all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 2.09 MiB | ||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | ID Label/Location Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | RF Exposure Info | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User Manual | Users Manual | 2.09 MiB |
Doro PhoneEasy 409s gsm
English 1. Side key (volume) 2. Display 3. Left soft key 4. Call key 5. 1 / Voice mail 6. Numeric keypad 7. #%JCPIGRTQNG 8. End call/Power on/off 9. Arrow keys 10. Right soft key 20 11. Charging contacts, for use with charging stand (not included) 12. Emergency call key 13. Battery cover 14. Headset socket 15. Charging socket 16. Loudspeaker 17. Microphone 18. Led light (Battery level low) 19. Led light (New message) 20. Lanyard English Contents Installation . 3 Installing the SIM card and battery . 3 Charging . 4 Phone indicators . 5 Operation . 6 Activating the phone . 6 Making a call . 7 Making a call from the Phonebook . 7 Receiving a call . 7 Volume control . 7 Display symbols . 8 Additional functions . 9 Call options . 9 Call waiting . 10 Call information . 10 Call log . 10 Phonebook . 11 Silent mode . 13 Headset . 13 SOS calls . 14 Emergency Call key . 14 Games . 15 Alarm . 15 Calendar . 16 Calculator . 16 Text input . 17 SMS messaging . 18 Creating and sending SMS . 18 Incoming SMS (Inbox) . 19 Outgoing SMS (Outbox) . 19 1 English Settings . 21 Time and date . 21 User setup . 22 Tone settings (rings & tones) . 24 Silent . 25 Blocking functions . 25 Emergency . 26 Voice mail . 27 Speed dial . 28 Call setup . 29 SMS settings . 30 Network setup . 32 Services . 32 Security settings . 32 Safety instructions . 34 Troubleshooting . 37 Care and maintenance . 39 Warranty and technical data . 40 2 English Installation Warning!
Turn off the phone and disconnect the charger before removing the battery cover. Installing the SIM card and battery The SIM card holder is located behind the battery. 1. Remove the battery cover by pressing it carefully down and sliding away from the emergency call key. 2. Remove the battery if it is already installed. 3. Press lightly on the cardholder and carefully slide it towards the emergency call key. 4. The SIM card holder can now be folded into an upright position. 5. Placing the SIM-card on the marked area of the compartment. Make sure that the SIM cards contacts are facing downwards and that the cut-off corner is placed accordingly with the marked area. See picture. Take care not to scratch or bend the contacts on the SIM card. 6. Fold the SIM-card holder down and carefully slide it away from the emergency call key until it clicks into place. 7. Insert the battery by sliding it into the battery compartment with the contacts facing towards the emergency call key. 8. Replace the battery cover until it clicks into place. 3 Charging English Warning!
Only use batteries, charger and accessories that have been approved for use with this particular model. Connecting other accessories may be dangerous and may invalidate the phones type approval and guarantee. is displayed and a warning When the battery is running low, signal is heard. To charge the battery, connect the mains adapter to the wall socket and to the charging socket y.
KUFKURNC[GFDTKG[YJGPVJGEJCTIGTKUEQPPGEVGFVQVJG
when it is disconnected. The battery charge phone, and indicator will be animated while charging. It takes approximately 3 hours to fully charge the battery. is displayed when charging is completed. If the phone is turned off when the charger is connected to the phone only the battery charge status indicator will be shown in the display. Note!
To save power the LCD backlight goes off after a short while but the phone is still charging. Press any key to illuminate the display. Full battery capacity will not be reached until the battery has been charged 34 times. Batteries degrade over time, which means that call time and standby time will normally decrease with regular use. 4 English Save energy When you have fully charged the battery and disconnected the charger from the device, unplug the charger from the wall outlet. Phone indicators When 5CUJGU[QWJCXGCPGYOGUUCIGQTCOKUUGFECNN
When ]CUJGUVJGDCVVGTKGUKUTWPPKPINQY
5 English Operation Activating the phone Press and hold the red button The following messages may be displayed:
on the phone to turn it on/off. SIM card missing or incorrectly inserted. SIM card damaged or not valid. If the SIM card is valid but protected with a PIN code (Personal
+FGPVKECVKQP0WODGTPIN: is displayed. Enter the PIN code and press OK (
Delete with Clear (
upper left corner of keypad). upper right corner of keypad). Note!
