DIGITAL VOICE RECORDER Rev. 1.0 Recording time Model DIR-908S SP
(Standard Play Mode) 240min LP
(Long Play Mode) 540min Key Features
* LCD Display : shows the status of voice recorder
* Long recording time : LP Mode /Max 540min
* 99 messages per folder (Max 396 messages)
* Automatically turns off when not in use
* Recording mode selection : SP/ LP
* Checks the available recording time left
* VOX : When there is no sound input for 5 minutes during recording ,voice recorder automatically turns to stand-by mode
* External input /output jack : provides interactive recording between voice recorder and other equipment such as computer and audio
* Auto play search : playback all messages for 5 seconds
* Digital volume control : 16 steps sound volume control
* Display sound level during recording and playback .
-1-
Parts Identification
* TOP
*Front
*Left
*Right LCD(Liquid Crystal Display) Description LCD .
-2-
Functions PLAY
REW FF REC MODE
Play/Stop button : When play ,record /stop playback ,record / playback
<< >> : When REW /FF during playback REC : Recording start /stop Mode button :When institute mode
: Volume UP/DOWN
-3-
Installing /Replacing batteries Be sure to replace batteries in stop mode 1. To open the battery cover , press and then slide it off. Insert two AAA(LR03) batteries according to the polarity indication and then slide the cover back into place. Battery Cover picture For power on
*Press Play button Battery Life Time Available Time LR03 alkaline batteries Recording Approximately 10hr. Speaker playback(VOL:5) Approximately 8hr. 2. To check the remaining battery power , press the PLAY button or REC button For power off
* Voice recorder automatically turns off if no button is pressed .
* Press MODE button once and then PLAY button to Power off by manual. Battery
-4-
Recording Recording by a built-in microphone 1 .Press the PLAY button to power on Voice recorder
2. If press the REC button ,the red Led indicator turns on and recording starts. When recording starts ,Recording number ,volume level ,time are displayed on LCD. 3. To stop recording ,press REC button . 4. Voice recorder turns off automatically ,if there is no other key input within 1 minute after stop recording.
STOP 5. If recording time exceed the maximum time or messages goes over 99messages per folder, recording doesn't go on. Recording by a external microphone Connect external microphone to line-in jack and follow the same procedure of above built-in microphone recording. Increasing the recording number during recording If FF button is pressed during the recording , the recording number will be increased one by one from current number. The recording number do not exceed 99 . Pause function Press MODE button during recording .To restart the recording press MODE button again.
- 5 -
Playback Playback 1.Press PLAY button to power on Voice recorder 2. Press PLAY button once again to playback .When Playback starts , recording number ,volume level and playback time are displayed on LCD. PLAY
. 3. To stop Playback press PLAY button . 4. If there is no key input within 1 minute after stop Playback ,voice recorder will turn off automatically. Volume adjustment 1.You can adjust volume level by UP /DOWN button in stand-by mode. 2. During Playback you can adjust volume level by UP/DOWN buttons. Fast Forward and Rewind During Playback If you press the FF/ REW button shortly during playback ,message will be fast forwarded or reversed 5 seconds. If you press the FF/ REW button long enough ,message will be fast forwarded or reversed in proportion to the pressing time of button. Searching the Recording Number If you press FF/REW button shortly in stand-by mode ,the recording number will be increased or decreased one by one If you press FF/REW button long enough ,the recording number will be increased or decreased fast.
-6 -
Playback Pause PAUSE
. If you press MODE button during playback ,voice recorder enter into playback pause mode.. To restart playback ,press MODE button again. P USE
. Auto Scanning Playback If you press the PLAY button long enough in stand-by mode ,all message will playback for 5 seconds from the current message. SCAN
. Loop function If you press UP button long enough in stand-by mode , current message will playback over again. LOOP Menu Mode explanation
- 7 -
* Press MODE button to enter Menu mode.
* You can select folder in Menu mode.
* To exit Menu mode ,press MODE button again. Folder Selection Folder
. 1. You can select A,B,C,D folder by UP/DOWN button in Menu mode. Remaining recording time of selected folder is displayed on LCD. 2. Press FF button for next menu. Message Selection
1. If press FF button 1 time at Menu mode , message number blinks. Press UP/DOWN button to select message number. Recording time of selected message is displayed on LCD. 2. Press FF button for next menu or REW button for returning to previous menu.
- 8 -
Erasing one message
1. Press FF button 2 times in Menu mode .
'Erase' appears and the message number blinks on LCD. 2. Select message number by UP/DOWN button 3. Press PLAY button to erase the selected message. 4. Press FF button for next menu or REW button for returning to previous menu. 1. Press FF button 3 times in Menu mode
"Erase" appears and a folder blinks on LCD 2. Select folder by UP/DOWN button 3. Press PLAY button to erase all message of the selected folder 4. Press FF button for next menu or REW button for returning to previous menu.
- 9 -
1
. Erasing a folder
. Erasing all
ABCD
1. Press FF button 4 times in Menu mode.
'ABCD' folder will blink on LCD. 2. Press PLAY button to erase all message of the 4 folders. 3. Press FF button for next menu or REW button for returning to previous menu. Recording Mode selection SP/LP
. 1. Press FF button 5 times in Menu mode.
