smart wristband user's Guide Wear it properly The bracelet is best worn aer the ulnar styloid Adjust the size of the wrist according to the adjustment hole; buckle the wrist strap buckle. The sensor should be close to the skin to avoid moving Device connecon the device, and the smart phone needs to set the user's Dial pad for making calls (note: the phone also needs to be connected to Stopwatch funcon Tips for Android users:
Seng this feature reset will erase all data in the bracelet (such as step For the rst use, you need to connect the APP for calibraon. Aer Click the screen on the standby page to enter the main menu, the voice in advance in the voice menu) a device) phone book Enter the stopwatch and click the start buon to start ming, click the When using the reminder funcon, you need to set it to allow "FitPro" to pause buon to stop, and click the reset buon to clear the ming. run in the background; it is recommended to add "FitPro" to the rights counng) Remove device the connecon is successful, the bracelet will automacally style of the main menu can be switched Add 8 commonly used contacts in the APP. Aer the bracelet is Custom dial management and open all permissions. Remove device This feature will erase data and remove device synchronize the me. Bracelet reset device This funcon will clear all data of the bracelet successfully connected with the APP Bluetooth, the contacts can be You need to connect to the APP to get the dial sengs, you can choose Alarm seng Turn on the Bluetooth switch of the mobile phone system enter
(such as step counng) displayed in the bracelet phone book. Click the contact to make a call the recommended dial / default dial / album custom dial to synchronize In the connected state, 8 alarms can be set. Aer seng, it will be the app device module sengs click Bind device, experience Switch to the heart rate three-in-one interface to start the test, heart
(Note: The phone needs to be connected to a device) more features to enter, it will automacally search for nearby rate three-in-one interface 60s meout automacally o screen Music control to the bracelet. APP funcon and sengs Bluetooth devices on the bracelet, nd and connect the bracelet
(heart rate and blood pressure need bracelet hardware support). The bracelet can control the previous song and the next song, and pause Personal informaon synchronized to the bracelet; oine alarm is supported. Aer the synchronizaon is successful, even if the APP is not connected, the bracelet will be reminded according to the set me. device. Clock interface
/ start playback. (Note: devices need to be connected to use Please set your personal informaon aer entering the app. Looking for a bracelet Charge the bracelet According to the instrucons, jump to the mobile phone system calibrate the me;
Aer the pairing is successful, the APP will pop up a guide page. Aer synchronizing with the phone, the bracelet will automacally this feature phone) Dual mode switch weight - distance Sengs Personal Informaon, you can set gender - age - height -
In the connected state, click the Look for the bracelet opon and the Swipe le or right on the standby page to cycle through the dials This switch needs to be turned on for the phone to search for the You can also set your daily goal steps to monitor daily compleons. device. If the phone is not connected to the device within 5 minutes aer the bracelet is turned on, the switch will be Applicaon push SMS nocaon:
bracelet will vibrate. Remote photography In the connected state, start the photo from the wristband or the APP to enter the remote camera interface, shake/turn the wrist/touch the Use it for the rst me to ensure that the baery is in normal condion. If the power is not turned on normally, please connect the charger to charge the device. Install the bracelet app on your phone Bluetooth search t H13/
/HB13mini/HB13/L10/L20/H15/L21PLUS the connecon is successful, you can make / receive calls and listen to music (Note: If the mobile phone system Bluetooth has not been searched equipment, please enter the Dual mode menu and set it to On, you cannot make calls without connecng the Scan the QR code or go to the App Store, app download and install the equipment.) Step Number of steps Wear the bracelet and record the number of daily movement steps to view the current real-me steps. distance app. APP will automacally save the Bluetoot h address of the bracelet, The distance of moon is esmated based on the number of walking and the APP will open and run in the background, and will automacally search and connect the bracelet;
steps. Calories turned o automacally, and it needs to be turned on manually when it In the connected state, if the SMS reminder funcon is enabled, the bracelet, and automacally take a photo aer 3 seconds of counng is used again. exercise more All sports modes can record the calories and duraon of skipping rope. Sleep mode When you fall asleep, the bracelet will automacally enter the sleep bracelet will vibrate when there is a text message. down. Please allow the APP to access the photo album to save the Other reminders:
