hold POWER key for 3 seconds, the screen will show message Press OK to power off or enter Timelapse after 10 sec. Please wait for 10 seconds and the camcorder will enter Timelapse automatically. The camcorder will turn off the screen temporarily, but in timelapse recording status.
- To disable this function, press any key to wake up the screen, and press again any key to resume to normal loop recording. Note:
1. The video file taken in this mode will be saved in the Video folder. 2. In this mode, the camcorder is continuously recording by one second one frame. For example, 30 minutes recording will be saved in one minute. 3. The file size is according to Record Interval setting. 32 3.6 Collision Detection If the Collision Detection function is enabled, this camcorder begins emergency recording once it detects any collision. Sensitivity of the Collision Detection function is set to Normal by default, if user wants to change the settings of Collision Detection, do the following:
1. Press the 2. Press the button to enter the OSD menu.
then press the
button to select Collision Detection, and button to change the sensitivity of this button for entering function menu. 3. Press the camcorders collision detection (High Sensitivity / Normal Sensitivity / Low Sensitivity / Off), and then press the button for entering function menu. 4. Press the button return to recording screen. 33 3.7 Playback Videos and Photos 1. If recording is in progress, press the button to stop recording and enter Menu.
2. Press the or button to select Playback and press the button. 3. Press the or button to select Video, Emergency or Picture category and press the button. 4. Use the or playback, and press to select the video or photo you want to button to confirm your selection. Or, press to switch recorded files by front or rear camera. 34 3.8 The Playback Screen No. Item Description File name File name Duration/ Total recorded time Indicates the video elapse time/ Indicates total recorded time Return Previous File Button Press the video or picture. Press the to return recording screen. button to return preview screen of button repetitively Press button to view previous file. Next File Button Press button to view next file. Playback/
Pause button Lens Switch Button Press the button to play or pause the video. In playback mode, press with dual lens recording file. (Rear Camera is optional.) button to switch files Stamp print Indicates date and time stamp File Current file / total file number 1 2 3 4 5 6 7 8 9 35 3.9 Deleting Files To delete file(s), perform the following steps:
1. Press the button to stop recording and enter the main Menu. 2. Press the press the or button to confirm. button to select File Deletion and 3. Press the or button to select folder and press the button to confirm. The following options will display in screen, Item Delete One Delete All Description Delete the current selected file. Deletes all files in this folder. 4. Use the or delete, and press to select the video or photo you want to button to confirm your selection. Note:
1. Deleted files CANNOT be recovered. Ensure the files you wish to preserve are backup before deletion. 2. If the file is taken by front camera and rear camera at the same time, no matter you delete video or picture from Front camera folder or Rear camera folder, both front camera file and rear camera file will be deleted. 36 4 Initial set up Go Dashcam application 4.1 Camcorder application installation The camcorder allows you to connect to the mobile devices via the App. When using for the first time, install the [Go Dashcam] App for your mobile device. 1. Download Go Dashcam App from Google Play or App Store. 2. Install the App. 37 APP layout and features may be changed subject to different software versions. Please refer to Google Play or APP Store for update. 4.2 Wi-Fi connecting 1. Press the Power button to switch on the camcorder. 2. Enter Menu and go to Wi-Fi option; choose ON to activate the wireless network. 3. The camcorders screen will display Wi-Fi Device ID and Password. Using the Wi-Fi function of your mobile device, search for the camcorder ID hp_f660x_123456 from the list
(last 6 numbers are system random numbers). Enter default password 12345678. 4. There is a Wi-Fi icon on the camcorders screen. Once the icon is blue, your connection has been successfully established. Note:
