5B532BT User manual 5B532BT is a multi-function Bluetooth MP3, which can play MP3 with Bluetooth, sub drive and TF card, with microphone and LINE IN function. Safety precautions 1.Keep away from children. 2.Non-original factory accessories and accessories do not have warranty qualification. 3.Users cannot disassemble themselves. If there is any failure, please contact the supplier. 4.Charging must be done inflammable and explosive materials. 5.Avoid exposure to strong sunlight or high humidity. 6.Avoid falls, collisions, and excessive extrusion, otherwise you will suffer different degrees of damage. List of specifications in a well-ventilated environment, away from 1Size: 74.55 * 72.45 * 80.7mm 10Bluetooth version: Vesion 2.1 2Weight (g) : 116.0 plus or minus 10g 11 Bluetooth frequency band: 2.402 ~
2.480GHz 3Applicable voltage: DC 3.7 ~ 4.2v 12Bluetooth RANGE: >10M 4Charging voltage: DC 5V 13Amplifier type AB/D type mono channel 5Battery specification :50 30 40 400mA 14Audio format supported: MP3 6Loudspeaker specification: diameter 40mmm internal magnetic horn 15FM receive band: 87.5-108.0MHz 7Charging interface: DC power socket 16Playback time: 1 hour 8LINEIN interface: 3.5mm headphone stand 17Signal-to-noise ratio: 80db
- 1 -
9Audio frequency response: 100Hz - 20KHz Functional instructions 1 1Short press: , U disk/SD card playback modes: a song. Bluetooth mode: last song. Radio mode: last frequency 2Long press:
, U disk/SD card playback modes: the volume decline. Bluetooth mode: volume down. Voice mode: volume decreases 1Short press: , U disk/SD card playback modes: the next song. Bluetooth mode: next song. Radio mode: the next frequency point 3Long press:
, U disk/SD card playback modes: increasing volume. Bluetooth mode: volume up. Voice mode: volume up. 2 3 1Short press: , U disk/SD card playback modes: play/pause. Bluetooth mode: play/pause. Radio mode: search desk. 2Long press
- 2 -
Bluetooth/usb drive /TF card /LINE/radio state cyclic switching. 4MODE 1Short press: , play mode switch. 2Long press: , seven lights switch. Functional specifications 1Bluetooth mode 5B532BT has bluetooth function, and when the 5B532BT is turned on, it will automatically enter bluetooth mode. The digital display will display BLUE at this time. Also, when the bluetooth device is disconnected from the 5B532BT, the 5B532BT will make a prompt soundShort press or Choose the next and last song. 2U disk model 5B532BT has a USB2.0 interface that supports plug-and-play, plug-first. When the usb drive is inserted (with a prompt), MP3 data on the usb drive is read, and music is played automatically by 5B532BT. 3TF mode 5B532BT has a TF card holder that supports plug-and-play, backplug priority. When the TF card is inserted (with prompt tone), MP3 data on the TF card will be read, and music will be played automatically by 5B532BT. 4LINEIN mode The 5B532BT has a 3.5mm earphone audio interface. Press the MODE button to switch to LINE IN MODE when the LINE IN LINE is inserted.
- 3 -
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- 4 -