FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio installed and used in accordance with the frequency energy and, instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
if not Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. FCC WARNING:
To assure continued operation, follow the attached installation instructions and use only shield cables when connecting to other devices. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2 Main Unit:
1 LOCATION OF CONTROL 14 15 2 IR 3 4 5 6 7 8 9 10 11 13 12 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. MIC (Microphone) Volume Control Knob Power On-Off/Volume Control Knob AUX (In) Jack MIC IN ( Microphone In) Jack MODE Button REP/ (Repeat/Light On-Off) Button Button Button Button USB Port TF (Micro SD Card) Slot USB 5V (Micro USB) Port (For charging only) Indicators LED Display Remote Sensor Remote Control:
1. (Standby) Button 2. VOL+ (Volume Up) Button 3. MODE Button 4. Button 5. Button 6. Button 7. VOL- (Volume Down) Button 8. RepeatButton 9. Numeric Buttons 4 3 1 2 3 VOL+
MODE 0 1 4 7 VOL-
2 5 8 3 6 9 5 7 6 8 9 POWER SOURCE:
Main Unit:
The unit has a built-in Li-ion rechargeable battery, charge it before first time use or when it is drained (or the red indicator appears on the display and blink) as follows:
1. Connect the small plug from the supplied USB Connection Cable to the USB 5V
(Micro USB) Port on the front of unit. 2. Connect the full size USB Plug from the supplied USB Connection Cable to the USB Port on the Personal Computer or USB Charger (Computer and USB Charger not included). 3. When charging, the Red Indicator on the front of unit will illuminate. When charging is complete, it will turn off. To USB 5V (Micro USB) Port MODE REP/LIGHT USB Connection Cable To USB Port on PC or USB Charger Main Unit PC NOTES:
1. When charging, you can also play and listening music at the same time. 2. Your battery will last longer if you following these simple guidelines for caring and storing:
A. Before first time use, recharge the unit approximately 12 hours until the unit is fully charged. B. Charge and store the unit within the temperature range of 5C - 35C (40F - 95F). C. Do not overcharge (longer than 24 hours). Excessive charging or running the unit until completely flat will damage battery. Battery life will be extended if you keep the battery fully charged. D. Battery life naturally shortens slowly over time. E. The rechargeable battery incorporated in this product is not user replaceable. 4 Remote Control:
1. For first time use, remove and discard the insulation film as illustrated below:
47 1 0 8 5 2 V O L
-
9 6 3 V O L
+
M O D E 2. Replacing the button cell when it is drained as follows:
Push and slide out the button cell as shown below. Replace the button cell with new CR2025 button cell with the polarity markings on the rear of the Remote Control. Close the button cell holder. BATTERY PRECAUTIONS:
Follow these Battery Precaution when using a battery in this device:
1. Use only the size and type of battery specified. 2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment. A reversed battery may cause damage to the device. 3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones. 4. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. 5. Do not try to recharge the battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturers instructions.) 6. Do not dispose of battery in fire. Battery may explodes or leak. 7. Clean the battery contacts and also those of the device prior to battery installation. 8. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burn in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. 5 EFFECTIVE DISTANCE OF REMOTE CONTROL IR
>45 15 Feet
> 4 5 1. When there is an obstacle between the unit and the transmitter, the transmitter may not operate. 2. When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong shines on the remote control of the unit, the remote operation may be unstable. OPERATION:
General Operation:
1. Recharge the built-in Li-ion battery as previously instructed. 2. Turn the Power On-Off/Volume Control Knob on the front of unit clockwise to power on the unit. The LED Display will illuminate. 3. Press the MODE Button on the unit or Remote Control repeatedly to switch to desired playback mode. The unit will illuminate the indicators and a sound will prompt you with a selection (see list below):
Playback Modes:
Voice Prompt:
Indicators:
BT (Bluetooth) Bluetooth ready for connection USB USB TF (Micro SD) Card FM Radio Memory Card Radio AUX (In) AUX In 6 bLUE will appear on the display
(and blink) Indicator U/TF on display will illuminate Indicator U/TF on display will illuminate Radio frequency 875 - 1080
(87.5-108.0 MHz) will appear on the display AUX will appear on the display Note:
If the Audio Connection Cable; Micro SD Card and/or USB Device had NOT inserted into the unit, the correspondence selection will not be available. 4. During playback:
Turn the Power On-Off/Volume Control Knob on the unit (Or, press the VOL (Volume) +/-
buttons on the Remote Control) to adjust the volume level as desired. Press the Button on the unit or Remote Control to pause; press again to resume to normal playback.