1. The mobile device shall be within a maximum of a 5m distance from the camcorder without any buildings in between. 2. When the Wi-Fi function of the camcorder is ON but not yet connecting with your mobile device, or the connection is disconnected, the Wi-Fi icon on camcorders screen will be white, and you will need to re-activate the Wi-Fi and re-pair with your mobile device. 38 3. After connecting the mobile device with the camcorder, and activate app feature Camera Preview, all the button operation of the camcorder will be disable; all the operations shall be carried out via the Go Dashcam App. 4. The language of the Go Dashcam App will be consistent with your mobile device, beyond the language options, the App will be activated with default language. 39 5 Using the Go Dashcam application Touch [Go Dashcam]
icon to activate the application. The main screen will pop up. Follow the below instruction to operate this application. 40 5.1 Camera preview, record, snapshot You can use this feature to preview, record or take snapshot. 1. The mobile device will display camcorders preview screen. The camcorder will lose control and screen will show Network Streaming. Please use Go Dashcam app to operate the camcorder. 41 1 2 3 icon Description Start/stop recording Snapshot (no matter in front camcorder or rear camcorder preview, once you touch this icon, both of front and rear camcorder will take photo.) Switch front and rear camcorder preview 5.2 Playback, delete, download You can use this feature to playback or delete the file saved in camcorder, or to download the file from camcorder to your mobile device. 1. Touch the icon
[Video playback] or
[Picture playback]. 2. The files saved in the camcorder will be displayed on your mobile device. Camcorder will stop recording for a few seconds until your mobile device finishes reading the saved files from camcorder, and screen will show Network Playback. 3. Touch the preview image of video or picture to playback. 4. Touch the right top corner Select and pick up the files that you want to delete or download, and touch below icon to execute. 42 1 2 3 4 Icon Description Switch front and rear camcorder Download the file from camcorder to your mobile device Delete Exit 43 Note:
1. If you find the video playback without audio, please check if you turn on Voice Record on the menu. If you do turn it on, it means the mobile device itself doesnt support the video decoding. Its not the problem of the file. We recommend you to install a free app software such as VLC to playback the file. 2. Deleted files cannot be recovered. Ensure the files have been backed-up before deletion. 3. Picture and video files could be downloaded to the internal memory of your mobile device. Use the application program in your mobile device to view the file. 4. The downloaded videos or pictures will be saved in the album of your mobile device, at the mean time it will create a new folder Go Dashcam. You can preview the files from the album. 44 5.3 Local album You can use this feature to playback or delete the file that you download to your mobile device. 1. Touch icon 2. Pick up the file that you want to playback. 3. The downloaded videos or pictures will be saved in the album of
[Local Album]
your mobile device, at the mean time it will create a new folder Go Dashcam. You can preview or delete the files from the album. Note:
1. Deleted files cannot be recovered. Ensure the files have been backed-up before deletion. 2. If you find the downloaded files could not be played or without audio, which means the mobile device itself does not support the video decoding. Its not the problem of the file. We recommend you to install a free App software such as VLC to playback the file. 45 5.4 Camera Setting You can use this feature to set up your car camcorder. 1. Touch icon 2. Refer to the below table for details of menu items and available
[Camera Setting]. menu options. Menu option Description Available option Resolution Set the desired video resolution. Record Interval Voice Record Time Stamp Save respective video files in a length of the selected duration. Setting for activating audio in the video. If the time stamp is enabled, recording files or photos will show the date and time. 1080p 30fps HDR 1080p 27.5fps HDR 720p 30fps HDR 720p 27.5fps HDR 30 sec / 1 min / 3 min On / Off On / Off Default Format Return to factory default setting. Yes / No To format the memory card, all the files in the camcorder will be deleted. Yes / No WiFi Setting To set up Wi-Fi password Firmware Version Indicates the current car camcorders firmware version. App Version Indicates the current application version. 46 6 Adjusting the Settings 6.1 Using the Menu You can customize the general settings via the on-screen display
(OSD) menus. 1. Press the 2. Press the press the 3. Press the button to enter the OSD menu.
button to select menu item, and then button for entering function menu.
