FCC ID: 2A6T4-DL106 Keyboard case for iPad with Bluetooth

Friendly reminder: Before installing the iPad, open the support cover and place

(The keyboard power key is on the bo om right corner) First preset the channel, and then connect to Bluetooth ( Fn + A is channel 1,

(The product is a rainbow light backlit keyboard) the iPad in the case. 1 Bluetooth keyboard connec on method:

2 How to sawitch devices?

3 Backlight adjustment steps:

Keyboard Speci ca on:

5 How to use Keyboard shortcut Supported iOS Mul media Bu ons:

6 Touch control board opera ng instruc ons:

8 Charging and surge protec on:

When ba ery voltage is lower than 3.2V power indicator ashes. Charge the keyboard now Turn on the power switch on the right side of the keyboard to on, press and hold the bu on for 4-5 seconds, At this me, the Bluetooth indicator ashes, which means that the kehyboard enters the pairing state. Turn on the Bluetooth of the table and scan it, The table scans: Bluetooth Keyboard. Click Connect to show that the connec on has successful. The keyboard indicator is o . The keyboard has the func on of automa c sleep and automa c return connec on. A er a successful connec on, the keyboard is turned o and disconnected. You need to connect again. You only need to turn the keyboard on and o and push it to on, and then the tablet Bluetooth will connect automa cally when it is turned on. You dont need to press or click the paired Bluetooth to connect automa cally. If the operation is wrong or the connection in the paired device list is unsuccessful, the device can be ignored and re operated Please turn on Bluetooth---MY DEVICES---Bluetooth Keyboard---

click the right exclamation mark---forget this device---then turn off the keyboard and restart---search Bluetooth Keyboard again on the tablet---click Connect Fn + S is channel 2, Fn + D is channel 3). The opera on method is as follows:

For the rst me on the keyboard, press the key, a er 4-5 seconds, the Bluetooth device is successfully connected, This device is considered as channel 1 by default. If you need to connect to the second device, you need to press Fn + S rst, then press , a er 4-5 seconds, the bluetooth light ashes, start to connect the second device, this device is channel 2;

If you need to connect the third device, you need to press Fn + D rst, then

, a er 4-5 seconds, the bluetooth light ashes, start connec ng the press third device, this device is channel 3;

When the three channels are successfully connceted, press Fn + A, S or D to swithch between the three devices(Channel switching wait me is 5-6 seconds). When the keyboard Bluetooth is only connected to one device, the default is that this device is channel 1. If you press Fn + S (channel 2) or Fn + D (channel 3) by mistake, at this me, the Bluetooth will be disconnected, just need Press Fn + A to switch to channel 1, wait for 5-6 seconds, Bluetooth will automa cally connect. If the keyboard Bluetooth has been connected to 3 devices, at this me, if you want to change the device of channel 3 to channel 1, you only need to press Fn + A (channel 1) rst, then press , a er 4-5 seconds, the bluetooth light ashes, Start connec ng the device, the original channel 3 device becomes channel 1 (the original channel 1 device, at this me, the Bluetooth has been disconnected, if you need to connect, you need to reset the channel, and then connect to the Bluetooth) Turn on the power and successfully connect to the device. Click to swith to backlight mode, and click once for the ligh ng e cet to turn on the rainbow light backlit. Light brightness adjustment: Use the key to adjust the three brightness of the light, Click 3 mes in sequence, which is divided into three modes: weak, medium and strong, and click the four me to trun o the backlight. Light colors switch: Click the bu on to switch the rainbow light backlit color, a total of seven colors of rainbow light backlit, single click to switch one color. The breathing e ect switch: Use the combina on key Fn + to switch to the breathing e ect (automa cally switch colors), Use the combina on key Fn

again to trun o the breathing e ect. 4 How to use Smart Voice Shortcuts

(The product is equipped with voice recogni on shortcut keys) Press when you end the voice, just press twice in a row to enter the input voice mode and start the voice;

once. FCC Cau on This device complies with part 15 of the FCC Rules. Opera on is subject to the following two condi ons:

(1) This device may not cause harmful interference.