If PIN and PUK codes were not provided with your SIM card, please contact your network operator. Attempts: # shows the number of PIN attempts left. When no more attempts remain, SIM blocked is displayed. The SIM card must now be unlocked with the PUK code (Personal Unblocking Key).
'PVGTVJG27-EQFGCPFEQPTOYKVJOK.
'PVGTCPGY2+0EQFGCPFEQPTOYKVJOK. Changing the language, time and date The default language is determined by the SIM card. See Settings on how to change language, time and date. 6 English Making a call 1. Enter the phone number. Delete with Clear. 2. Press q to dial. Press Abort to cancel dialling. 3. Press L to end the call. Note!
When making international calls, press * twice for the KPVGTPCVKQPCNRTGZ #NYC[UWUGq qDGHQTGVJGEQWPVT[
code (instead of 00 or similar) for best operation. Making a call from the Phonebook 1. Press Name to open the phonebook. 2. Use the arrow keys
/
to scroll through the phonebook, or quick search by pressing the key corresponding VQVJGTUVNGVVGTQHVJGGPVT[UGG6GZVKPRWV. 3. Press Call to dial the selected entry, or press Back to return to standby mode. Receiving a call 1. Press q to answer, or press Silent to switch off the ring signal and then Reject to reject the call (busy signal). Alternatively, press L to reject the call directly. 2. Press L to end the call. See also Call options. Volume control Use the side keys +/ to adjust the sound volume during a call. The volume level is indicated on the display. 7 English Display symbols Signal strength Ring only Ring + vibration Vibration only Alarm active Headset connected Battery level New SMS Silent Roaming (in other network) SIM card missing Charger connected SIM card error Charger disconnected Mute Headset connected New SMS message Headset disconnected SOS calls only 1-
EQPTOGF Query Battery level low Calling Incoming call Searching Handsfree on Handsfree off Warning Error Charging (animated) Call ended Missed call Progressing (animated) Call on-hold 8 English Additional functions Call options During a call the soft keys1 give access to additional functions:
Options (left soft key) A menu with the following options is displayed:
Hold single call Hold the current call End single call New call Phonebook Msg centre Mute End the current call (same as L) Call another number (three-party call) Search the phonebook Write or read SMS messages. Disable the microphone SPK on (right soft key) Activates handsfree mode, which allows you to speak without holding the phone. Speak clearly into the microphone at a maximum distance of 1 meter (3 feet). Use the side keys +/ to adjust the loudspeaker volume. Press SPK off to return to normal mode. Note!
The handsfree function allows only one person at a time to talk. Switching between talk/listen is triggered by the sound of the person talking. Loud noises (music, etc.) in the background may interfere with the handsfree function. 1 Soft keys have multiple functions. The current key function is shown above the soft key on the display. 9 English Call waiting An alert tone will be heard if there is an incoming call while talking. To put the current call on hold and answer the incoming call, press Options. This service must be activated, see Settings/Call setup. Call information During a call, the called or calling phone number and the elapsed call time is displayed. If the identity of the caller is withheld, Unknown is displayed. Call log Answered, missed, and outgoing calls are saved in a combined call log. 20 calls of each type can be stored in the log. For multiple calls related to the same number, only the most recent call is saved. Retrieving and dialling 1. Press q. Alternatively press Menu, scroll to and press OK. 2. Use the arrow keys
/
to scroll through the call list.
= Incoming call
= Outgoing call
= Missed call 3. Press q to dial the number or press Options for the following settings:
View Delete Delete all Save Show details for the selected call Delete the call Delete all calls in the call log Save the number in the Phonebook 10 English Phonebook The phonebook can store 100 entries with 3 phone numbers in each entry. Creating a phonebook entry 1. Press Menu, scroll to 2. Select -New contact- and press Add. 3. Enter a name for the contact, see 6GZVKPRWV. Delete with Clear. to select Mobile, Home number or 2IFH
4. Use number, and enter the phone number(s), then press Save. and press OK.
/
5. Press L to return to standby mode. Note!
(QTKPVGTPCVKQPCNRJQPGPWODGTUCNYC[UWUGq qDGHQTGVJG
country code (instead of 00 or similar) for best operation. Managing phonebook entries 1. Press Menu, scroll to 2. Select an entry and press Options. 3. Select one of the following options and press OK. View Show details for the selected contact. and press OK. to move the cursor. Delete with Clear.
/
Edit 1. Use 2. Press Save. Add new See Creating a phonebook entry. Call Press OK to call the contact. 11 English Send SMS Press OK to write a SMS message, see SMS messaging. Top 10 setting 5GVVJGGPVT[CUQPGQHVJGTUVPWODGTUNKUVGFKPVJG
phonebook. 1. Select one of the empty entries and press Add. 2. Use the arrow keys to scroll through the
/
phonebook, or quick search by pressing the key corresponding VQVJGTUVNGVVGTQHVJGGPVT[
3. Press OK to save the selected entry, or press Back to return to the menu. To delete a Top 10 entry, select the entry in the Top 10 list and press Options, then Delete. Delete Press OK to delete the selected phonebook entry. Press Yes to EQPTOQTNo to abort. Delete all Select From SIM or From Phone and press OK to delete all phonebook entries from the SIM card or phone memory. Enter the phone code and press OKVQEQPTO6JGFGHCWNV
Phone code is 1234. Copy all Select From SIM and press OK to copy all phonebook entries from the SIM card to the phone memory. Press YesVQEQPTOQT
No to abort. Select From Phone and press OK to copy all phonebook entries from the phone memory to the SIM card. Press YesVQEQPTOQT
No to abort. 12 English Storage Select SIM or Phone (default) and press OK to select the default storage for new phonebook entries. Phone SIM 100 contacts with 3 phone numbers each Mobile, Home number or 2IFHQXPEHU. 1 phone number per contact. Number of entries and length of the phone numbers/contacts that can be stored will vary depending on SIM card. Send vCard Select Send by SMS and press OK to send the selected phonebook entry as a vCard via SMS. Enter the phone number of the recipient (or press Search) and press OK to send. Silent mode 5KNGPVOQFGKUCZGFRTQNGYKVJ5/5CPFTKPIUKIPCNUFKUCDNGF
while vibration and key tone settings are unchanged. Press and hold # to activate/deactivate Silent mode. See also Settings. Headset When a headset is connected, the internal microphone in the phone is automatically disconnected. When receiving a call you can use the answer key on the headset cable to answer and end calls. Warning!
Using a headset at high volume can damage your hearing. Adjust the sound volume carefully when using a headset. 13 English SOS calls As long as the phone is switched on, it is possible to place an SOS call by entering the main local emergency number followed by q. Some networks accept calls to SOS numbers without a valid SIM card. Contact your network operator for more information. Emergency Call key The Emergency Call function must be activated before use. See Settings on how to activate this function as described below or with 3 key presses, how to enter Emergency Numbers, and how to edit the emergency SMS message. To make an emergency call, press and hold the Emergency Call key on the back of the phone for 3 seconds, or press it two times within 1 second. The phone will send an emergency SMS text message to all phone numbers in the Emergency numbers list. 6JGRJQPGYKNNVJGPFKCNVJGTUVPWODGTQPVJGNKUV+HVJGECNN
is not answered within 25 seconds, the next number is dialled. Dialling is repeated 3 times or until the call is answered, or until L is pressed. Warning:
Do not hold the device near your ear when the handsfree mode is in use, because the volume may be extremely loud. Note!
When an emergency call is activated the phone is pre-set to handsfree mode.
#WVQOCVKEECNNUVQQHEKCNGOGTIGPE[PWODGTU
GI
999, 911) are normally not allowed. Do not save such numbers in the list of numbers to be called automatically. Some private security companies can accept automatic calls from their clients. Always contact the security company before programming in its number. 14 English Games 1. Press Menu, scroll to 2. Select a game (e.g. Robot) then press OK for the following and press OK. settings:
Start game Game level Best grades Help Press OK to start a new game. 5GNGEVFKHEWNV[NGXGNCPFRTGUUOK. Shows your best results. Press Back to return to the menu or Reset to reset the scores. Shows instructions for the game. Press Back to return to the menu. and press OK. Alarm 1. Press Menu, scroll to 2. Select On and press OK. 3. Enter the alarm time using the keypad, then press OK. 4. For a single occurence, select Single and press Save. 5. For a repeated alarm, select Repeated and press OK. Scroll through the list of weekdays and press On/Off to enable/disable the alarm for each weekday, then press Save. 6. To edit an alarm, press Edit, then press OK. 7. To stop the alarm, press Off. The alarm is now deleted. Note!
The alarm will work even when the phone is switched off. Do not press Yes when wireless phone use is prohibited or when it may cause interference or danger. When the alarm goes off a signal will sound. Press Stop to turn off the alarm or press Snooze to repeat the alarm after 9 minutes. 15 English and press OK. Calendar 1. Press Menu, scroll to 2. Select Options. 3. Select one of the following options and press OK. View tasks Show tasks for the selected date. Add task 1. Enter a date for the task, then press 2. Enter a time for the task, then press 3. Press Edit, enter a description for the task (see 6GZVKPRWV),
. then press Done. 4. Press Save to save the task. At the recorded date/time, an alert tone will be played and the task description will be shown on the display. Jump to date Enter the date and press OK. Note!
The calendar will work even when the phone is switched off. Do not press Yes when wireless phone use is prohibited or when it may cause interference or danger. Calculator The Calculator can perform basic math operations. 1. Press Menu, scroll to 2. 'PVGTVJGTUVPWODGT7UG# to enter decimal points. 3. Use the arrow keys to select an operation (+, -, x, ) and and press OK. press OK. 4. Enter the next number and press OK. 5. Repeat steps 24 as necessary. Select = and press OK to calculate the result. 16 English Text input Text is entered by pressing the numerical keys repeatedly to select characters. When writing SMS messages in some languages you can use the Smart ABC (eZiType) input method which uses a dictionary to suggest words. See Settings on how to change input method. Entering text Press the key repeatedly until the desired character is shown. Wait a few seconds before entering the next character. Press * for a list of special characters. Select the desired character and press OK to enter it. Use the side keys +/ or the text. Press # to cycle upper case, lower case and numerals. to move the cursor within
/
Entering text with Smart ABC Press each key once, even if the displayed character is not the one you want. The dictionary will suggest words based on the keys you have pressed. Use the arrow keys to select a word, then press OK and continue with the next word. If none of the suggested words are correct, press # to change to manual input mode. The icon on the top left of the display indicates the input mode:
eZi ABC eZi abc ABC abc 123 UPPER CASE with SmartABC lower case with SmartABC UPPER CASE lower case Numerals 17 English SMS messaging Creating and sending SMS 1. Press Menu, scroll to 2. Select Write message and press OK. 3. Type your message (see 6GZVKPRWV) then press Done. 4. Select one of the sending options below and press OK to and press OK. EQPTO
Save and send Send only Send to many Send the message and save it in the Outbox Send the message without saving Add more recipients for the message If Send to many was selected, do the following:
1. Select Recipients and press OK. 2. Select one of the empty entries and press Edit. 3. Enter a phone number or press Search to open the phonebook. After entering or selecting a number, press OK. 4. Repeat step 23 to add additional recipients. 9JGPPKUJGFRTGUUDone. Note!
(QTKPVGTPCVKQPCNRJQPGPWODGTUCNYC[UWUGq qDGHQTGVJG
country code (instead of 00 or similar) for best operation. 18 English Incoming SMS (Inbox) 1. Press Menu, scroll to 2. Select Inbox and press OK. 3. Select a message from the list and press Read. and press OK. Use
/
to scroll the message up/down. 4. Press Options, see 1WVIQKPI5/5
1WVDQZ. Outgoing SMS (Outbox) 1. Press Menu, scroll to 2. Select Outbox and press OK. 3. Select a message and press OK. Use and press OK.
/
to scroll the message up/down. 4. Press Options. Send (Outbox) Select one of the sending options and press OKVQEQPTO(see Creating and sending SMS). Reply (Inbox) Type your reply, then press Done. The message will be sent immediately. 19 English Call Press OK to call the contact. Delete Press Yes to delete the message, or No to return to the menu. Edit Edit the message, then press Done to show the sending options
(see Creating and sending SMS). Forward (Inbox) Forward a message from your Inbox. Press Done to show the sending options. Delete all Press Yes to delete all messages in the Inbox. Press No to return to the menu. Use number Displays all phone numbers contained in the message as well as the number of the sender. 1. Use the arrow keys to select one of the displayed numbers. 2. Press Options. 3. Select one of the following options and press OK. Call Save Send SMS Call the selected number Save the number in the phonebook Write a new SMS message 20 English Settings and press OK. Note!
The settings described in this chapter are carried out in standby mode. Time and date Setting the time and date 1. Press Menu, scroll to 2. Select Time & date and press OK. 3. Select Set time and press OK. 4. Enter the time (HH:MM), then press OK. 5. Select Set date and press OK. 6. Enter the date (DD/MM/YYYY), then press OK. Setting the time/date format 1. Press Menu, scroll to 2. Select Time & date and press OK. 3. Select Set format and press OK. 4. Select Time Format and press OK. 5. Select 12 hours or 24 hours and press OK. 6. Select Date Format and press OK. 7. Select the desired date format and press OK. Setting Auto time on/off 1. Press Menu, scroll to 2. Select Time & date and press OK. 3. Select Auto time and press OK. 4. Select On/Off and press OK. and press OK. and press OK. 21 English and press OK. To set the phone to automatically update the time and date according to the current time zone, select On. Automatic update of date and time does not change the time you have set for the alarm clock, calendar or the alarm notes. They are in local time. Updating may cause some alarms you have set to expire. User setup Language The default language for the phone menus, messages etc. is determined by the SIM card. You can change this to any other language supported by the phone. 1. Press Menu, scroll to 2. Select User setup and press OK. 3. Select Language and press OK. 4. Scroll up/down to select a language, then press OK. Wallpaper You can select from 8 different display backgrounds. 1. Press Menu, scroll to 2. Select User setup and press OK. 3. Select Wallpaper and press OK. 4. Scroll up/down to display the available wallpapers. 5. Press OKVQEQPTOQTBack to discard changes. Idle display In standby mode the display can present date, time, and the connected network, or just the time. 1. Press Menu, scroll to 2. Select User setup and press OK. 3. Select Idle display and press OK. 4. Select Clock only or All info and press OK. and press OK. and press OK. 22 English Owner number The phone numbers assigned to your SIM card are saved in Owner numbers if this is allowed by the card. To view/edit/delete the numbers:
1. Press Menu, scroll to 2. Select User setup and press OK. 3. Select Owner number and press OK. See Phone book on how to add names/numbers. To edit or delete an existing entry, select it and press Options, then select Edit or Delete and press OK. and press OK. and press OK. LCD backlight Sets the delay time before the display backlight is turned off. 1. Press Menu, scroll to 2. Select User setup and press OK. 3. Select LCD backlight and press OK. 4. Select 15 sec., 30 sec. or 1 min. and press OK. Audio setup
+H[QWWUGJGCTKPICKFQTJCXGJGCTKPIFKHEWNVKGUYJGPWUKPIVJG
