HAY LOU Haylou GT3 Truly Wireless Earbuds User Manual Overview How Pogo Pins s*
What's in the Box Bluetooth earbuds, charging case, eartips (2 pairs) , user manual, charging cable Sticker . q Prior to using, please peel off sticker covering the pogo pins and top up both earbuds andche dag case. Earbuds Parameters Operation range: 10m(open space with no obstacle) Battery capacity: 40mAh(single earbud) Charging time: approx. 1.5hr Caling time: approx. 3hr Standby time: approx. 105hr Input: 5V = 100mA Battery type: Li-ion Bluetooth version: V5.0 Charging Case Parameters Input: 5V == 500mA Output: 5) 150mA Charging time: approx.2.5hr Standby time: approx.5 months. Battery capacity: 600mAh Battery type: Li-ion 5.2 Power-on 1: takeout earbuds to auto power on. 2: keep touching the panel for 1.5s to power on. Take out earbuds
(auto power-on) LED glows Keep touching solid white the panel for 1.5s Power-off 1: pop earbuds back into case to power off. 2: keep touching the panel for 4.5s to power off(LED glows solid red for 2s) . Pop them back into case
(auto power off) LED glows Keep touching solid red the panel for 4.5s for 2s
\gnore Call Keep touching the panel for 1s to ignore call. Keep touching for Is How to Charge Put earbuds back into the case to charge, earbuds will auto power off.LED will glow solid red when charging and turn to white for 1 minute once top up. Mono Mode Auto connect: take out either earbud to power on. When LED blinks white slowly(before that it blinks red and white promptly), search for Haylou GT3 on cellphone and tap to connect. Manual connection: when earbuds are turned off, manually turn on one of the earbuds. wait for the earbuds LED will then blink white slowly. On cellphone, search for the earbud and tap to connect. Auto pairing:
Take out both earbuds from the case.On cellphone, search for Haylou GT3 and tap to connect.If you fail to build connection, please pull earbuds back into the case and repeat the above steps.Once connected, earbuds will auto reconnect to the last device in connectivity records whenever powering on(Bluetooth faculty needs to be turned on) . Keep touching the panel nrem /rvoiaie Deices for 1.5s
@haylou G3 LED Manual connection: when earbuds are turned off, manually turn on both of them again, they auto start to pair with each other(LED will blink red and white promptly). When they finish pairing(LED on master earbud will blink white slowly), search on cellphone and tap to connect. FREF Fete BFS, siamRe esl RBS ORE Haylou GT?
Functions
-* Double touch left earbud Skip track backward t Double touch right earbud Skip track forward t* Touch either earbud Resume/ pause playing
;* Double touch either earbud Answer/end incoming call
}* Keeping touching either earbud for 1s Ignore incoming call
+* Triple touch left earbud Activate voice assistant when standby
' Triple touch right earbud Activate voice assistant when standby Caveats 1.Please charge the product, in case it has not been used over two weeks. 2.Please use certificated charger. 3.Do not wear earphones for along term to protect your hearing. 4.Do not wear earphones in any situations with potential risks as wearing them may reduce your perception to the outside world. Daily maintenance Please do not shower with earbuds.Do not wear them in rainy day.Do not leave them in washing machine or other extreme situations.Clean them with dry cloth after use in pursuing a longer service life. e Factory Setting If earbuds do not funcion well, please refer the following steps to reset factory: put earbuds back into the case to charge themselves, keep touching both panels for 10s or until LED blinks red and white 3 times. Delete relative connectivity records on cellphone and re-build connection with cellphone.
@e Audio only outputs from single earbud It'sar are case.Please reset the earbuds, remove connectivity record on your cellphone and re-connect the earbuds to your cellphone.
@ Other problems in charging LED glows solid white for 1 minute when earbuds are topped up. Carry case will not charge earbuds, if its battery drains. LEDs on carry case will turn off once the case is topped up. If you charge it once again, LEDs will not give any notice, which does not mean the case is not charged. Aftersales&Support Warranty Period:
12 months after purchase
(please keep your receipt properly) Free Service:
If any quality defects happen during the warranty period, please take the receipt and contact with your distributor for aftersales service. Following cases or any damages/defects that are not due to quality issue are not covered in the warranty. 1.Any defects or damages caused by natural disasters, abnormal voltage or other environmental facts. 2.Any unauthorized disassembly, modification or changeof parts. 3.Any damages caused by improper use of the product including soaking, corroding, fallingdown, squeezing or exposure to abnormal temperature or humidity. Model Number:
Date of Purchasing:
User's Name:
User's Phone:
User's Address:
Shop's Name:
hop's Address:
comments:
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, ifnotinstalled and used in accordance with the instructons, may cause harmful interference to radio communicatons.However, there is no guarantee that interference wil not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circut different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of theFCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.