Magnec Wireless Car Charger Mount Product Intro This product is a smart wireless charging product that compable with any Qi-cered smartphones & devices and support fast charging for Apple and Samsung products. This product is designed to allow vercal rotaon, which can be used in conjuncon with various angles. The base is made by special material that can scks and holds on any surface. Design and Features Input : 5V/2A9V/1.8A Output : 5V/1A9V/1.2A Power Output : 10W (Max) Fixed Mounng Design AC Vent Mounng Design Wireless Charging Area MicroUSB Connect Port Angle Adjuster
/ Rotator Angle Adjuster / Rotator Fixed Mount AC Vent Mount LED Power Indicator Standard Charging: Slow Flashing Fast Charging: LED Stays On Error Nocaon: Fast Flashing Fixed Mounng Features Parts Included Wireless Charging Pad x1 Soft Strap Finger Grip x2 So Strap Finger Grip The greatest design of this product so strap nger grip. In addion to sck the smartphones on the wireless charger, it rmly adhered to the product while taking photo or general use of smartphones. This delivers a more convenience and comfortable user experience. Installaon Guide Remove the protecve layer and sck on the back of phone case. *Please to make sure the surface is clean and dry before installaon. Ball Rotator x1 Fixed Mount x1 Make sure to align the so strap nger grip in the centre of the phone. The longer side located to the boom. *Not recommend to apply directly to the back of the phone with An ngerprint coang. The wireless charging pad can be rotated to 90 vercally. b Flexible scking base, scks rmly onto dierent shapes of dashboard. Fast Car Charger x1 AC Vent Mount x1 Press and tap it rmly aer sck it on to enhance the adhesion. *Please note that the so strap nger grip cannot be reused aer removal. The adhesion will reach to the maximum aer applied 48 hours. Product Instrucon Micro USB Cable (1m) x1 Instruction x1 Fixed Wireless Charging Mount Installaon Assembling :
AC Vent Mount Installaon Assembling :
+
+
+
Precauon So strap nger grip must be used to aach on the wireless charging device. Any metal in the adhesive area will aect the charging. Ensure the environment temperature between 0-45 C while using the wireless charger. The safety protecon could be acvated and cung o the charging power when the temperature goes too high aer sun exposure. The power will be restored aer cooling down, and ready for charging again. Use QC2.0 or above adapter for fast charging. Please keep water or any liquid away while charging. Disconnect the power from charger before cleaning for the mount. Simply aach directly to a suitable posion on cars air vent. FCC Statement Remove the 3M protecve layer from the boom. Then scks and press it rmly for few seconds on the selected spot. *Ensure to keep the surface clean and dry before installaon, and it cannot be reused aer removal. The adhesion will reach to the maximum aer 48 hours of installaon. QI Apple
: 5V/2A9V/1.8A
: 5V/1A9V/1.2A
: 10W() MicroUSB
:
:
:
a 90 b
(Apple
)
, 48
:
:
+
+
+
3M 48 0-45C QC2.0 USB
() USB
()
(
) x1 x1 x1 x1 x2 x1 1M x1 x1 This device complies with Part 15 of the FCC rules. Operaon is subject to the following two condions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operaon. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment o and on, the user is encour-
aged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separaon between the equipment and receiver.
--Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. Connect the Wireless Charging device to power through USB cable. Blue LED indicator will be on aer connecng to the power. Connect the Wireless Charging device to power through USB cable. Blue LED indicator will be on aer connecng to the power. Aer completed all above, place smartphone with so strap nger grip on the wireless charging area and ready for charging. Aer completed all above, place smartphone with so strap nger grip on the wireless charging area and ready for charging. 2 3 4 5 6 7 8 9 10 11 12 Cargador Inalmbrico Magnco de Automvil Instruccin Introduccin de producto PROXA cargador inalmbrico inteligente es compable con cualquier producto con estndar QI y soporta la carga rpida de Apple y Samsung. Diseando para tener la capacidad de colocarlo en cualquier ngulo de forma horizontal o vercal. La base del soporte hecho de material disnto puede encajar en radianes varios. Diseos y caracterscas Entrada de Voltaje : 5V/2A9V/1.8A Salida de Voltaje : 5V/1A9V/1.2A Potencia : 10W (Max) Soporte de montaje jo Soporte de rejilla de venlacin rea de carga Puerto de Micro USB Ajustador Base del soporte Indicador LED Carga estndar: Luz intermitente lenta Carga Rpida: Luz permanente Nocacin error: Luz intermitente rpida Caracterscas Ajustador Soporte de rejilla de venlacin a El panel del soporte puede girar 90 grados vercalmente. b El base exible con ra 3M se queda rmemente con cualquier supercie. Grip agarre elsco Un diseo destacado Grip agarre elsco.Gracias al diseo del Grip, el mvil sujeta rmemente con el cargador inalmbrico. Mucho ms que eso, ulcelo para sostener el mvil seguro y cmodo. Con Grip agarre elsco, no tendr que preocuparse ms. Gua de instalacin Rere la lmina del Grip y presione contra el disposivo
(mvil) que necesita cargar. Atencin: En primer lugar, limpie y seque la supercie del disposivo (mvil) para bien pegado con el Grip. Alinee el Grip agarre elsco en el centro de la parte posterior del disposivo. Y peque el lado ms largo del Grip hacia el fondo del disposivo.( No recomendada para pegarlo directamente al mvil hecho de An-
ngerprint Coang.) Seguidamente, presione el Grip contra el disposivo varias veces para que se quede rmemente pegado. Atencin: La adhesin podr alcanzar su mxima solidez despus de 48 horas. No pueda reulizar el Grip agarre elsco. Instalacin del base del soporte Ensamblar el soporte :
Ensamblar el soporte :
Instalacin del soporte de rejilla de venlacin Precaucin Qi Apple SamsungQi
:
+
+
+
Rere la lmina de ra 3M. Seguidamente, presione la ra directamente contra el lugar en el que desee posicionar el soporte. Atencin: Es necesario que limpie y seque la supercie al instalar. Adems, no pueda reulizar la ra 3M. La adhesin podr alcanzar su mxima solidez despus de 48 horas. Introduzca el soporte en la rejilla de venlacin del automvil sencillamente. Grip agarre elsco es necesario para sujetar el disposivo con el cargador inalmbrico. Impida el grip entre en contacto con objetos metlicos para que no afecten la carga. Se use en lugares en los que la temperatura ambiente est entre 0 C y 45 C La proteccin del cargador acvar apagando la electricidad automcamente cuando la temperatura est elevada por exponer a la luz directa del sol. Espere la baja de temperatura para que funcione adecuadamente. El funcionamiento de carga rpida pide el adaptador con QC2.0 o ms alta. Evite los disposivos entre en contacto con lquidos al cargar. Apague el cargador antes de limpiar el soporte para que asegrese la seguridad. Contenido en la caja Encienda el cargador inalmbrico por conectar por cable USB. (La luz azul encender al conectar.) Encienda el cargador inalmbrico por conectar por cable USB. (La luz azul encender al conectar.) Panel de cargador inalmbrico x1 Eje x1
: 5V/2A9V/1.8A
: 5V/1A9V/1.2A
: 10W MicroUSB LED Complete los dos pasos anteriores y sujete el disposivo (mvil) pegado con el Grip agarre elsco en el panel del cargador inalmbrico para empezar a cargar. Complete los dos pasos anteriores y sujete el disposivo (mvil) pegado con el Grip agarre elsco en el panel del cargador inalmbrico para empezar a cargar. Grip Agarre elstico x2 Cargador para carga rpida x1 Base del soporte x1 Soporte de rejilla de ventilacin x1 a 90 b
:
+
+
+
3M
*
045 QC2.0 USB LED USB LED x1 x1 x2 x1 x1 x1 14 15 16 17 18 19 20 21 22 23 24 Cable Mirco USB (1m) x1 Gua de instruccin x1 Micro-USB(1m) x1 x1