This radio station possesses the pattern of choosing the frequency and launching automatically. LE-906 launcher instruction booklet Operating frequency: 2.433GHz 2.481GHz Choosing the frequency automatically and pairing:
Long pressing on the AUTO key's of the launcher faceplate until the receivers signal light twinkles (twinkle shows that two radio stations have looked for frequency successfully namely they are mutual pair radio stations), the station has the memory function regarding this, if not eliminate the receive radio station's pair data, these two would be the pair radio stations perpetually. Long pressing on the AUTO key's of the receiver would eliminate the preserved pair data in the radio station, which could pair with other radio station again. Many launchers and receivers must have paired already when use (To separate other radio stations power sources and only to keep one pair), and then operates the next pair of radio station's power sources to carry on the pair again, cannot open the electricity pair simultaneously. If it is the paired radio station, separation of the power is not matter. When a launcher pairs for many receivers, firstly, it must let the launcher and the receiver pair, when the launcher matches with one of the receivers, turns off the power source of the receiver, then another receiver and the launcher pair. The rest may be deduced by analogy. After all stations match, a launcher with many receivers can be used. Notations:
1. When pair two stations distances must maintain between 1M and 10M. After pairing successfully, they can be the long-distance use 2. This receiver can coordinate the LE902/LE871/LE838 use. 3PIN male terminal function: DMX512 signal input 1 : DMX signal place 2DMX signal- 3DMX signal+
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter.