105g75*53mm T600
/
Tuddrom T600 5.0 1.5 4 8g LED()
() 10m 2 300 90g MFB()
/
/
3.7V/43mAh 6mm 20~20000Hz 3.7V/400mAh 1083dB 16 1 LED USB 2 1.
:
MFB31 Power on
:
, MFB31Power o
:
2. 10S. Tuddrom T600 Connected ,:
3 MFB3 MFB3
/
//
/
3 10 3.0, 0000
, 3
, 3 USB, LED
(2) 1.5 125%
, 4 5 20-30 6 Thank you for choosing the Tuddrom T600True Wireless Stereo Earphone developed byTuddrom! To better use this product, please read the Quick Start Guide carefully before use and properly manage it. Product Specications Bluetooh version 5.0 Transmission range About 10m Headset charging time About 1.5h Music play time
/Talk time About 4h Charging time for the charging cradle Standby time
(including the charging cradle) Headset weight About 8g Weight of the charging cradle Headset battery usage Li-Polymer Battery 3.7V/43mAh Chargingcradle battery use Speaker size 6mm Sensitivity About 2h About 300h About 90g Li-Polymer Battery 3.7V/400mAh 1083dB Frequency range 20~20000Hz Impedance 16 Charging contact point LED(Red/Blue) MFB (multi-function button) Answer/End call Volume up/down leather vein 7 LED/White USB Wrist Strap 8 1Headset power-on/power-o Power-on Take the headset o the charging case. The headset is automatically powered on. In power-o state, hold down the MFB button for three seconds to power on the headset. Both red and blue indicators are on for 1s. There is a beep sound upon power-on. Power-o Put the headset into the charging case. The headset is automatically powered o. In power-on state, hold down the MFB button for 3s. The red indicator is on for 1s. There is a beep sound upon power-o. Note: In wireless stereo connection mode, if you power o a headset, the other headset will be also powered o. 2Pairing (rst use) Take the headset o the charging case. Red and blue indicators ash alternately, and a pairing between left and right earbuds starts. The pairing will take about 10s. After the pairing is completed, the indicator of the right earbud is o, and red and blue indicators of the red earbud ash slowly, indicating that it is pairing with the phone. Enable the Bluetooth function on the phone. Search for the Bluetooth device Tuddrom T600. Select Connect. After the connection is successful, a "Connected" message is displayed. There is a ringtone alert from the left earbud when there is an incoming call. 9 How to use How to charge Important safety information Headset power-on: Take the headset o the charging case to trigger an automatic power-on. (Or hold down the MFB for 3s in power-o state.) Headset power-o: Put the headset into the charging case to trigger an automatic power-o. (Or hold down the MFB for 3s in power-on state.) Play/Pause: press the MFB on the left or right earbud. Previous/Next: press the MFB twice on the left/right earbud to turn to the previous/next track,. Answer/Hang up a call: press the MFB on the left/right earbud. Reject a call: hold down the MFB on the left/right. Clear pairing information: In pairing mode (red and blue indicators ashing quickly), press the MFB three times. Pairing information is cleared, and the headset is automatically powered o. Or hold down the MFB for 10s in power-o mode to clear pairing information. Secure pairing: If the Bluetooth device connected to the headset runs a version lower than 3.0, a password is required. Enter the default security code 0000 to pair the headset with your phone. Automatic power-o: If the left earbud is not connected to a phone, it will be automatically powered o in 3 minutes so as to save power. If the right earbud is not connected to the left earbud, the right earbud will be also automatically powered o in 3 minutes. Reset: Put the headset into the charging case. 10 Charging the charging cradle. Use the matched USB cable to charge the charging cradle. The white charging LED indicators ash during charging. The number of ashing indicators varies with the battery level. All indicators turn solid white when the cradle is fully charged (a full charge takes about two hours). Charging the headset Fit left and right earbuds into the charging case. The red indicator on both earbuds will be on. When the earbuds are fully charged, the indicator will be o. A full charge takes about 1.5 hours. A fully-charged charging cradle provides about three charge cycles for the headset. Low battery level indication If the battery level of the charging cradle is low, the low-battery indicator on the charging cradle will show only one grid (25% left), reminding you to charge the charging cradle. When the battery level of the headset is low, the Bluetooth indicator will turn red and a low-battery beep sound can be heard. Caution: If you do not intend to use the headset for a long time, charge the headset once every 20 to 30 days to ensure its expected service life. Don't remove or replace the Battery,including sensitive electronic components, including a battery,and can be damaged or cause injury if dropped, burned, punctured, crushed, disassembled, or if exposed to excessive heat or liquid.Don't use damaged batteries and electronic components. Dispoal and recycling information Don't treat the product and battery as a household waste or into a re. When you decide to dispose of the product and its battery, please follow the local environmental laws to handle the battery to avoid an explosion. Medical device interference The product contains components and radios that emit electromagnetic elds and also contains magnets. These electromagnetic elds and magnets may interfere with pac-
emakers,debrillators, or other medical devices. Maintain a safe distance of separation between your medical device and product.Consult your physician and medical device manufacturer for information specic to your medical device. Stop using product if you suspect it is interfering with your pacemaker, debrillator, or any other medical device. EU Declaration of Conformity Hereby, Dongguan Tuddrom Electronics Co., Ltd declares that the radio equipment of type Bluetooth Tuddrom T600 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:http://www.uiisii.com/doc/
Caution:
Use the Bluetooth Earphone in the environment with the temperature between
-10 and 40. The product shall only be connected to a USB interface of version USB2.0 or higher and that the connection to a power USB is prohibited. For Battery: Risk of explosion battery is replaced by an incorrect type, dispose of used batteries according to the instructions. To prevent possible hearing damage, do not listen at high volume levels for long periods. 13 14 PRODUCT DESCRIPTION NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. 15 16 LED (/) MFB Answer/End call Volume up/down LED/
USB 8 USBLED 1.5 3 25 Bluetooth 1. MFB3 1Power on 2. MFB3 1Power on 3. 10 BluetoothBluetoothTuddrom T600 Connected 19 2030 22 TuddromTuddrom T600Bluetooth Bluetooth 5.0 1.5h
/
4h 8g 10m 2h 300h 90g Li-Polymer Battery 3.7V/43mAh Li-Polymer Battery 3.7V/400mAh 6mm 20~20000Hz 1083dB 16 17 MFB3 MFB3
/
/
3 BluetoothBluetooth 3.00000 20 CMIIT ID:
FCC ID:2AQ39-T600 User Guide Product Information How to connect Product Information 11 12 21