FCC ID: 2AFSGM3 Product Name:Bluetooth Speaker Model name:M3 Brand Name:AOMAIS Adapter Model:AOMAIS LIFE Audio Output:30W Size:11.93*3.74*2.99 inch Range:20m/66ft Weight:3.07 lb Input:5V/2A Bluetooth Version:V4.2 THD:1% Volume max Main Material:Bamboo Charging Time:3.5 hours Battery Capacity:5000mAh lithium battery Play Time:10 hours (50% Volume) LED1 Vol- Button Bluetooth Button LED2 Mode Switch Button Vol+ Button Power Button For the first time, the volume of the speakers defaults to 60% of the volume. After the first use the speaker will remember the volume used last time. LED Light is quick flashing (
Red) when low battery. LED Light is Red when charging. LED Light is turn off when full battery. Turn on the speaker and not connected with Bluetooth. The speaker will NOT turn off automatically. The speaker is connected with Bluetooth and not playing the music. The speaker will NOT turn off automatically. 1.Turn on the bluetooth of the speaker and the phone. 2.Search for Bluetooth Model AOMAIS LIFE from your device list then pair with your device. 3.The audible blue light will be on all the time when the pairing is successful. Please pay attention to protect the speakers horn. If you accidentally press the horn into the speaker, you can use a transparent tape to restore it to the original state. dont drop 66feet Bluetooth 50feet TWS 3 EQ modes: With unparalleled three EQ modes , three modes
(Classic, Party & Surround) enhance any music style and occasion. computer FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.