FCC ID: 2AVC7-PB700 PBuds 700

PROXA PBuds700 Model: PB700 FCC ID: 2AVC7-PB700 Contents :

Charging Instruction :

Pairing :

Charging case Charging port : Charge the case by connecting with Micro USB cable. LED indicator : Indicate charging status. LED indicator button : Press to know the battery status through LED indicator. 1. After unboxing, please charge the charging case and earbuds. 2. Place earbuds into the charging case, and close the case. 3. Connecting the case with Micro USB cable to charge. 1. To power on, remove earbuds from the charging case. 2. Turn on Bluetooth from smart phone and connect with PROXA PBuds700 .

* The Bluetooth connection supports up to 8M for your smart phone and earbuds. Charging case LED indicator button LED indicator Wireless earbuds Compatible with iOS / Android / Windows / Mac OS system Charging port Accessory Micro USB cable Micro USB cable PROXA PBuds700 Connected Wireless Bluetooth Earbuds Instruction Touch control area Earbuds functions :

*Both earbuds offer the same functions except for Manually power on (Tap and hold for 5 secs) , and Factory default setting . Power on Power off Pair two earbuds English / Chinese voice prompt exchange Remove from the charging case / Tap and hold for 5 secs

(Each side power on separately) Place in the charging case / Tap and hold for 5 secs

(Both sides power off simultaneously) Put two earbuds close to each other (Within 0.78 inch / 2cm) for automatic pairing (Within 6 secs) Four taps (Not on the phone) Activate voice assistant Tap and hold either side of earbuds for 3 secs Low Battery notification

(Earbuds) Once earbuds indicate Battery low , it will power off within 1 min Power off automatically Earbuds will automatically power off, if it is not paired with smart phone for 5 mins Pairing Error Step 1: Reset to factory default setting (See below steps) and place earbuds back to the case for 10 secs Step 2: Pair two earbuds again as above (See Pair two earbuds ) Reset to factory default setting

(All pairing list will be cleared) Each side reset to factory default setting separately Step 1: Tap and hold earbuds for 5 secs to power off Step 2: Tap and hold earbuds for 7 secs until hear Pairing mode Step 3: Tap 7 times, hearing Power off and indicating sounds Call functions :

Media functions :

Specification :

LED Indicator Cautions :

FCC Compliance Statement :

* Both earbuds offer the same functions.

*Both earbuds offer the same functions except for Volume adjustment and Track selection . Earbuds Play / Pause Volume up Volume down Next track Previous track Tap and hold for 1 sec and hear a DU sound Double-tap on the right earbud Double-tap on the left earbud Triple-tap on the right earbud Triple-tap on the left earbud Incoming call Answer / End a call Indicate by smart phone Tap and hold for 1 sec and hear a DU sound Decline an incoming call Double-tap Switch between smart phone and earbuds Triple-tap (While on the phone) Cut off the ongoing phone Tap and hold for 1 sec and hear a DU sound Second incoming call (While on the phone) Answer a second incoming call and put current call on hold Double-tap Answer a second incoming call and end the current call Tap and hold for 1 sec and hear a DU sound Switch between two calls Double-tap End the current call and switch to the other calls Tap and hold for 1 sec and hear a DU sound Bluetooth5.0 Dimensions : L1.622 * W0.662 * H0.688 (inch) /

L41.20 * W16.74 * H17.33 (mm) Charging time : 1.5 hours Usage time : 2.5 hours Battery capacity : 30mAh Battery : lithium-ion polymer battery Charging case Dimensions : L2.26 * W1.81 * H0.95 (inch) /

L57.40 * W46.00 * H24.00 (mm) Input : DC5V / 400mA Output : DC5V / 150mA Battery capacity : 500mAh Battery : lithium-ion polymer battery

*While the charging case is disconnected to the charging cable and without earbuds inside, press the button above PROXA to know the battery status of the case. Charging Fully charged Out of battery Sufficient power Charging case Earbuds

(Place in the case) Blinking Green Solid Green

(Cable connecting)

(Cable connecting) Blinking Blue Solid Blue Solid Blue Blue LED off Do not use PBuds while around medical equipment. Please read and comply with the regulations when using PBuds on the flight. Do not use PBuds while around automatic door or fire alarm appliance. Do not disassemble, reassemble and repair this product. Do not operate PBuds in a humid environment. Do not put any object into this product. Do not expose PBuds to fire or excessive temperature. Please keep PBuds away from children. If you feel uncomfortable while using PBuds, please stop immediately. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IMPORTANT : The Federal Communications Commission warns that changes or modifications of the unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

* RF warning for Portable device:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12

Label PBuds 700 Model name: PB700 FCC ID: 2AVC7-PB700 Size: 20*20mm, used etch.

2019-12-26 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen STS Test Services Co., Ltd., 1/F., Building B, Zhuoke Science Park, No.190, Chongqing Road, Fuyong Street, Baoan District, Shenzhen, Guangdong,China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with DONGGUAN MEIDE DIGITAL TECHNOLOGY CO.,LTD. Room 202, Building 2, No.6 Rongfeng Street, Changan Town, Dongguan, China. (Applicant Name and address) Sincerely, Name: Kaideng Tian Title: Manager Company: DONGGUAN MEIDE DIGITAL TECHNOLOGY CO.,LTD.

2019-12-26 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AVC7-PB700 Product Name: PBuds 700 Model name: PB700, PB800 Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

(List here the documents for which you are seeking confidentiality for example ) Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Sincerely, Name: Kaideng Tian Title: Manager Company: DONGGUAN MEIDE DIGITAL TECHNOLOGY CO.,LTD.

Differences Description We DONGGUAN MEIDE DIGITAL TECHNOLOGY CO.,LTD. state:

Product PBuds 700 Model Name PB700, PB800 Brand Name N/A FCC ID:2AVC7-PB700 The electrical circuit design, layout, components used and internal wiring for above models are identical, only the appearance and color are different. The device have left and right earphones,the left and right earphones are electrically identical. Signatory Date 2019-12-26 Signature Name: Kaideng Tian Title: Manager Company: DONGGUAN MEIDE DIGITAL TECHNOLOGY CO.,LTD. Address: Room 202, Building 2, No.6 Rongfeng Street, Changan Town, Dongguan, China.