FCC ID: 2AWOBJR1602 Remote Controler

JR1602FCC Remote Control Manual

(1). Supply Voltage---DC 3.0V , Battery 2*1.5V AAA (not included)

(2). Frequency 2.407GHz-2.473GHz (Peak output power: 5dBm)

(3). Instructions Forward Speed Back Brake Right Left Speed display a. First time use need to match code, this product has memory function Replace battery is unnecessary match code b. Hold down & keys for 3 seconds start match code, The first LED flicker c. Turn on the car body power nowThe first LED lit up, Match code Success d. Remoter 10 seconds not run will be standby ,Press any key wake up e. Keys caption Forward, Back, Left, Right, S Speed, P Brake. Press S key set up speed , 1 led lit up is low speed2 leds lit up is medium speed 3 leds lit up is high speed, Back a car is only low speed Press P key hold the brake, All LED flicker The remote controller only can be used with adult's guidance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC ID LABELING AND LOCATION FCC ID Label Remote Controler FCC ID: 2AWOBJR1602 FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

DONGGUAN HOGNYUANWEI TECHNOLOGY CO.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC ID: 2AWOBJR1602 To Whom It May Concern, C5266091_X10_Ed.1 Date: 2020.06.24 Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits ID Label/Location Attestation Statement External Photos Block Diagram Schematics Test Report Test Setup Photos Users Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) SDR Software / Security Info Long-Term Confidentiality Short-Term Confidentiality No No No No No No No No No No No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Name: zhang shuyan Date: 2020.06.24 Sincerely, Title: manager Signature of applicant:

1/1

C5266091_X8_Ed.1 Letter of Authorization DONGGUAN HOGNYUANWEI TECHNOLOGY CO.,LTD Company: DONGGUAN HOGNYUANWEI TECHNOLOGY CO.,LTD Address: 155 East Central Road, Xiansha Second Industrial Zone, GaoBu Town, Dongguan City, Guangdong Province Product Name: Remote Controler Model Number: JR1602FCC FCC Identifier: 2AWOBJR1602 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: zhang shuyan Date: 2020.06.24 Title: manager Signature of applicant:

1/1