Quick Start Guide Harmony K140A1 Connect Listen Welcome!
Thank you for choosing Mood Media to provide your audio/visual experience!
WHATS IN THE BOX?
ProFusion | MVision The Harmony a/v player Remote control (ProFusion or MVision version) External power adapter for the Harmony Ethernet cable (and HDMI cable, if applicable) 3.5mm TRRS to RCA audio cable Window appliqu This Quick Start Guide and other important information about your Harmony device. WHAT YOU WILL NEED A working visual display and/or speaker system An open/active broadband internet connection (Ethernet or WiFi) Optional: If you wish to access the Harmonys local user control page, a computer, phone or tablet with an Internet browser and network access will be necessary Need Help? Call 800.345.5000 or visit moodmedia.com 2 Harmony A QUICK LOOK AT THE FRONT Power, Ethernet and Play Status Lights THE BACK USB Ports Remote Control Sensor Audio Outputs Digital | Analog Power Adapter Input Ethernet Port Digital | Analog Video Outputs NOTE: Your Harmony device may be configured for music only. A video display is not necessary to complete an audio only installation. Please see the full Harmony User Guide in the Client Support Hub at moodmedia.com for more detailed operating information. 3 Harmony Quick Start Guide CAUTION: Certain parts may cause electrical shock or injury. IMPORTANT: Please note these important operational instructions and clarifications. Connect your Harmony device Adjust the volume on your display or speaker system down Please refer to the Regulatory and Safety information sheet included with your Harmony device before proceeding. completely (off). Then power off your system and old music player. Youll be prompted to increase the volume in step . Disconnect the power and remove all cables from the old player. Remove the old player and its power supply. Place your Harmony device in a manner that is consistent with the safety instructions and that allows adequate ventilation space. B C A Connect the cables in this order:
A: The 3.5mm a/v plug to the Harmony A/V jack, then the color coded (red and white) RCA connectors to the corresponding audio zone(s) for your speaker/visual system. (note: yellow is for Composite video). B: The Ethernet cable to your Harmony and to your available Ethernet port then, if applicable, the HDMI cable to your Harmony device and to your display. C: The 5.5mm plug of the external power adapter (use only the power adapter provided with your Harmony device). Need Help? Call 800.345.5000 or visit moodmedia.com 4 Plug the external power adapter into an always on wall outlet. Your Harmony device will now boot-up and if scheduled, will automatically begin content playback. No further action should be required. If you need to access the local user control page, please refer to the full User Guide available online in the Client Support Hub at moodmedia.com or call us at 1.800.345.5000. NOTE: If a circuit breaker, wall switch or a timer controls the outlet you are using please ensure it is always on. Improperly shutting down electronic devices can cause premature failure. Turn on your visual display or speaker system and increase the master volume in small increments until you reach your desired listening level. Please note that you may need to adjust your display or speaker volume to match the level you are accustomed to. Due to normal differences between any previous music player and your new Harmony device you may need to try different volume settings. The volume on your Harmony device is set to 100% from the factory, so adjust your display and/or speaker system volumes slowly and carefully. Congratulations! You should now be enjoying your content selections on your Harmony device!
Please refer to the full online User Guide for more detailed operating instructions. If you have any questions or comments, please call us toll-
free at 800.345.5000 or visit our Client Support Hub at moodmedia.com 5 Harmony Quick Start Guide Status Lights Power Status:
Red = Power is available, but the Harmony device is off. Green = The Harmony Device is on and active. Ethernet Status:
Yellow = no Ethernet or WiFi connection. Green = a valid Ethernet or WiFi connection is established. Playback Status:
Red = Content is not playing. Green = content is playing. NOTE: For a more detailed description about how Harmony can tell you about its status by using these lights, please refer to the full online User Guide for more detailed operating instructions. If you have any questions or comments, please call us toll-free at 800.345.5000 or visit our Client Support Hub at moodmedia.com Reset button On the back of the Harmony device, there is a small opening to access the reset button. This button should only be accessed upon the advice of a Mood representative. Need Help? Call 800.345.5000 or visit moodmedia.com 6 CAUTION - READ ME RISK OF ELECTRIC SHOCK! DO NOT OPEN!