(In AUX mode, press it to mute the sound, press again to turn the sound back on .) In BT, USB, TF (Micro USB) Card playback modes, press the or buttons on the unit or Remote Control repeatedly to skip tracks. Press REP/ Button twice to turn off the Decorative Lights, press twice again to turn it on. In USB, TF (Micro USB) Card playback modes, press the REP/ Button on the unit or Button on the Remote Control to set or reset the repeat mode as the list below. To cancel the repeat playback mode, turn the Power On-Off/Volume Control Knob on the unit counterclockwise until Click sound is heard to shut off the unit. Repeat Modes:
Repeat one Repeat folder Showing on LED Display:
+ OnE FoLd Random playback Repeat All rAn ALL Function:
Correct track will be playback repeatedly All the tracks in the same folder will be playback repeatedly All tracks will be playback randomly All the tracks will be playback repeatedly 5. When finished listening, press the Button on the Remote Control to turn the unit to Standby mode. Press again to turn on the unit on from Standby mode. 6. Or, turn the Power On-Off/Volume Control Knob on the unit counterclockwise until Click sound is heard to shut off the unit. NOTE: Remote Control will not functioning in power off mode. Turn the Power On-Off/Volume Control Knob on the front of unit clockwise to power on the unit before use Remote Control. 7 BT Mode:
BT (Bluetooth) pairing:
For first time use or re-pairing the unit to a new BT Device, pair as follows:
1. Power on the unit and enter to BT mode as previously instructed. You will hear an audible prompt say Bluetooth ready for connection and indicator bLUE will appear on the display and blink. 2. Power on the external BT Device and enter to BT searching mode. Start pairing following the on screen instructions from the external BT Device. When paired, the unit will sound a prompt Bluetooth connected and indicator bLUE on display will stop blinking. 3. If pairing is complete you may now play music with your external BT Device. Notes:
When the external BT Device searched the unit, our model number MMA3778 will appear on the display of external BT Device. If while pairing you are asked for a code please try "0000" or "1234". Normal operation after pairing:
1. Power on the external BT Device and enter to BT playback mode. 2. Power on the unit and enter to BT mode as previously instructed. You will hear an audible prompt say Bluetooth ready for connection and indicator bLUE will appear on the display and blink. 3. Wait a few seconds until the unit is automatically paired to the external BT Device. When paired, the unit will sound a prompt Bluetooth connected and indicator bLUE on display will stop blinking. 4. After pairing is complete you may now play music with your external BT Device. USB:
To play the music in external USB Device:
1. In power off mode, connect the USB Device into the USB Port on the front of unit as illustrated below:
MODE REP/LIGHT 2. Power on the unit and enter to USB mode as previously instructed:
You will hear an audible prompt say USB. Indicator U/TF on display will illuminate. Music on USB Device will be automatically played back. 3. During playback:
Turn the Power On-Off/Volume Control Knob on the unit (Or, press the VOL
(Volume) +/- buttons on the Remote Control) to adjust the volume level as desired. Press the Button on the unit or Remote Control to pause; press again to resume to normal playback. Press the or buttons on the unit or Remote Control repeatedly to skip tracks. Or, press the numeric buttons on the Remote Control to enter the track number of the desired track to play it directly. 8 TF (Micro SD Card):
To play the music in TF (Micro SD) Card:
1. In power off mode, insert the TF (Micro SD) Card (not included) into the TF (Micro SD) Card Slot on the front of unit with contacts facing down as illustrated below:
MODE REP/LIGHT 2. Power on the unit and enter to TF (Micro SD) Card playback mode as previously instructed:
You will hear an audible prompt say Memory Card. Indicator U/TF on display will illuminate. Music on TF (Micro USB) Card will be automatically played back. 3. During playback:
Turn the Power On-Off/Volume Control Knob on the unit (Or, press the VOL
(Volume) +/- buttons on the Remote Control) to adjust the volume level as desired. Press the Button on the unit or Remote Control to pause; press again to resume to normal playback. Press the or buttons on the unit or Remote Control repeatedly to skip tracks. Or, press the numeric buttons on the Remote control to enter the track number of the desired track to play it directly. Notes:
