10 1 1 1 1. MICR 2. 10 3. GFSK 4. 3.0-4.2V 5. <2.5mA 6. <0.3mA 7. <40uA 8. 200mA 9. >100 10. <3<2 11. 800mA110mA 12. <5 <44 13. 3 14. 3.8*27*74mm30*23*23mm Bluetooth 3.0 Keyboard-10 Inch CAPS Caps lock CAPSCaps lockCAPS connect Charge Power 53.5VCharge Charge Fn Fn+QFn+WFn+EAndroidWindowsIOS MICRMICR USBUSB chargecharge 1.ON2-3 CONNECT 2.. 3. 4. 5.PINEnter 1. 2. 6. 15 3 1. 2. 3. 4. 5. 6. Keyboard Shortcuts Product Parameter FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 10-inch Bluetooth keyboard instruction manual Containsers guide1 Keyboard case 1 USB cable1 Press the "CONNECT" button on the keyboard, the Bluetooth connection indicator will flash, then the keyboard Bluetooth is activated and can be connected to the tablet. 2. Open and unlock your tablet and click on the tablet Settings icon. 3. In the Settings interface, select Bluetooth, enter the Bluetooth setting interface, click the Bluetooth switch and click Search Device. 4. The tablet will search for the activated Bluetooth device, find the wireless keyboard signal, and click on this item to connect. 5. Enter the PIN pairing code displayed on the screen on the keyboard and press Enter to connect. 6. After the pairing is completed, the status of the wireless keyboard will be displayed as Connected. 1. Standard MICR interface 2. Effective operation within 10 meters 3. Modulation method: GFSK 4. Working voltage: 3.0-4.2V 5. Working current <2.5mA 6. Standby current: <0.3mA 7. Sleep current: <40uA 8. Charging current 200mA 9. Standby time: >100 days (calculated by eight hours per day) 10. Charging time: backlight <3 hours, no backlight <2 hours 11. Lithium battery capacity: backlight 800mA, no backlight 110mA 12. Turn on the backlight for a sustainable working time: <5 hours, no backlighting, sustainable working hours: <44 hours. 13. Lithium battery life: 3 years 14. Lithium battery specifications: backlight 3.8*27*74mm, no backlight 30*23*23mm Getting started guide Keyboard device name:
Bluetooth 3.0 Keyboard-10 Inch The CAPS indicator is:
Keyboard input letter case light, in the state of successful connection with the tablet, press the Caps lock button on the keyboard, the CAPS indicator is displayed in blue, the input letters are uppercase, then press the Caps lock button, CAPS indicator Off, the letters entered are lowercase. The indicator light is the Bluetooth indicator:
When connecting the Bluetooth keyboard to the tablet, press the connect code button light to be blue. It will flash continuously until the Bluetooth keyboard is successfully connected to the tablet , and the Bluetooth indicator will automatically go out. The Charge ligth is the charging indicator:
The charging status is displayed in red. It will self-extinguish when fully charged. The Power ligth is the power indicator:
Turn on the Bluetooth switch to display in blue. It will automatically go out after 5 seconds . When the voltage is lower than 3.5V, the "Charge" indicator flashes blue until the Bluetooth keyboard stops working, and automatically turns off. Special function keys Blue Fn button with auxiliary function Fn+Q, Fn+W, Fn+E, switch to Android, Windows and IOS systems respectively. Charging When the battery is low, the power indicator will start flashing, which means it needs to charge. First step, get the charge line,put MICR plug (small head) into the MICR interface on the keyboard (note the direction) The second step is to connect the USB terminal to the power adapter or the USB interface of the computer. The third step, the connection is successful, the charging status charge will be red, and will automatically turned off when the power is full. Keyboard shortcuts 1. Turn the keyboard's power button to the "ON" position, the power indicator will light for 2-3 seconds, then go out. Notice 1. Using a long-lasting lithium polymer rechargeable battery, it can be used normally for several weeks ( can be charged at any time). 2. When not in use for a long time, we recommend turning off the power switch to prevent power from escaping to extend battery life. When the keyboard goes into sleep mode for 15 minutes without instructions, press any key and wait Energy-saving sleep mode for 3 seconds. The keyboard will start up. Troubleshooting 1. Make sure the power is turned on. 2. Make sure the keyboard is in operable range coverage. 3. Make sure the battery has electricity. 4. Make sure the setting of Bluetooth on tablet PC is turned on. 5. Make sure the wireless keyboard is connected with Bluetooth. 6. Make sure the wireless keyboard and Bluetooth have been Paired. Cleaning Clean the keyboard with clear water, alcohol or similar disinfectant;