In the connected state, if this funcon is enabled, when there are self-portrait photo. Sedentary reminder messages such as WeChat, QQ, Facebook, etc., the bracelet will vibrate Set whether to enable the sedentary reminder funcon, you can set the to remind and display the content received by the app (You need to give reminder interval, if you sit for a long me in the set me, the bracelet monitoring mode; automacally detect your deep sleep / light sleep /
the APP permission to get system nocaons, and the wristband can will remind you. smart wristband stand by
-10C~50C Basic parameters Equipment type Vibraon motor Operang temperature System Requirements of Lithium polymer type baery Synchronously Bluetooth 4.0 sensor Lowpower acceleraon sensor IOS9 or above / Android5.0 or above Precauons 1. Bathing and swimming should not be worn. 2. Please connect the bracelet when synchronizing data. 3. Use the included charging cable to charge. 4. Do not expose the handle ring to moisture for a long me, where the temperature is extremely high or extremely low. 5. The ashover of the wristband restarts. Please check the memory informaon of the mobile phone to clear it and try again, or exit the APP and reopen it. Android phones use all nocaon permissions to read contact informaon and give the app background running in the phone sengs. Bracelet funcon descripon Slide down the standby page to enter the nocaon reminder, and Esmate the calories burned based on the number of walking steps wake up all night, calculate your sleep quality; the wristband only shows display 20-40 words). Raise your hand to brighten Heart rate, blood pressure, blood oxygen three-in-one sleep data details. opon (calls for incoming calls need to be connected to device) li your wrist and turn the screen to yourself to light up the screen. Aer entering the heart rate three-in-one test interface for a few Note: Sleep data will be available when you wear your wristband and Do not disturb mode the total length of deep sleep / light sleep / sleep, APP end can View Note: Incoming call reminder system is enabled by default, no switch Turn this funcon on. When the wristband is in the state of the screen, Android/IOS System requirements: Android 5.0 and above; iOS9.0 and above; support Swipe le or right on the standby page to cycle through the dials Long press 2 seconds on any dial page to start the language results are displayed. This feature requires a wristband to support heart synchronized to the app while sleeping. Turn on the vibraon seng funcon, when there are calls, messages or period. During the set me period, the bracelet stops receiving rate and blood pressure sensors. Informaon mode other reminders, the bracelet will vibrate. If it is o, the bracelet will only nocaon messages to avoid reminding messages. slide up to enter the control center seconds, the current heart rate, blood pressure, and blood oxygen test sleep will be detected from 10:00 pm. Sleeping data for 3/4 hours can be Other funcons:
Turn on the Do Not Disturb mode. You can set the Do not disturb me for Bluetooth 4.0. assistant. (Remarks: The mobile phone also needs to be connected to dial Informaon menu can view the latest news content have a screen reminder without shaking to avoid interrupon. Device reset reasonable frequency harmful FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide protection againstharmful interference in a residential installation. This equipment generates, with energy uses and can radiateradio and, maycause interference the there thatinterference occur is equipment cause determined by turning the equipmentoff interference Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is harmfulinterference to radio or television reception, which can be user in communications. installation. instructions, guarantee does accordance However, this If thefollowing measures:
radio a encouraged if to in particular installed correct more used one and and will not not the on, the try no by or to to of is connected. Consult the dealer or an experienced radio/TV technician for help. Any Caution:
could void your authority to operate this equipment. modications changes this or to device not explicitly approved by manufacturer 15 part with complies device This conditions:
(1)This interference received, including interference that may cause undesired operation. interference, Operation harmful subject device device Rules. cause may and FCC this not the
(2) to of is the following two must accept any complies equipment FCC This environment. should between the radiator and your body. equipment with This radiation be installed exposure and limits operated set with forth for an minimum uncontrolled 0cm distance