FCC ID: 2ATJ2-H2203 True Wireless Earbuds

FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. ISED Statement English:This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). French: Cet appareil contient des metteurs/rcepteurs exempts de licence qui sont conformes aux RSS exempts de licence d'Innovation, Sciences et Dveloppement conomique Canada. L'exploitation est soumise aux deux conditions suivantes :

(1) Cet appareil ne doit pas provoquer d'interfrences.

(2) Cet appareil doit accepter toute interfrence, y compris les interfrences susceptibles de provoquer un fonctionnement indsirable de l'appareil. l'appareil numrique du ciem conforme canadien peut - 3 (b) / nmb - 3 (b). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. cet appareil est conforme l'exemption des limites d'valuation courante dans la section 2.5 du cnr - 102 et conformit avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des donnes canadiennes sur l'exposition aux champs rf et la conformit. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. Cet quipement est conforme aux limites d'exposition aux rayonnements du Canada tablies pour un environnement non contrl. RF Exposure Statement The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with minimum distance 0mm between the radiator & your body. L'appareil a t valu pour rpondre aux exigences gnrales d'exposition aux RF. Cet quipement doit tre install et utilis avec une distance minimale de 0 mm entre le radiateur et votre corps.

Blieltisla sygde! ao! a Q1lo 2lo 3

SPSIMEE NSE ae ell oe acolo) | You el ae alt 6 ob oz 1 P ania } o% of ow OG ap a, Stall latadasan eft hth ial erie iui 102\0 310 410 51IQ 60 7Io silo 9104 wae ab sos al

Antenna Report Antenna plate Internal Antenna Market name/Model name WAN3216F245H08 Manufacture Antenna Max. Gain Frequency Range VSWR Wan Cheng 2.56dBi 2400.0-2480.0MHz 3.2046 Antenna: Size: 7.4mm x 3.2mm 3.2mm 7.4mm 1.Gain and Efficiency 2.VSWR Frequnce: VSWR 2.402Ghz 2.2510 2.441Ghz 2.6813 2.480Ghz 3.2046 Input impedance:

3.Radiation Pattern 3.Return Loss:

4.Theta:

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2022-8-15>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2ATJ2-H2203 Model name H2203 For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title Company:

zhen rong Wang/Director DONG GUAN BINSHI ELECTRONIC TECHNOLOGY CO., LTD Address:

Phone:

Fax:

E-Mail:

Qi Langwei Industrial zone, Tangjiao Village, Chashan Town Dongguan China 0769-81805858 0769-82210476 binshi@bsbyz.com

DONG GUAN BINSHI ELECTRONIC TECHNOLOGY CO., LTD Qi Langwei Industrial zone, Tangjiao Village, Chashan Town Dongguan China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2022-8-15 To whom it may concern:

We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2ATJ2-H2203 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title Company:

zhen rong Wang/Director DONG GUAN BINSHI ELECTRONIC TECHNOLOGY CO., LTD Address:

Phone:

Fax:

E-Mail:

Qi Langwei Industrial zone, Tangjiao Village, Chashan Town Dongguan China 0769-81805858 0769-82210476 binshi@bsbyz.com