Light up Wireless Optical Mouse Instruction Manual 7142-24BK c. 4. a. b. c. 2. a. b. c. 3. a.
*
Features:
Scroll Wheel 1. Back Button 2. Forward Button 3. DPI Button 4. Micro-USB Input port 5. ON/OFF Switch 6. Optical Sensor 7. USB Wireless Receiver 8. Input voltageDC5V 9. 10. Input current300mA Whats included:
1 x Light up Wireless Optical Mouse 1 x USB Wireless Reciever 1 x Instruction Manual 1 x Micro-USB charging cable Interface: USB 1.1/2.0 Operating System: Windows 98/ME/2000/
XP/VISTA//Win7/Win8/Win10/Mac Instructions:
1. a. b. Charging the Wireless Mouse:
Charge the mouse fully before usage. Connect the provided charging cable to a power source and to the Micro USB port (5) on the mouse. Once connected the LED Indicator will begin to glow red when charging, once fully charged LED will turn OFF. Turning OFF / ON / Light up Function:
Turn ON the mouse by moving the ON/OFF switch to the middle position. Move to the far right position to turn ON the mouse with light up function. Move to the far left to turn OFF the mouse. Wireless Reciever Installation Remove USB Receiver from the USB Reciever Port underneath the mouse. Once removed, take USB Receiver and insert into the USB port of the notebook or PC. Computer will identify the reciever automatically, Wireless mouse will begin installation instructions. Once fully installed mouse will be ready for uses.
*Note: If using a desktop PC, the distance from workspace to computer could cause connection issues to the receiver. Suggestion would be to use a extended USB Cable DPI Button Function Press the DPI Button to switch between 800 - 1200 - 1600 DPI. DPI Function enables you to adjust the mouse sensitivity to a faster or slower Attention:
1. Auto-sleeping and power sleeping fuction, device will automatically sleep if inactive for a set amount of time and will reactivate once any key is pressed. Optical mouse could have operating issues 2.
*
For the best operation, please use a mouse pad. SAFETY PRECAUTIONS:
1. 2. 3. 4. 5. 6. 7. 8. WARNINGWhen using this product, basic precautions should always be followed, including the following:
Read all the instructions before using the product. Do not expose the device to moisture. Do not use the device in excess of its output rating. Overload outputs above Do not use the device if damaged or explosion or risk of injury. Do not disassemble the device. Take it to or repair is required. Incorrect reassembly or temperatures above 212F may cause explosion. repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
(1)
(2) FCC Warning Statement:
*
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. MADE IN CHINA