then press the button to select or adjust the value, and button to confirm setting. button to return recording screen. 4. Press the 6.2 Menu Items Refer to the below table for details of main menu and function list. Menu option Description Available option Playback Wi-Fi Select the file category that you want to view. Video Emergency Picture Set up Wi-Fi linkage of a mobile phone. On / Off Satellite Status Displays the current state of the satellite reception. Satellite Synchronization If the satellite time is enabled, the car camcorder clock will synchronize according to the satellite time zone you set. When you turn on this feature, it will display the satellite time preferentially, and cannot be manually changed. On / Off Speed Unit The system displays the speed setting unit. KM/H / MPH 47 Menu option Speed Cam Alert Speed Position Management Speed Limit Alert Description If the Speed Cam Alert function is enabled, once your cars location is determined by GPS and approaches a speed cam, this product produces audible alert and screen message. Add Speed Point: The satellite positioning will manually add speed camera location. You can add up to 50 speed camera locations to the built-in system. Delete Last Position:
Delete the last speed camera point. Delete All Position:
Delete all speed camera point. Set a customized maximum speed limit. When the vehicle speed exceeds the maximum, an audible alert is automatically triggered and a warning message is displayed on the screen. Set Time Zone Set the time zone you are in. Date / Time Set the date and time. Language Language setting. Available option On / Off Add Speed Point / Delete Last Position / Delete All Position
Press the button to set the speed limit. You can set the off, or set speed limit from 50 to 200km/h (30 to 125mph)
button Press the to set the satellite time. You may customize it between GMT -12:00 ~
GMT +14:00 Press the to adjust the value, and then press the button to set the next field, and complete setting According to the actual shipping regions. button
Time Stamp If the time stamp is enabled, recording files or photos will show the date and time. On / Off 48 Menu option Description Available option 1920x1080 30fps HDR 1920x1080 27.5fps HDR 1280x720 30fps HDR 1280x720 27.5fps HDR button Press the to set the exposure value. It can be set between -2 ~
+2
On/ Turn off after 7 sec /
Turn off after 1min/ Turn off after 3min On / Off On / Off
Press the to set the volume. It can be set between 0 ~ 10. button 30 sec. / 1 min. / 3 min. Off/ Park Recording /
Motion and Collision Detection / Timelapse High Sensitivity / Normal Sensitivity / Low Sensitivity
/ Off On / Off Resolution Setting of video resolution. EV Setting of exposure value. Set LCD off time. Camcorder screen will be off after a set time if no operation is detected during the standby or record mode. Press any button will switch it on. (Recording is not affected when screen is off). Setting for activating audio in the video. Enable / disable power-on sound and key tone. LCD Setting Voice Record Key Tone Volume Adjust the sound volume. Record Interval Parking Mode Collision Detection Driver Fatigue Alert Save respective video files in a length of the selected duration. If one of parking mode is activated, the camcorder will enter parking mode 10 seconds after disconnect the external power. If Collision Detection is activated, this camcorder starts emergency recording once it detects any collision. When Driver Fatigue Alert is enabled, audible alert and screen message will be activated 1 hour after the camcorder is powered on, with a repetition every 30 minutes. 49 Menu option Headlight Warning LDWS FCWS FCMD Description When Headlight Warning is activated, camcorder will issue an audible alert and screen message reminding that insufficient brightness is sensed on the recording face. Once your cars location is determined by GPS and the LDWS function is enabled, this camcorder produces audible alert and screen message when you drive off of or change lanes at speeds over 70 km/h (43 mph). When FCWS is activated after satellite positioning, camcorder will issue audible alert and screen message when vehicle speed is above 60 km/h (37 mph) and the distance with the front vehicle is less than 20m. Available option On / Off On / Off On / Off If FCMD function is enabled, when the front car moves and you dont start to drive forward, the camcorder will issue audible alert and screen message. On / Off Video Emergency Picture 60Hz / 50Hz File Deletion Delete the file(s). Anti-flicker Domestic power supply varies by area. It is recommended that you should check the Table of voltage and frequency of different countries for the correct setting. 50 Menu option Description Available option Format Default Format the memory card inserted in the equipment. All the files in the card will be erased. Yes / No The system reverts to the default setting. Yes / No Firmware Version Indicates the current firmware version. 51 7 Installing the Software 1. Place the attached CD ROM into the CD player. 2. If the CD does not execute automatically, please use Windows File Manager to execute the Install_CD.exe file in the CD. The following screen will be shown up. 3. Press the [Menu] item to start the installation process according to the instructions on-screen. 52 8 SuperCar No. Item No. Item 1 2 3 4 5 6 7 8 Front Camera Playback Play / Pause Previous Next Stop Electronic Map Compass Speed Meter 9 10 11 12 13 14 15 File Path Browser File File List Rear Camera Playback Volume Playback Duration / Total Duration G-Sensor Note:
