X6P Bluetooth Sports Headset USER MANUAL Security Precautions In order to have a proper and safe use of the headset, please read this user manual in detail and save it. Overview of Headset Overview of BTE05 Bluetooth stereo headset:
Be aware of the following guidelines when using your headset:
1. You should adjust the volume carefully when using the headset to prevent hearing damage. 2. Please stop using the headset in potentially hazardous situations to ensure your safety. 3. Please avoid using the headset to listen to music, make or receive calls which may cause a distraction while driving. 4. Put this product and its accessories somewhere out of the reach of children, to avoid a fatal danger caused by inappropriate use. 5. You should keep water from entering the headset, which may cause damage to the sound quality or the headset. 6. You should avoid turning the volume so high that you cant hear anything around you. If you feel a tinnitus or the volume is too high, please reduce the volume. 7. Stop using the headset if you feel obvious discomfort, irritation or have other adverse reactions. 8. The headset should not be stored or used at temperatures below -15 (5 F) or above 55 (131 F) which may shorten headset or battery life USB Microphone Vol(+) Next Track Light MF button Vol(-) Previous Track Charger and battery 1. Before charging, make sure the headset has been switched off. 2. Plug USB cable into the charging port of headset;
plug the other side of USB cable into the USB charger or other charging device. Charging will start and the red light remains bright on the headset. 3. Charging time of headset takes approximately up to 1.5-2hours, the red light will turn to blue when fully charged. Overview of Headset Warning: You must use the original cable to charge the Bluetooth headset, otherwise it may damage the headset. Thus, voltage of charger must be 5V, electric current exceed 100mA . This headset uses a non-detachable built-in rechargeable battery, in order to prevent damage to the headset, please do not remove the battery. Power on:
Keep pressing the MF button until blue light blinks. Pairing Mode:
Keep pressing the MF button until blue and red lights blink alternatively Switch off:
Keep pressing the MF button until red light blinks and goes out. Pair your headset with your cell phone 1. Keep the distance between the headset and cell phone (or other devices being connected) within 1 meter. The closer the better. 2. Keep pressing the MF button until the blue and red lights blink alternatively. 3. Initiate Bluetooth function of cell phone (or other device being connected). Then X6P will be shown on your phone. 4. SelectX6P (some cell phones need you to input the PIN 0000 as password) and the headset will automatically connect with your cell phone, the blue light begins to blink. Attention: Generally, there is 120 seconds maximum to pair the headset with your cell phone, or the Bluetooth pairing mode will stop when the lights goes out. Please retry steps 1 to 4 to pair again if your operation doesnt work. 2 3 4 Overview of Headset FAQ To disconnect the headset with your cell phone:
Turn off the Bluetooth function of your cell phone. Or keep pressing the MF button until the red light goes out, to switch off the headset. Or take the headset from the cell phone to more than 10m (30ftaway To reconnect the paired headset with your mobile phone:
1. Keep the distance of the headset and cell phone (or other devices being connected) within 1 meter. The closer the better. 2. Switch on the headset, and the headset will enter into reconnection mode when the blue light blinks. 3. Switch on the Bluetooth search function in your cell phone or other devices being connected. Then the headset will automatically reconnect with the mobile phone which has connected last time Answer incoming call:
When there is an incoming call, press the MF button once to answer the call, or use your cell phone to answer it. Reject a call:
When there is an incoming call, double click MF button to rejeck call, or use your cell phone to reject the call. Hang up a call:
Press the MF button once or use your cell phone to hang up your call. Last call redialling:
In standby mode, double-click the MF button to redial your last call. Music Play/Pause:
Press MF button once to play/pause music. Volume adjustment/Music selection:
Press Vol(+) and Vol(-) once to adjust volume; keep pressing the Vol(+) and Vol(-) to select previous track or next track. FAQ 1.X6P Headset cannot pair with Cell phone?
Ans: Please check whether your headset is in pairing mode or reconnection mode and check whether the Bluetooth function in your cell phone is on. Now check your devices Bluetooth menu and delete/forget the headset and reconnect the headset again as before. 2.X6P headset cannot be switched on?
Ans: Please check the battery status of your headset. 3.Can I change the battery for the headset?
Ans: No, this headset use a built-in non-detachable Li-Polymer battery, it cannot be removed. 4.Can I use headset while driving?
Ans: For safety reason, we strongly recommend not to use over-ear headset to avoid distraction while driving. 5.X6P Headset has disconnected with your cell phone within 10 meters?
Ans: Please check if there is metal or other material within a relatively close range which may interfere with the Bluetooth connection. Bluetooth is a radio technology which is sensitive to objects between the headset and the connected device. 6. I cannot hear a sound from your computer or cell phone?
Ans: Please check whether the output channel of your computer is Bluetooth, that the Audio Device and Bluetooth function of your computer support A2DP profile. And please check that the volume on your headset/computer/cell phone is turned up. 7. I cannot use the headset to control the volume, to select a track or APP of my cell phone?
Ans: The Software settings of the APP may vary and lead to some functions of the APP not controlable by the headset. Specification Specification:
Bluetooth version: V4.1 Frequency range: 2.4GHz 2.48GHz Operating distance: up to 10M Standby time: up to 180hrs Talking/music-playing time: about 8-9 hours Charging time: about 2 hours Frequency response: 20-22kHz Operating Temperature:-10C~50C Technical, specifications are subject to change without notice, we apologize for any inconvenience. 5 6 7 FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE 2: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.