FCC ID: 2ADWN-MC160R Watch charging wire

Watch charging wire Instruction Manual Item: 7143-65 Model: MC160-R Functions:

1. 2. 3. 4. 5. 2-in-1 (Lightning & Micro) Output Type-C output iWatch Charging Surface Type-C Input USB-A Input Whats included:

1 x Charging Cable Input: USB-A & Type-C Output: Type-C & 2-in-1(Micro &

Lightning) Wireless Output: 2.5W Charge Current: 2A Cable length: 120cm SAFETY PRECAUTIONS:

WARNING-When using this product, basic precautions should always be followed:

Read all the instructions before use. Never store or use this product in temperatures below 32F(0C) or above 115F(45C). Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time. To reduce the risk of injury, close supervision is required when the product is used near children. Do not expose the device to moisture. Do not use the device in excess of its output rating. Overload outputs above the 1. 2. 3. 4. 5. 6. Instructions:

1. Charging Mobile Phones and Other Electronic Devices:

Plug the charging cable into either the Type-C input port (4) or the USB-A input port (5) on the adapter. If using USB-A, ensure its securely con-

nected to the Type-C input port. Attach the 2-in-1(1) or Type-C(2) output port of the charging cable to your mobile phone or any other rechargeable device for charging. To charge your iWatch, simply position it on the designated iWatch charging area (3). 7. Do not use the device if damaged or 8. 9. 10. 11. 12. explosion or risk of injury. Do not disassemble the device. For professional. incorrect reassembly may or temperatures above 104F may cause explosion. To ensure product safety, ensure that identical replacement parts. Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. You must remove attachments from the phone before charging on this device.

:tnemetatS CCF This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning:

(1)

(2)

approved by the party responsible for compliance could void the users authority to operate the equipment. Note :

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/

TV technician for help. tnemetatS erusopxE noitaidaR CCF The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter. carrosserie. IC Statement :

1. 2. 1. 2. This device contains licence-exempt transmitter (s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

L appareil ne doit pas produire de brouillage;

L appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d en compromettre le fonctionnement. Radio Frequency Exposure Statement for IC This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 10 cm between the radiator

& body. Cet quipement est conforme aux limites environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 10 cm entre le radiateur et la Name of the Distributor:

Leedsworld Inc Address of the Distributor:

400 Hunt Valley Road, New Kensington, PA 15068 USA. WWW.PCNA.COM FCC ID: XXXXXXXXXX IC: XXXXXXXXXX Made in China Paper from responsible sources C170910

10 20 30 40 50

[DLL LT JL OZ Of OF 0S 09 OL 08 OE QD}OL Oz Of Ov OS 09 OL 08 D6QNZOF Oz O OF 0S 09 04 08 0600101 oz o oF os 09 oz 08 0600Zo4 oz oF OF 0s 09.02 |

smeartiaturvtvvliraivelinstivelaistvynlanstiytiastinaiyilinrtnstuseliistaisalinrtvuselintin

Digiview Technology Limited U.S. Agent Designation for Service of Process

(Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA ATTENTION: FCC Certification Section 2.911(d)(7) Information Designated U.S. Agent Company Name: AOCE Corporation Inc. FRN: 0033401381 Contact Name: Johnson.wang Address: 6547 N Academy Bivd #2266, Colorado Springs, CO, 80918 United States Telephone No: +1-346-582-5234 Email: wwbj2008@126.com This letter is to confirm that we (AOCE Corporation Inc.) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature:

Date: Jo)? jo Uy G . Signed by (Printed Name/T a Way /

The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Digiview Technology Limited FCC ID: 2ADWN-MC160R Email: aaron@digiview-life.com Contact Name: Aaron Zhang Address: Room 509, 5/F Tian Shu Block, Xinggang Tongchuanghui, No.6099 Baoan Avenue, Baoan District, Shenzhen, China Telephone No: 18938674137 Applicant Signature: (

Date: 2023.10.24 Signed by (Printed Name/Title): Aaron Zhang / Manager

Digiview Technology Limited Section 2.911(d)(5)(ii) Certification Applicant (Covered List ) Company name: Digiview Technology Limited Address: Room 509, 5/F Tian Shu Block, Xinggang Tongchuanghui, No.6099 Baoan Avenue, Baoan District, Shenzhen, China Model Number(s): MC160-R FCC ID: 2ADWN-MC160R 2.911(d)(5)(ii) Applicant filing We, Digiview Technology Limited certify that, as of the date of the filing of the application, the applicant is not on the Covered List NOTE 1, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Signature:

Name: Aaron Zhang Title: Manager Company name: Digiview Technology Limited Date: 2023/10/24 NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

Digiview Technology Limited Agent Authorization Company: Digiview Technology Limited Address: Room 509, 5/F Tian Shu Block, Xinggang Tongchuanghui, No.6099 Baoan Avenue, Baoan District, Shenzhen, China Product Name: Watch charging wire Model Number(s): MC160-R FCC ID: 2ADWN-MC160R We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2023/10/24 Name:

Aaron Zhang Title:

Manager Company: Digiview Technology Limited

Digiview Technology Limited Section 2.911(d)(5)(i) Certification Equipment Type Company name: Digiview Technology Limited Address: Room 509, 5/F Tian Shu Block, Xinggang Tongchuanghui, No.6099 Baoan Avenue, Baoan District, Shenzhen, China Model Number(s): MC160-R FCC ID: 2ADWN-MC160R 2.911(d)(5)(i) Equipment Type We, Digiview Technology Limited certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Signature:

Name: Aaron Zhang Title: Manager Company name: Digiview Technology Limited Date: 2023/10/24 NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Digiview Technology Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2ADWN-MC160R Date: 2023/10/24 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Aaron Zhang Title: Manager