1. To display the route on Electronic Map, please make sure the internet is connected before starting the video playback. 2. Video files of front-view camera (MOV) and GPS/G-Sensor files (NMEA) must be stored in the same folder before starting the playback. 3. The SuperCar software is only applicable to Windows operating system. 53 9 Specifications Item Description Image sensor 1/2.7 CMOS sensor Effective pixels 1920 (H) x 1080 (V) Storage media Supports Micro SDHC, up to 32GB class 10 speed or greater LCD display 2 LCD color TFT Lens Wide Angle Fixed Focus lens Aperture: Up to F2.2 Focus range 1.5m~Infinity Satellite System GPS Video Still image
(Photograph) Resolution: 1080P/ 30 fps1080P/ 27.5 fps 720P/ 30 fps720P/ 55 fps Format: MOV Resolution: depends on video resolution setting Format: DCF (JPG) Shutter Electronic shutter G-Sensor 3-Axis G-Force sensor ISO Auto White Balance Auto Microphone Speaker Built-in Built-in Interface Mini USB, A/V 54 Item Description Power Super Capacitor Operating Temperature Operating Humidity Storage Temperature 0 ~ 45 C 20 ~ 70% RH
-20 ~ 70 C Dimensions 58 x 43.5 x 45.3 mm Weight Approx. 82g Built-in IEEE 802.11b/g/n(HT20) Wi-Fi chip: RTL8188FTV Frequency range 2412~2472MHz(Declaration for EU) Wi-Fi Channel Ch1~Ch13(Declaration for EU) Wi-Fi Max. output 18dBm(Declaration for EU) 55
1 | Authorization Letter | Cover Letter(s) | 41.71 KiB | January 15 2020 |
Date: 2019/11/13 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2ACFI28GWM To whom it may concern:
We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Joyce Shi in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of ail documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with DigiLife Technologies Co., Ltd. This authorization is valid until further written notice from the applicant. Print Name: Joan Chao Title: Product Administrator On behalf of Company: DigiLife Technologies Co., Ltd. Telephone: 886-2-27978686 Extension: 271 joan.chao@wimi.com.tw Signature: an. Choo
1 | Confidentiality Letter | Cover Letter(s) | 41.36 KiB | January 15 2020 |
To:
Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 From: ife Technologies Co., Ltd. 8F, No. 51, Ln.258, Ruiguang Rd., Neihu Dist. Taipei 114 Taiwan Regarding: Confidentiality Request regarding application for FCC ID: 2ACFI28GWM LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential for [0] days from the grant date. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: Joan Chao Title: Product Administrator On behalf of Company: Di ife Technologies Co., Ltd. Telephone: 886-2-27978686 Extension: 271 E-mail: joan.chao@wimi.com.tw Signature: oc Chg
1 | Declaration Letter | Cover Letter(s) | 29.86 KiB | January 15 2020 |
2.4G WLAN Channels used in US We, DigiLife Technologies Co., Ltd. declare that this EUT (FCC ID: 2ACFI28GWM) doesnt have ad Hoc Mode function on non-US frequencies. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US/ Canada. For DTS part of this device, only channels 1-11 will be used in North America. Country code selection is disabled. Should you have any questions or comments regarding this matter, Please have my best attention. Print Name: Joan Chao Title: Product Administrator On behalf of Company: DigiLife Technologies Co., Ltd. Telephone: 886-2-27978686 Extension: 271 E-mail: joan.chao@wimi.com.tw Signature: Can - (how
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2020-01-15 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2020-01-15
|
||||
1 | Applicant's complete, legal business name |
DigiLife Technologies Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0023645351
|
||||
1 | Physical Address |
8F, No. 51, Ln.258, Ruiguang Rd., Neihu Dist.
|
||||
1 |
Taipei, N/A
|
|||||
1 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
U******@SGS.COM
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2ACFI
|
||||
1 | Equipment Product Code |
28GWM
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
J****** C******
|
||||
1 | Title |
Product Administrator
|
||||
1 | Telephone Number |
886-2******** Extension:
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
j******@wimi.com.tw
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 | Name |
K**** X******
|
||||
1 | Physical Address |
No.1 Workshop, M-10, Middle Section
|
||||
1 |
Shenzhen, 518057
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
86 75********
|
||||
1 | Fax Number |
86 75********
|
||||
1 |
K******@sgs.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
||||
1 | Name |
J******** S****
|
||||
1 | Physical Address |
No.1 Workshop, M-10, Middle Section
|
||||
1 |
Shenzhen, 518057
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
86 75********
|
||||
1 | Fax Number |
86 75********
|
||||
1 |
J******@sgs.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Digital Video Recorder | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output Power listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures in this filing. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. This device only supports 20MHz bandwidth mode. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd
|
||||
1 | Name |
K******** X****
|
||||
1 | Telephone Number |
+86 (********
|
||||
1 |
K******@sgs.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.1135000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC