Features Control Panel LED charging Indicator DC Power Input: Use to charge the internal battery and Charge fully before use. The charge time is Note: This model features automatic Bluetooth pairing. Requires a 3.5mm audio cable (not included). Battery Power Pairing Bluetooth AUX IN power the speaker. Aux In (3.5mm Audio Input) OFF to turn off the speaker to turn off the lights volume down Power ON/OFF: Switch to ON to turn on the speaker, switch to Lights ON/OFF: Switch to ON to turn on the lights, switch to OFF Volume: Rotary right to adjust volume up, rotary left to adjust approximately 3.5 hours. When the unit is charging, the LED Charging Indicator will display a solid red light. When charging is complete, the indicator will turn off. Using a Micro-USB to USB cable (included), connect the DC power input on the speaker to the USB port of a powered on computer or USB power adaptor
(not included) to charge the speaker. 1. Connect a 3.5mm audio cable to the Aux In on the unit and the audio output/headphone jack on an audio device. 2. Use the controls on the connected device to select and play audio. Be sure the volume on your connected device is audible when you begin playing. 1. Power on the speaker, a voice will announce Bluetooth, when the unit is ready to pair. When pairing, remain within 3 feet of the unit. 2. Using the controls on your Bluetooth device, select SY118 in the Bluetooth Settings to pair. A voice will announce Bluetooth is connected, when the speaker is successfully paired to your device. If need be, refer to the users manual for your specific device for more information. 3. Use the controls on the connected Bluetooth device to select and begin playing audio. Bluetooth 5.0 Wireless range: 33 ft. Voice prompts announce speaker functions Full range stereo speakers Rotary volume control Color changing LED light effects 3.5mm Aux In Micro-USB port for battery recharge Built-in rechargeable battery Battery life: approx. 3.5 hrs at 50% volume Includes 17 Multimedia Sound Bar Users Guide for Model SY118 USB charging cable Users guide Rotary volume control
(NOT INCLUDED) FCCWarningStatement Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecould voidtheusersauthoritytooperatetheequipment.Thisequipmenthasbeentestedandfoundto comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidential installation. This equipment generates uses and can radiate radio frequency energy and, if not installedandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradio communications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticular installation. If this equipment does cause harmful interference to radio or television reception, whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotryto correcttheinterferencebyoneormoreofthefollowingmeasures:
Reorientorrelocatethereceivingantenna. Increasetheseparationbetweentheequipmentandreceiver. Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiveris connected. Consultthedealeroranexperiencedradio/TVtechnicianforhelp. Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowing twoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and
(2) this device must accept any interference received, including interference that may cause undesiredoperation. RF Exposure Statement To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20 cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.