NO Left Speaker Cup Left Speaker Cup Left Speaker Cup Left Speaker Cup 114mm USER MANUAL R L R ANC BT OFF LED lndicator 114mm THE HAYMAKER headphones Control Switch LED lndicator 3.5mm Jack Line-in Port Music and Call Touch Controls Type-C Charging Port Light Feature Touch Controls R On the left frame edge, position to BT button to turn on Biuetooth , the operation LED ashes in blue, and the headphones enter pairing mode automatically as the operation LED ashes quickly in red and blue. To pair, go to Bluetooth settings on your device and select THE HAYMAKER. The operation LED will ash slowly in blue upon a successful connection. Note: After the rst pairing, the device name "The HAYMAKER" will be displayed in the Bluetooth directory of the paired device. Upon successful pairing to device, headphones will pair automatically within 5 seconds. name, repeat pairing process again. Headphones can be paired to 2 devices at the same time. If you do not pair successfully, please check the device, clear the device R Music and Call Touch Controls (Left Logo) When position to BT or ANC position, touch the logo area you can control below functions:
Action Single Tap Long press 2 sec Single Tap Swipe back to front twice Swipe front to back twice Double Tap Swipe back Swipe front Swipe up Swipe down Long press 8 sec Function Answer call Reject call End call Voice control Redial latest caller Play/Pause music Track Back Track Forward Volume Up Volume Down Clear pairing record Status Incoming call Incoming call On the call BT/ANC on BT/ANC on BT/ANC on BT/ANC on BT/ANC on BT/ANC on BT/ANC on No BT connection Action Position switch to BT position (OFFON) Position switch to O Position (ONOFF) BT Auto Pairing Connection Successful Device out of range BT Disconnected Position (BT standby mode, no Long Press Left Logo 8 sec while switch on BT audio playback or on the call) Full Charge Alert Low Battery Alert 3.3V Low Battery Protection Power O 3.1V LED Indicator Blue LED blinks 1.5 sec Red LED on for 2 sec Red/Blue LED Alternate ashes 0.5 sec on0.25 sec o Blue LED ashes slowly1 sec on3 sec o Red/Blue LED stays on Red/Blue LED Synchronous slow ashes1 sec on1 sec o Red LED blinks 1 sec Blue LED stays on Prompt sound and Red LED ashes 3 times every 5 sec (0.75 sec on 0.25 sec o , 0.75 sec on Red LED blinks 2 sec Charging Alert
*Note: No line-in connection in 3.5mm jack Red LED stays on Function Power On (BT) (OFFON) Power O (ONOFF) BT Pairing Search BT Pairing Successful BT Pairing Unsuccessful BT Disconnected Clear pairing record back to default setting. Enter pairing status again. Headphone Fully Charged Low Battery Alert 3.3V Low Battery Protection Power O 3.1V Charging Alert ANC BT OFF 1. When auxiliary cord is used or under BT connection, position switch to ANC position, a prompt sound "beep" will be emitted, then active noise cancelling is activated. 2. With ANC on, triple tap any area of right spearker cup, the ambient sound feature will activate / turn on and will lower content to 10% volume to easily listen to surroundings. Repeat triple tap to deactivate / turn o ambient sound. Right Speaker Cup PC Controller Cable R Ear Pad Replacement L R Mic HD 7.1 Troubleshooting Problem pairing and connecting Make sure the headphones are not connected to another device. Disable and enable Bluetooth on your device. Move the headphones closer to the device or alter their positions to avoid Bluetooth interference. Verify no other wireless equipment interfere with your headphones Bluetooth signal. Problem with sound transmission Move the streaming device to another position. Your body, distance, dierent materials and other wireless equipment can interfere with the wireless signal between your device and headphones. R R FAQ and quick start guide Visit: www.the haymaker.com for more instructions and help on this product. Light Feature Touch Controls (Right Logo) Note The LED light of headband logo is synchronized with the speaker cup logo, touch the logo area to control. 3s x3 x1 x1 Action Function Remark Long press 3 sec LED light On /O Triple Tap Ambient Sound On/O ANC ON Status, when Ambient Sound On, the content will be lower 10%