(2) this device must accept any interference received, including interference that may cause undesired opera on. Any Changes or modi ca ons not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec on against harmful interference in a residen al installa on. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc ons, may cause harmful interference to radio communica ons. However, there is no guarantee that interference will not occur in a par cular installa on. If this equipment does cause harmful interference to radio or television recep on, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separa on between the equipment and receiver.

-Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. FCC Radia on Exposure Statement This equipment complies with FCC radia on exposure limits set forth for an uncontrolled environ ment. This equipment should be installed and operated with minimum distance m between t he radiator & your body. Note:

1. If you do not use the keyboard for a long me, we suggest that you turn o keyboard to extend the ba ery life. 2. In order to get a longer ba ery life, it is recommended to charge the keyboard when the power light is ashing, and it is best to control the charging me each me, About three hours. Energy saving sleep mode:

When the keyboard has no opera on for 10 minutes, it will enter the sleep mode. When it needs to be used,just press any key and wait for 5 seconds, the keyboard will go into sleep mode start-up. Troubleshoo ng:

1. Make sure the power is on. 2. Make sure the keyboard is within the opera ng distance. 3. Make sure the ba ery is charged. 4. Make sure your tablets Bluetooth se ngs are on. 5. Make sure the wireless keyboard is on and Bluetooth is on. 6. Make sure the wireless keyboard and at Bluetooth are paired. The ba ery is low and the power indicator is ashing, which indicates that the keyboard needs to be charged 1. Connect the B end of USB cable to the keyboard end. 2. Connect the A end of USB to the power adapter or the USB interface of the Charge:

computer. Clean:

Clean the keyboard with water, alcohol or alcohol like disinfeatant. 9 Remarks:

7 Keyboard indicators:

10 XivoLz Promise:

If you find any damage or dissatisfaction after receiving the product, you are welcome to contact us as soon as possible, we will provide you with a 100% satisfactory solution.

Dongguan City Dongle Technology Co., Ltd. Agent Authorization Company: Dongguan City Dongle Technology Co., Ltd. Address: No. 8, East Gate 2nd Alley, Qiaoli Zhangwu, Changping Town, Dongguan City, Guangdong Province, China Product Name: Keyboard case for iPad Model Number(s): 12.9inch, 11inch, 10.9inch, 10.5inch, 10.2inch Product Description: Keyboard case for iPad with Bluetooth We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2022/05/16 Name:

Wang Yao Title:

Manager Company: Dongguan City Dongle Technology Co., Ltd.

Dongguan City Dongle Technology Co., Ltd. Authorization Letter We,

(the approval holder) Company name Addresss declare that the following representative (agent):

Name (person) Bovey Yang Dongguan City Dongle Technology Co., Ltd. No. 8, East Gate 2nd Alley, Qiaoli Zhangwu, Changping Town, Dongguan City, Guangdong Province, China Company name Shenzhen STS Test Services Co., Ltd. Addresss 1/F., Building B, Zhuoke Science Park, No.190, Chongqing Road, Fuyong Street, Baoan District, Shenzhen, Guangdong,China City Shenzhen China Country to act on our behalf on all matters concerning the application and documents submitted to Micom Labs for product certification below Product Description Keyboard case for iPad Type or Model(s) 12.9inch, 11inch, 10.9inch, 10.5inch, 10.2inch Tradename or Brand(s) XivoLz 2A6T4-DL106 Date:

Name:

(this must be a person) Function:

Signature:

(or official company stamp) China 2022.05.16 Wang Yao Manager FCC ID Attestation:

City:

Differences Description We Dongguan City Dongle Technology Co., Ltd. state:

Product Keyboard case for iPad Model Name 12.9inch, 11inch, 10.9inch, 10.5inch, 10.2inch Brand Name XivoLz FCC ID 2A6T4-DL106 Both of models have the same circuit schematic, construction, PCB Lavout and critical components. Different models, different appearance and size Sincerely, Company: Dongguan City Dongle Technology Co., Ltd. Title: Manager E-mail: 121146965@qq.com Name: Wang Yao Signature

Dongguan City Dongle Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022.05.16 FCC ID: 2A6T4-DL106 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Wang Yao Title: Manager