|
app
s
|
Applicant Information
|
|
|
1 2
|
Effective |
2019-04-11
|
|
1 2
|
2019-02-28
|
|
1 2
|
Applicant's complete, legal business name |
Digital Matter Embedded
|
|
1 2
|
FCC Registration Number (FRN) |
0022078604
|
|
1 2
|
Physical Address |
The OVAL, Kingsmead building, CNR Meadowbrook and
|
|
1 2
|
PO 70732
|
|
1 2
|
Johannesburg, 2021
|
|
1 2
|
South Africa
|
|
|
app
s
|
TCB Information
|
|
1 2
|
TCB Application Email Address |
t******@siemic.com
|
|
1 2
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2
|
Grantee Code |
POJ
|
|
1 2
|
Equipment Product Code |
DMLWAN915
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2
|
Name |
A****** J****** P******
|
|
1 2
|
Title |
Technical Manager
|
|
1 2
|
Telephone Number |
+2711********
|
|
1 2
|
Fax Number |
+2711********
|
|
1 2
|
E-mail |
A******@dmem.co.za
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 | Equipment Class | DTS - Digital Transmission System |
| 1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Digital Matter LWAN 915 |
| 1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 | Modular Equipment Type | Limited Single Modular Approval |
| 1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 | Change in identification of presently authorized equipment. Original FCC ID: POJOYSTERLWAN915 Grant Date: 08/27/2018 |
| 1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | No |
| 1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 | Grant Comments | C2PC to add hosts: Guppy LWAN 915, Yabby LWAN 915. PCB Antenna, -1dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.
Limited Module Approval. Power output is conducted at the antenna terminal. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators and installers must be provided with transmitter operation conditions for satisfying RF exposure compliance and must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes.
900 MHz Band operation includes DTS and Hybrid modes of operation. |
| 1 2 | Power output is conducted at the antenna terminal. Limited Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 1.04dBi for satisfying RF exposure compliance according to as defined in 2.1091. The Grantee is responsible for providing the documentation required for modular use to OEM/Integrators. This device supports 125KHz and 500KHz bandwidth modes.
900 MHz Band operation includes DTS and Hybrid modes of operation. |
| 1 2 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2
|
Firm Name |
Bureau Veritas Consumer Products Services, Inc.
|
|
1 2
|
Name |
L**** B********
|
|
1 2
|
Telephone Number |
408-5********
|
|
1 2
|
Fax Number |
408 5********
|
|
1 2
|
E-mail |
l******@siemic.com
|
|