FCC ID: 2A33JBYFR003 Wireless Charge

DongGuan BaiYou Electronic Co., Ltd INSTALLATION INSTRUCTIONS MODELBAYU-FR003 FCC ID :2A33JBYFR003 Electrical rating: input: 100V-240V/50-60Hz, 0.3A Max; output :5V 2.1A CAUTION:

Modifications which are not approved by the party responsible for compliance could void user's authority to operate the equipment WARNING: To reduce the risk of fire, electric shock, or injury to persons:

1. Use the unit for indoor only. 2. Do not use extension cord(s) to connect the unit. 3. Do not try to open the unit for any reason. 4. The power line should be replaced by manufacturer, service orginization or qualified staff, please do not connection personally CAUTION: Modifications which are not approved by the party responsible for compliance could void user's authority to operate the equipment. INSTALL:

1The power adapter should be used under AC 100V-240V.please check the Voltage before use it!

2Please use it in the secure environment, do not cut the cord . 3.For indoor use only. 4. Products commonly used on the furniture, such as the head of a bed, cabinet, sofa and so on, 5.before install ,please cut off one hole to built the wireless charging ,then please connect the power adapter with the wireless charing use the USB plug. 6.picture and drawing:

. FCC warning:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

50.0mm WIRELESS CHARGING MODEL: BAYU-FR003 FCC ID:2A33JBYFR003 Input: 100V-240V/50-60Hz,0.3A Max Output:5V 1.0A MADE IN CHINA 30.0 mm

C5266091_X10_Ed.2 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046

<COMPANY HEADER>

Date:2022-1-

10 Subject: Request for Confidentiality FCC ID: 2A33JBYFR003 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality No No No No No NOTE 1 NOTE 1 No No Short-Term Confidentiality NOTE 2 No No No No No No NOTE 1: Long-Term Confidentiality may be permitted under special conditions ( See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of _180_____ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. 1/1 C5266091_X10_Ed.2 Sincerely, Signature:

Name: cherry chen Title:

1/1

C5266091_X8_Ed.1 Letter of Authorization 2A33JBYFR003 Company: Dongguan Baiyou Electronic Co., Ltd. Address: 2F A Building, WuFeng Industrial Park, 21st JinTan Road, ShanWu ShiJie Town, DongGuan City, GuangDong Province, China. Product Name: Wireless Charge Model Number: BAYU-FR003 FCC Identifier:

We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Cherry chen Title: Manager Date: 2021.12.30 Signature of applicant:

1/1