'SP ' or ' LP' recording mode will blink on LCD. 2. Select SP or LP recording mode by UP/DOWN button. 3. Press FF button for next menu or REW button for returning to previous menu.
- 10 -
VOR(Voice Operating Record) Mode
Hold Mode HOLD
Play Mode ALL/ONE 1. Press FF button 6 times in Menu mode. the speaker icon ' ' blinks. 2. You can select ON or OFF of VOR mode pressing the UP/DOWN button. 3. Press FF button for next menu or REW button for returning to previous menu.
* If no voice input during 5 minutes in VOR ON mode ,automatically change to stand-by mode. 1. Press FF button 7 times in Menu mode.
'HOLD' blinks on LCD. 2. You can select ON or OFF of Hold mode pressing UP/DOWN button. 3. Press FF button for next menu or REW button for returning to previous menu. 1. Press FF button 8 times , 'ALL/ONE' appear on LCD. You can select ALL or ONE pressing UP/DOWN button.
'ALL' mode playback message from current one to the last message of folder.
' ONE ' mode playback current displayed message. 2. Press REW button for previous menu.
- 11-
Connecting external equipments
External Mic. Recording messages from external equipments. External Mic , recorder
. Connect between earphone jack of external equipment(EX.AUDIO, CD PLAYER) and MIC. Jack of the voice recorder with external cable like attached figure. You can record using external microphone to get better sound quality when the microphone is closer to sound sources.
*At this time, built-in microphone will not operate . Earphone If you want to use earphone , connect the earphone to earphone jack of voice recorder.
* At this time ,built-in speaker will not operate. AUDIO , CABLE ,Voice Recorder
-12 -
Recording messages from Voice recorder to external equipments. Connect between earphone jack of the voice recorder and MIC jack or external in-put jack of external equipment with cable
like attached figure. AUDIO , CABLE ,Voice Recorder
. Press the PLAY button of the voice recorder and REC button of an external equipment.
* If you need ,adjust the volume of the Voice recorder. Recording call conversation Phone and Voice Recorder Recording from normal phone 1. Connect with external cable ,between the MIC JACK of Voice recorder and the OUT JACK of the adapter for phone recording. 2. Connect the phone to adapter with 30cm line cord. 3. Connect the telephone line to another jack of the adapter
- 13 -
Precaution Read the following carefully before using the Voice recorder.
Operation 1. Do not use or place the product in following conditions
* At a high temperature (above 60
* Inside the car with all windows closed (in summer)
* At a high humid place like bathroom.
* At a dusty place C) 2. Avoid violent vibration or mechanical shock. 3. Do not drop the product . It could cause damage. 4. Do not apply excessive force to the LCD window . It could cause damage. 5. Magnetic cards like credit cards or subway passcard may not operate normally once it is placed near the speaker. 6. Do not use it while driving a car or working .It may cause accident. Do not use in airplanes or areas restricting the use of electronic devices.
* Our company exclude all liabilities for any loss or damage from the use of Voice recorder.
* Our company does not take any responsibility for lost messages by reasons of breakdown ,repair ,and others. Trouble shooting If any problem happens check for the following items first
- 14 -
Trouble LCD has no display Recording does not work. Playback does not work Check Have the batteries depleted?
Are the batteries inserted correctly ?
*Replace with new batteries
* Match "+" ." - "ends of the batteries with the diagram inside the battery compartment. Is the HOLD mode activated?
Are the 99 messages recorded already?
Have the batteries depleted ?
* Release the HOLD mode
* Erase unnecessary messages.
* Replace with new batteries. Is the HOLD mode activated?
No messages recorded in the voice recorder? Is any message recorded?
Have the batteries depleted ?
*Release the HOLD mode
* Check for the recording number.
* Replace with new batteries. No sound output Is the volume controller set to '0' ?
Is the earphone plugged?
* Adjust the VOLUME controller.
* Unplug the earphone
-15 -
Specifications Specifications are subject to change without notice to improve the quality Model name DIR -908S Available recording Time Maximum No. of recording Recording Device Microphone Input Output Speaker Operation Frequency range Maximum Output Battery life Power requirements Dimensions Weight Accessories SP : 240min / LP : 540 min 99 messages each folder(Total : 396 messages) Built-in 16MB Flash memory Built-in omni directional condenser microphone(mono) Built-in microphone External earphone /built-in speaker Built-in speaker (16 Ohm) Temperature 0 C 400Hz ~ 3600 Hz 80mWat ( 16Ohm built-in speaker) About 10hr. during recording , About 8hr .during speaker playback. DC 3V ,two "AAA" size alkaline batteries. 25mm * 129* 18mm 35g(without batteries) Earphone ,Battery ,External microphone ,External connecting cable ,Manual C ~ 40 Warranty Product DIGITAL RECORDER Model DIR- 908S
- 16 -
Assurance period 1 YEAR Item Sales date yy mm dd tel tel sincerely sincerely
-17 -
Customer Sales agency FCC NOTICE NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equip-
ment. Such modifications could void the user's authority to operate the equipment.