volume Swipe forward or back Choose Color Total 8 colors to choose Swipe up or down Change RGB Light Mode Single color breathing, Flash, Stay on, Auto cycling for 8 colors 1. Wired Playback 2. Console Play 3. PC Mode Note: When Auxiliary cord is used, left control panel function is deactivated. Must use paired device for controls. 1. Wired Playback, plug auxiliary cord into headphone jack then into device. 2. Console Play, plug auxiliary cord into headphone jack and then into controller. 3. PC Mode, plug included PC controller into USB port of computer and then auxiliary cord into headphone jack. x1 x1 x1
Action LED indicator Function Single click Mic button Sound Eect button cycling Mic Mute LED on Microphone Mute Dirac 7.1 / HD LED on Stereo 2.0 (LED o), Virtual 7.1 / HD ON Need software installed Volume Up/Down N/A Control volume
(PC Gaming Mode) Note Dirac 7.1, Dirac HD sound software needs to be downloaded from www.the-haymker.com System supportedWindows 10. Plug Type-C charging cable to charge headphones. Please charge the headphones with a 5.0V power adapter. 100% Full charge time 2.0hrs. Battery duration (In PC Gaming Mode, LED can still be activated, which is powered by internal lithium battery):
aE ch color requires a dierent amount of current. Therefore, battery consumption is dierent per color. consumes the maximum current).
(The data in the table below is based on the Cyan light which Mode Stay on Single color cycling Single color ash Single color breathing Line in+PC Gaming 13 Hrs 14 Hrs 14 Hrs 14 Hrs Line in+ANC BT BT+ANC 11 Hrs 12 Hrs 12 Hrs 12 Hrs 10 Hrs 8.6 Hrs 11 Hrs 9.6 Hrs 11 Hrs 9.6 Hrs 11 Hrs 9.6 Hrs The headphones standby battery duration: 6666 Hrs When replacing the ear pads, the ear pad will be automatically forced into the correct position by magnets. Important safety instructions 1. Read, follow and keep these instructions. 2. For the best possible experience, always use the product as described by the manufacturer. 3. Always handle your headphones with care and protect them from external damage. 4. Clean your headphones using a soft dry cloth. Never use water, cleaning detergent, leather polish or other substances as they may damage your headphones permanently. 5. Avoid exposure to extreme conditions such as very cold or hot temperatures, magnetic elds or damp environments. 6. Listening to music at high volume for prolonged periods of time can cause permanent damage to your hearing. 7. Contains small parts and are not suitable for children age three (3) and below. 8. The headphones contain magnetic material. 9. The headphones contain a Lithium battery. If misused or damaged it can become a hazard and is at risk of explosion. 10. Should a battery cell leak, do not allow the liquid to come in contact with skin or eyes. 11. The headphones must be disposed of with regular household waste. Please dispose of in accordance with local regulations. 12. Do not use your headphones in the immediate proximity (10 cm) of a pacemaker. 13. Do not subject the headphones and included accessories to abnormal wear and tear. 14. Do not expose the headphones to temperatures below - 20C or above +45C. 15. Do not charge the headphones in temperatures below 0C or above +45C. 16. Do not attempt to burn the headphones. The battery could explode causing injury or death. 17. Do not use or store the headphones near to a vehicle airbag due to risk of injury. 18. Do not attempt to open, modify, disassemble, repair or try to access the internal structure of the headphones. They are not user serviceable. 19. Do not use headphones while driving, jogging or walking through trac areas. Headphones eectively isolate external sound and noise which means that when in use, you might not be able to hear your surroundings. 20. Do not drop, sit on or cause other unusual impact to the headphones. 21. Do not expose to re, water or high voltage equipment. 22. Do not expose the headphones to rain or moisture. 23. Do not use the headphones near water, bathtubs, sinks, saunas, pools, other liquids or moist areas. 2019 Peak Audio, LLC. All rights reserved. Model: HM100. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Peak Audio,LLC. is under license.