Technical Specifications System Preference Working Humidity
Working Temperature
Input Battery
Wireless Frequency
Transmission Distance
Standby Time
Weight
Status Bar
Reset Button Buttons
Materials Wall Mounting Features
X1, beneath battery cover. X1, pin hole, beneath battery cover. 13 Touch buttons
Non-glassy surface to avoid scratches Using Mounting Bracket
Pairing Supports scanning QR Code or Learn Mode for pairing.
RFID Disarm Reset Supported
Supported The User Manual of Wireless RFID Keypad Please read this manual carefully before use. Please keep it properly for further reference.
1 Table of Contents Introduction
Parts List
Preparation before Use
Usage
Care & Maintenance Usage Notices Maintenance FAQ
Technical Specifications
03
05
07
08
09
10
Introduction Foreword
inside, so users can achieve operations such as arm, disarm, home arm after inputting passcode on keypad or arm/disarm by the RFID tags.
triggering alarm before disarming from keypad after entering the house.
RFID tag on the keypad to arm/disarm the system. Parts List Rechargeable Lithium-ion Battery X 1
Wall Mount Bracket X 1
3 Appearance Preparation before Use LED indicator
Battery Cover
Reset Hole Battery Tamper Detector DC-IN 4 1. Make sure the battery has been installed correctly.
time, please connect the keypad
fully charged. ON
the battery cover. Pair the Keypad with the Main Box Scan QR Code Learn Mode
3. Scan the QR Code on the back of the keypad.
settings.
settings.
Pair the RFID Tag with the Main Box Scan QR Code Learn Mode
3. Scan the QR Code on the back of the keypad.
button area until hearing a beep sound.
settings.
settings. Usage Activate Panel 1. When the keypad is in sleep mode, touching any button of the keypad could activate the keypad.
activation. Why sleep?
When the power adapter is connected, it starts providing power and charging the battery. With the help with over-charging protective circuit, we recommended users to keep the adapter connected while using.If you don't connect adapter ,Low battery: the indicator will light up for 1 second for every 9 seconds and push notification will be sent on your APP. Please charge in time Arm/Disarm/Home Arm Input the operation code, and press [Arm] [Disarm] or [Home Arm]
key.
[Arm] : Red
[Disarm] : Green
[Home Arm] : Blue Note: The operation code can be set in App.
immediately if the tag is paired before.
been correctly paired. SOS Once the system is in SOS status and the keypad is activated, the status
6
Care & Maintenance FAQ Usage Notices The keypad should be connected to control panel before use.
The keypad is compatible for most of our alarm system, contact the distributer for more detail. Please make sure the battery has been installed in the keypad before use.
produces heat or electric-magnetic. Take the keypad for disposal of recycling according to the local regulation. Do not take apart the product if you are not a professional technician. Maintenance
FCC Statement
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
-- Reorient or relocate the receiving antenna.
-
ference that may cause undesired operation.
operate the equipment. Problem Cause Solution
No response from keypad
the battery.If the problem is not solved, please contact the distributer for more help. Wearing Gloves Take off the glove and try pressing the keypad again. Keypad cant be paired with the system No response from the alarm system.
try using Learn Mode to see if theres any error in the QR code.
installed can be covered by the RF signal sent from the alarm system. You can use a paired remote controller to test. Cant disarm by the RFID tag. The RFID tag hasnt paired
system.
mode. Wave in front of the keypad to activate it.
[Arm]
[Disarm]
[Home Arm]
error
Please input the right code. Users can modify the
PIN 8