telephone in noisy environment, you can customize the phones audio settings. and press OK. 1. Press Menu, scroll to 2. Select User setup and press OK. 3. Select Audio setup and press OK. 4. Select one of the following options and press OK. Normal High For normal hearing in normal conditions. For mild hearing impairment or usage in noisy environment. 23 English Tone settings (rings & tones) Tone setup 1. Press Menu, scroll to 2. Select Tone settings and press OK. 3. Select Tone setup and press OK. 4. Select Ring Tone and press OK. 5. Select one of the available tones, the tone will be played. and press OK. Press OKVQEQPTOQTRTGUUBack to discard changes. 6. Set up the Alarm, Opening tone, Closing tone, Message tone and Keypad tone in the same way. and press OK. Ringtone volume 1. Press Menu, scroll to 2. Select Tone settings and press OK. 3. Select Volume and press OK. 4. Scroll Alert type (ring/vibrate) Incoming calls can be signalled by a ring tone and/or vibration. to change the ring volume, then press OK.
/
and press OK. 1. Press Menu, scroll to 2. Select Tone settings and press OK. 3. Select Alert type and press OK. 4. Select the desired signalling mode and press OK. Ring only Vib. only Vib & ring Vib -> ring Ring tone only Vibration only Vibration and ring tone Starts with vibration and adds ring tone after a short while 24 English Warning and error tones Warning and error tones are used to alert the user of low battery power, phone and SIM card errors, etc. and press OK. 1. Press Menu, scroll to 2. Select Tone settings and press OK. 3. Select Extra tone and press OK. 4. Select Warning and press On/Off to enable/disable it. 5. Select Error and press On/Off to enable/disable it. 6. Press Done to save. Silent 5KNGPVRTQNGKUCZGFRTQNGYKVJ5/5CPFTKPIUKIPCNUFKUCDNGF
while vibration and key tone settings are unchanged. and press OK. 1. Press Menu, scroll to 2. Select Silent and press OK. 3. Select On/Off to enable/disable it. 4. Press OK to save. Alternatively press and hold # to activate/deactivate Silent. Blocking functions You can disable some functions to simplify use of the phone. 1. Press Menu, scroll to 2. Select Block function and press OK. 3. Select each function you want to disable and press On. 4. Press DoneVQEQPTO
and press OK. 25 English Emergency Settings for the Emergency Call key function. See also Operation/Emergency call. 1. Press Menu, scroll to 2. Select Emergency and press OK for the following settings:
Activation Select one of the following options and press OK. Off and press OK. Emergency call key disabled. Emergency Call key enabled. To activate, hold key for >3 seconds, or press 2 times within 1 second. Emergency Call key enabled. To activate, press key 3 times within 1 second. On Normal On (3) Numbers list The list of numbers that will be called when the Emergency Call key is pressed. Some private security companies can accept automatic calls from their clients. Always contact the security company before programming in its number. and press OK. 1. Press Menu, scroll to 2. Select Emergency and press OK. 3. Select Numbers list and press OK. 4. Select Empty and press Options. 5. Select Phonebook if you want to add a contact from the Phonebook. Alternatively press Manual. 6. Press 7. Enter the number and press Save. Repeat until you have max. 5 emergency numbers. See Phonebook on how to add names/numbers. 26 English To edit or delete an existing entry, select it and press Options, then select Edit or Delete and press OK. Message The SMS text message to be sent when the Emergency Call key is pressed. Press Edit and enter text, then press OK to save. Alarm information Please read this important safety information before enabling the Emergency function:
Be careful about including numbers with automatic answering in the call list, as the alarm sequence stops once the call is answered. Voice mail If your subscription includes an answering service, callers can leave a voicemail message when you cannot answer a call. Voice mailbox is a network service and you may need to subscribe to KVTUV(QTOQTGKPHQTOCVKQPCPFHQTVJGXQKEGOCKNDQZPWODGT
contact your service provider. 1. Press Menu, scroll to 2. Select Voice mail and press OK. 3. Select Empty and press Options. 4. Select Phonebook if you want to add a contact from the and press OK. Phonebook. Alternatively press Manual to add new. See Phonebook on how to add names/numbers. 5. Press SaveVQEQPTO
