55mm Haylou-GT2 55mm Haylou-GT2 TWS BT Earphones User Manual m m 0 8 m m 0 8 385mm 3 1.5 1 MFB LED 10 43mAh 2 3.5 150 5V 100mA 5.0 5V 500mA 5V 150mA 2 4 380mAh 1.5 1
,4.5(2) 4.5 2 2-3 Haylou-GT2_R Haylou-GT2_R (Haylou-GT2_L L) USB 1.5 Haylou-T15_R Haylou-GT2_R Haylou L2 R2 1
1
1.5 3 1 2CCC 3 4
15 1 12() 1 2 3 Pb Hg Cd Cr
(VI) PBB PBDE DIBP 2-
DEHP DBP BBP SJ / T 11364 O:
(EU)2015/863 X:
(EU)2015/863 ROHS 10 Haylou:
17 Haylou 215 Haylou 312 Haylou
,Haylou
:5 13130313051306 4 www.haylou.com 4008-555-083 1. 2. 3. 2 4. CCC 5.
- 045
2A Overview What's in the Box How to Wear Stereo Mode Mono Mode Power-on Pick up earbuds from the case to power them on. If earbuds are out of the case, hold MFB for 1.5s to power them on(LED glows white for 1s). Female charging port LED MFB Eartip LED Eartips * 3 pairs(medium size eartips have been put on), earbuds, charging case, charging cable, user manual. Basic Parameters(earbuds) Operation range: 10m(open space with no obstacle) Battery capacity: 43mAh(single earbud) Charging time: approx. 2hr Talk time: approx. 3.5hr Standby time: approx. 150hr Input parameter: 5V 100mA Battery type: li-ion Bluetooth version: v5.0 Basic Parameters(charging case) Input parameter:5V 500mA Output parameter:5V 150mA Charging time: approx. 2hr Standby time: approx. 4 months Battery capacity: 380mAh Battery type: li-ion Pogo pins Please keep Mic out of ear when calling Hold for 1.5s LED glows white for 1s Please adjust Mic towards your mouth to gain better calling experience. How to Charge Power-o For rst time use, please remove stickers from the case then top up earbuds. Pop earbuds into the case to power them o. Hold MFB for 4.5s to power them o.(LED glows red for 2s). Stickers Hold for 4.5s LED glows red for 2s Auto connection: take up two earbuds from the case, they will auto power on and pair with each other in 3s. When LED on right earbud blinks white slowly, search for Haylou-GT2_R and tap on cellphone to connect both earbuds to cellphone. If earbuds fail to connect to cellphone, please pop them back into case and repeat the above steps. Earbuds will auto reconnect to the last device in connectivity records, if any. (Bluetooth faculty needs to be activated). Note: GT2 has been set to factory before shipping out. Hold for 1.5s to power on LED Haylou-GT1_R Haylou-GT1_R Haylou-GT2_R Haylou-GT2_R Auto Connection: take up either earbud from the case. The earbud will auto power on and LED will then blink white slowly. On cellphone, search for Haylou-GT2_R/L and tap to connect the earbud to cellphone. Earbud will auto reconnect to the last device in connectivity records, if any. ( Bluetooth faculty needs to be activated ). Note: it will cost more time for left earbud to reconnect to cellphone. Manual pairing: power o earbuds then manually power on either earbud. When LED on the earbud blinks white slowly, search for Haylou-GT2_R/L and tap on cellphone to connect. Charge the Case Charge the case via USB cable. LED will glow solid red when charging and turn o once topping up. Manual pairing: power o earbuds then manually power on them. Earbuds will auto pair with each other when LED on right earbud blinks white slowly. On cellphone, search for GT2_R and tap to connect both earbuds to cellphone. Charging: solid red Top-up: LED turns o Functions Daily maintenance Factory Setting Double press MFB on left earbud Skip track backward Double press MFB on right earbud Skip track forward Press MFB Pause music/resume playing Press MFB Answer incoming call/end the call Hold MFB for 1.5s Ignore incoming call Triple press MFB Activate voice assitant(standy) Please do not shower with earbuds. Do not wear them in rainy day. Do not leave them in washing machine or other extreme situations. Clean them with dry cloth after use in pursuing a longer service life. Caveats 1. Please charge the product, in case it has not been used over two weeks. 2. Please use certicated charger. 3. Do not wear earphones for a long term to protect your hearing. 4. Do not wear earphones in any situations with potential risks as wearing them may reduce your perception to the outside world. If earphones do not function well, please refer the following steps to reset factory: take earb uds out from the case. Power o the earphones then hold MFBs on both earbuds for about 15s ( LED will blink red and white three times twice). After that, put them back to the case. Delete connectivity record on cellphone before processing another pairing (All connecitvity records relating to the earbuds will all be removed). Audio only outputs from single earbud It's a rare case . Please reset the earphones, remove connectivity record on your cellphone and re-connect the earphones to your cellphone. Other problems in charging LED glows solid white for 1 minute when earbu ds are topped up. Carry case will not charge earbuds, if its battery drains. LEDs on carry case will turn o once the case is topped up. If you charge it once again, LEDs will not give any notice, which does not mean the case is not charged. Hazardous substances and their contents in the item Hazardous Substances Pb Hg Cd PBB PBDE DIBP DEHP DBP BBP Cr
(VI) Aftersales & Support Warranty Period:
12 months after purchase
(please keep your receipt properly) Part Name Main body Battery Ear tips Accessories Charging cable This form is made by SJ/T 11364 regulation. Omeans that hazardous substance content in the homogeneous materials of this part is within the limits of (EU2015/863 regulation . X means that hazardous substance content in ,at least, one certain homogeneous material of this part is beyond the limits of (EU2015/863 regulation ,but there is no mature alternative in the industry at present, it still conforms to the EU ROHS Directive in the scope of exemption. Notes: Please arrange using time properly as your hearing may be damaged by using the device for a long time. Free Service:
If any quality defects happen during the warranty period, please take the receipt and contact with your distributor for aftersales service. Following cases or any damages/defects that are not due to quality issue are not covered in the warranty. 1. Any defects or damages caused by natural disasters, abnormal voltage or other environmental facts. 2. Any unauthorized disassembly, modication or change of parts. 3. Any damages caused by improper use of the product including soaking, corroding, falling down, squeezing or exposure to abnormal temperature or humidity. Model Number:
Date of Purchasing:
User's Name:
User's Phone:
User's Address:
Shop's Name:
Shop's Address:
Comments:
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
-Reorient the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC ID:2AMQ6-GT2 L30.001.000047AY GT2 70g