ATTENTION: RISQUE DE CHOC LECTRIQUE - NE PAS OUVRIR!
NO USER SERVICEABLE PARTS INSIDE!
AU CUNE PICE INTERNE RPARABLEPAR LUTILISAT EUR!
This symbol is intended to inform users that certain parts may cause electrical shock and injury. Ce symbole est destin informer les utilisateurs que les pieces internes peuvent provoquer un choc lectrique et des blessures. This symbol is intended to inform users of important operational instructions and clarifications. Ce symbole est destin informer les utilisateurs dimportantes instructions et clarifications oprationnelles. ATTENTION!
RISK OF ELECTRIC SHOCK! DO NOT OPEN!
ATTENTION: RISQUE DE CHOC LECTRIQUE - NE PAS OUVRIR!
NO USER SERVICEABLE PARTS INSIDE!
AU CUNE PICE INTERNE RPARABLEPAR LUTILISAT EUR!
This product was tested by an independent Nationally Recognized Testing Laboratory (NRTL). Please refer to the Safety Agency Listings for more detail. Changes or modifications not expressly approved by the party responsible for compliance will void the users authority to operate the equipment. Unauthorized modifications place users at risk of injury to their person and/or damage to property. Page 1 Harmony - MAVPSG1 - Model K140 (A1;A2;L1;L2) Regulatory and Safety Sheet WARNING!
To reduce the risk of fire, electric shock, or injury:
Pour rduire le risque dincendies, de chocs lectriques ou de blessures:
Do not use the Harmony device if it has been exposed to water. Nutilisez pas le Harmony sil a t expos leau. Do not use the Harmony device if it has been dropped or damaged. Nutilisez pas le Harmony sil a chut et a t endommag. Do not use the Harmony device with a damaged power cord. Nutilisez pas le Harmony avec un cordon dalimentation endommag. Do not unplug power or audio connections by pulling on the cables. Ne dbranchez pas en tirant sur le cordon. Do not restrict airflow by blocking or covering ventilation openings in the chassis cover or insert objects into chassis ventilation openings. Ne limitez pas le flux dair en direction du botier en bloquant ou en insrant des objets dans ses orifices de ventilation. Do not use in environments with excessive heat, humidity, dust, or magnetic fields. Nutilisez pas dans des environnements en proie une chaleur excessive, lhumidit, aux champs magntiques ou la poussire. Place the Harmony device only on a stable surface of sufficient size and strength where it will not be exposed to excessive vibration. Placez le Harmony uniquement sur une surface stable de dimension et de force suffisantes o il ne sera pas expos des vibrations excessives. Do not overload power outlets. Ne surchargez pas les prises dalimentation. Route all cables safely. Do not place any items on or against the cables. A cheminez tous les cbles en toute scurit. Ne placez pas dobjets sur ou contre les cables. Do not allow children to operate without supervision. Ne laissez pas les enfants utiliser lappareil sans surveillance. Use only attachments that are approved by Mood Media Corporation. Utilisez uniquement des pices approuves par DMX, LLC. Page 2 Harmony - MAVPSG1 - Model K140 (A1;A2;L1;L2) Regulatory and Safety Sheet NOTE-1: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE-2: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protections against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case users will be required to correct the interference at their own expense. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Safety Agency Listings This product was tested and was found to be fully compliant with international product safety and electromagnetic standards using the hazards based approaches introduced by the recently implemented IEC-62368-1:2018 Standard and its international derivatives. This product was tested and found to be fully compliant with; FCC Part 15, Subpart B / Class A; CE-RED; cETLus with ETL CB Scheme;
CCC;RoHS 2.0 and WEEE requirements Contact Mood Worldwide Customer Support Centers United States: +1 800 345 5000 Africa: + 27 11 780 3000 Brazil: + 55.11. 3457.0654 Canada: +1 800 350 0369 or on the web at moodmedia.com Mood Media 2019. All rights reserved. DMX, LLC is a Mood Media company. All other trademarks and logos are the property of their respective owners. Page 3 Harmony - MAVPSG1 - Model K140 (A1;A2;L1;L2) Regulatory and Safety Sheet