Connect to Voice mail 1. Select Options and press OK. 2. Select Connect and press OK to call the voice mailbox. Alternatively press and hold 1 to call the voice mailbox. 27 English Edit To edit an existing entry, select it and press Options, then select Edit and press OK. Delete To delete an existing entry, select it and press Options, then select Delete and press OK. Speed dial The numerical keys 0 and 29 can be used for speed dialling. and press OK. Adding speed dial numbers 1. Press Menu, scroll to 2. Select Speed dial and press OK. 3. Select 0 and press Add. 4. Select an entry from the phonebook and press OK. 5. Repeat to add speed dial entries for keys 29. To speed dial an entry, press and hold the corresponding number key. To edit an existing entry, select it and press Options, then select Edit or Delete and press OK. 28 English and press OK. Call setup Depending on network support and subscription. 1. Press Menu, scroll to 2. Select Call setup and press OK for the following settings:
Caller ID Controls display of your phone number on the recipients phone. Select an option and press OK. Set by network Hide ID Send ID Use default setting by the network Never show your number Always show your number Call waiting Select an option and press OK. See also Operation - Call waiting. Activate Deactivate Query status Enables the function Disables the function Displays if the service is active or not Call divert Set up which calls should be diverted. Select a condition and press OK, then select Activate, Deactivate or Query status (see Call waiting above) for each. Div. voice calls Div. unreach Div. no reply Divert if busy Cancel diverts Diverts all voice calls. Diverts incoming calls if the phone is turned off or out of range. Diverts incoming calls if unanswered. Diverts incoming calls if the line is busy. Do not divert calls 29 English Call barring The phone can be restricted to disallow certain types of calls. Note!
To change these settings a password is needed. Contact your network operator to get the password. Outgoing calls All calls Internat. calls Int. except home User can not call international numbers except to Press OK then select:
User can answer incoming calls but not dial out. User can not call international numbers. Incoming calls All calls When roaming Cancel all the country associated with the SIM card. Press OK then select:
User can dial out but not receive incoming calls. User can not receive incoming calls while roaming
(operating in other networks). Cancel all call barring (password needed) Answer mode Select Open to answer and press On to be able to answer incoming calls by cover opening. Select Any key and press On to be able to answer incoming calls by pressing any key. SMS settings 1. Press Menu, scroll to 2. Select Messages and press OK for the following settings:
2TQNGUGV This number is needed to use the SMS function. The number can be obtained from the network operator. 1. Add/edit the message service phone number. Use the side and press OK. keys to move the cursor. Press Clear to erase. 2. Press Save to save the new number. 30 English Memory status Displays the percentage of memory space used in the SIM card and phone memory. Pref. storage 1. Select SIM to store messages on the SIM card, or Phone to store messages in the phone memory. 2. Press OKVQEQPTO
Predictive text (Smart ABC) 1. Press On to enable Smart ABC/eZiType, see 6GZVKPRWV. 2. Select a dictionary (language) and press OKVQEQPTO
Cell information You can receive messages on various topics from your service RTQXKFGTUWEJCUYGCVJGTQTVTCHEEQPFKVKQPUKPCRCTVKEWNCT
region. For available channels and relevant channel settings, contact your service provider. Cell broadcast messages cannot be received when the device is Roaming. Select Cell information and press OK for the following settings:
Function on/off Read Languages Settings To turn information On or Off Select Read and press OK to read the message Select language and press OK Select from which channels you want to receive/
subscribe messages. Use the options Select, Add, Edit and DeleteVQFGPG[QWTEJCPPGNU 31 English and press OK. Network setup 1. Press Menu, scroll to 2. Select Network setup and press OK. 3. Select one of the following options and press OKVQEQPTO
Automatic Network is selected automatically. A list of available network operators is displayed (after a short delay). Select the desired operator and press OK. Manual Services This menu may contain pre-programmed services from your network provider. Depending on network support and subscription. Security settings 1. Press Menu, scroll to 2. Select Security and press OK. SIM lock 6JG5+/ECTFKURTQVGEVGFYKVJC2+0EQFG
2GTUQPCN+FGPVKECVKQP
Number). The phone can be set to ask for the PIN code on startup. Select On/Off and press OK to enable/disable SIM card lock. and press OK. Note!
