Smart Siren V1.0 WIFI SMART SIREN USER MANUAL Please read this manual carefully before use. Smart Siren V1.0 Features Based on the TUYA smart home platform, work with most of the TUYA smart based smart products. On-site high-decibel alarm, flashing lights and other alarm modes. Home Arm, Away Arm, Disarm Low-battery detection System power off detection. Tamper detection. Built-in battery. Smart Siren V1.0 Download the app and register Search for "TuyaSmart" or scan the QR code below to download the app and register. Smart Siren V1.0 How to connect WIFI network.#1:
"Default mode"
Open the APP homepage, press "+" in the upper right corner to add devices select "ALL devices" select "Alarm system"
Smart Siren V1.0 Re-open the smart siren switch, re-connect the power, press and hold the REST button for 5 seconds, the indicator flashes quickly, ready to connect WFII. Smart Siren V1.0 Comfirm indicator quickly blink Enter WiFI password (2.4G WiFi only) OK Smart Siren V1.0 How to connect WIFI network,#2:
"compatibility mode"
Smart Siren V1.0 If the default way to connect WIFI is unsuccessful, you can select "AP Mode". Open the APP homepage, press "+" in the upper right corner to add devices select "ALL devices"
select "Alarm system"
Click on "AP Mode" at the top right of the app. Smart Siren V1.0 Re-open the smart siren switch, re-connect the power, press and hold the REST button for 5 seconds, Smart Siren V1.0 the indicator light flashes quickly, continue to press and hold the REST button for 5 seconds, the indicator light flashes slowly, ready to connect. Smart Siren V1.0
"Comfirm indicator slowly blink" Enter the network password (2.4G WiFi only) OK Go connect. Smart Siren V1.0 Find "SmartLife-xxx" in the wifi list of your mobile and click Connect Return to "TuyaSmart" APP. Smart Siren V1.0 WIFI connection notes:
1 Does not support 5G router.. 2 If the above two way connection both fail, please try to restart the router. 3 Siren host and mobile phone as close as possible to the router. Smart Siren V1.0 Add detectors and remotes:
Click on the APP homepage "accessories" select
"The detector" or "The control" click on "add"
Smart Siren V1.0 Click "OK" smart siren light keep on accessories send signals smart siren light flash 3 times, adding is successful. Smart Siren V1.0 Edit the accessory name:
In order to make it easier to distinguish different alarm events, you can edit the accessories name
(within 20 characters). Smart Siren V1.0 Smart Siren V1.0 Specifications:
Arm: alarm with soud and light flash Home Arm: only light flash to alarm Disarm: only SOS alarm available Remote controls: max 8 Detectors: max 24 Volume: high / medium / low Beep time: 1-180 seconds adjustable Timing control: arm / home arm / disarm Accessories frequency: 433Mhz (can be customized to any frequency between 300-912M) Smart Siren V1.0 FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference.
(2)This device must accept any interference received, including interference that may cause undesired operation. 2.Changes or modifications not expressly approved by the party responsible forcompliance could void the users authority to operate the equipment. Note:This equipment has been tested and found to comply with the limits for a class Bdigital device,pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Smart Siren V1.0 This equipment generates uses and can radiate radio frequence energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not accor in a particular installation.if this equipmemt does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an autlet on a circuit different from that to which the receiver is connectec. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be Smart Siren V1.0 installed and operated with minimum distance 20cm between the radiator & your body.
--This device is acting as slave and operating in the 2.4 GHzband. Ad Hoc function is supported but not able to operate on non-US frequencies. Operation of this device is restricted to indoor use only. FCC ID: 2AS8R-V18