Up to 32 GB TF (Micro SD) Card /USB Device the unit supports to play. When inserting the TF (Micro SD) Card /USB Device, make sure the direction you selected is correct. Never insert violently to avoid damaging the TF (Micro SD) Card /USB Device or the unit. If it doesnt work, please check if the direction is correct. Before replacing TF (Micro SD)/USB Device, make sure the unit has been powered off. You also need to download the desired music in MP3 format into the TF (Micro SD) Card
/USB Device before insert into the unit. AUX IN:
To listen from an external Audio Player such as MP3 Player, Discman etc. 1. In power off mode, connect one end of supplied Audio Connection Cable to the AUX Out/
Line Out/Phone Jack on the external Audio Player. 2. Connect the other end to the AUX IN Jack on the front of unit as illustrated below:
MODE REP/LIGHT 9 3. Power on the unit and enter to AUX IN mode as previously instructed:
You will hear an audible prompt say Aux in. AUX will appear on the display. 4. Play the music on the connected Player as usual. (Make sure the volume level of the connected Audio Player is turned to high level.) 5. During playback:
Turn the Power On-Off/Volume Control Knob on the unit (Or, press the VOL (Volume) +/-
buttons on the Remote Control) to adjust the volume level as desired. FM RADIO:
To listen FM Radio:
1. Power on the unit and enter to AUX IN mode as previously instructed:
You will hear an audible prompt say Radio. FM radio frequency 875-1080 (87.5-108.0 MHz) will appear on the display. 2. To store the available FM stations into the unit (up to 30 stations) at first time use (or relocate the unit to a new location):
Press and hold the Button on the unit or Remote Control approximately 2 seconds until FM frequency on the display will start running. Wait a few minutes, the unit will automatically store all the available FM stations into the memory then playback the first station. Press the or buttons on the unit or Remote Control repeatedly to select and play the stored FM station as desired. If you know the frequency of desired FM station, you can use the numeric buttons on the Remote Control to enter the frequency then play it direct. For example, if you want received FM station 106.5 MHz. You can press the numeric buttons on the Remote Control 1 + 0 + 6 + 0. Antennas:
This unit has a built-in FM antenna which provides adequate reception. If reception is weak, reassemble the other direction/location of the unit to improve the reception. MICROPHONE:
To sing along with the music playing:
1. Connect the plug from Microphone (not included) to the MIC IN Jack on the front of unit as illustrated below:
Mic connection 6.35mm MODE REP/LIGHT 2. Power on the unit and play the music as usual. 3. Speak or sing into the microphone. 4. Turn the Power On-Off/Volume Control Knob to adjust the sound level of microphone and music. Note:
If feedback noise (high audio frequency noise) is hearing from the speaker, turn the Power On-Off/Volume Control Knob counterclockwise to reduce the microphone/music level or moving the Microphone away From the speaker. 10 OPERATION:
Check the following before requesting service:
SYMPTOM Cant power on POSSIBLE CAUSE Built-in battery drained The unit in power off mode No sound or sound weak Volume of the unit was set to minimum position Volume level of paired/connected device is in low level Volume level too high Sound distortion AUX (In) BT not functioning POSSIBLE SOLUTION Recharge the battery as page 4 Turn the Power On-Off/Volume Control Knob to power on the unit Increase the volume level by turn the Power On-Off/Volume Control Knob clockwise Rise the volume level of the paired/
connected device Reduce the volume level by turn the Power On-Off/Volume Control Knob counterclockwise Volume level of the paired/connected device too high Reduce the volume level of the paired/
connected device The external BT device had NOT paired to the unit Pair the external BT device to the unit as page 8 AUX (In) The external BT device too far from the unit Place the external BT device close to the unit GENERAL SPECIFICATIONS:
Power Source: Built-in DC 3.7V, 2400mAh (8.88WH) rechargeable Li-ion Battery; recharge by DC 5V through the USB 5V (Micro USBPort Impedance of Speakers:
Audio Power:
BT Version:
BT Operation Distance:
15W; 3 5W (RMS) 4.2 Up to 32 Feet in open area PACKAGE INCLUDES:
1 x Owners Manual 1 x Remote Control (Uses 1 x CR2025 button cell, included) 1 x Connection Cable (For Charging Only) 1 x Audio Connection Cable with 3.5 mm Stereo Plugs SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE 11