You need to input the current PIN code to disable/enable SIM lock. Phone lock Select On/Off and press OK to enable/disable the Phone lock. Note!
You need to input the current Phone code to change this setting. The default Phone code is 1234. 32 English Fixed dial (FDN) You can restrict calls to certain numbers saved on the SIM card. The list of restricted numbers is protected by your PIN2-code. Mode Fixed numbers Select On/Off and press OK. Enter PIN2 and press OK VQEQPTO
Press Options for the following settings:
Add, Edit or Delete and press OK. Enter PIN2 and press OK VQEQPTO
Please note!
;QWECPUCXGRCTVUQHRJQPGPWODGTU(QTGZCORNGKH[QW
save 01234, allows calls to all numbers starting with 01234. It is possible to place an SOS call by entering the main local emergency number followed by qGXGPYJGPZGFFKCNKU
activated. 9JGPZGFFKCNKUCEVKXCVGF[QWCTGPQVCNNQYGFVQXKGYQT
manage any phone numbers saved on the SIM card. PIN / PIN2 / Phone password To change the PIN codes or the phone lock password:
1. 'PVGTVJGEWTTGPVEQFGCPFEQPTOYKVJOK 2. 'PVGTCPGYEQFGCPFEQPTOYKVJOK. 3. 'PVGTVJGPGYEQFGCICKPCPFEQPTOYKVJOK. Reset Resets the phone to the factory settings. Input the phone lock password and press OK to reset. 33 English Safety instructions Warning!
The unit and the accessories can contain small parts. Keep all of the equipment out of the reach of small children. The mains adapter is the disconnect device between the product and mains power. The mains socket outlet must be close to the equipment and easily accessible. Operating environment Follow the rules and laws that apply wherever you are, and always turn off the unit whenever its use is prohibited or can cause interference or hazards. Only use the unit in its normal user position. This unit complies with guidelines for radiation when it is used either in a normal position against your ear, or when it is at least 1.5 cm from your body. If the unit is carried close to your body in a case, belt holder or other holder, these holders should not contain any metal, and the product UJQWNFDGRNCEGFCVVJGFKUVCPEGHTQO[QWTDQF[URGEKGFCDQXG/CMG
sure that the distance instructions above are followed until the transfer is complete. Parts of the unit are magnetic. The unit can attract metal objects. Do not keep credit cards or other magnetic media near the unit. There is a risk that information stored on them can be erased. Medical units The use of equipment that transmits radio signals, for example, mobile RJQPGUECPKPVGTHGTGYKVJKPUWHEKGPVN[RTQVGEVGFOGFKECNGSWKROGPV
Consult a doctor or the manufacturer of the equipment to determine if it has adequate protection against external radio signals, or if you have any questions. If notices have been put up at health care facilities instructing you to turn off the unit while you are there, you should comply. Hospitals and other health care facilities sometimes use equipment that can be sensitive to external radio signals. 34 English Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of 15 cm be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. Persons with pacemakers:
r Should always keep the phone more than 15 cm from their pacemaker when the phone is turned on r Should not carry the phone in a breast pocket r Should use the ear opposite the pacemaker to minimize the potential for interference If you have any reason to suspect that interference is taking place, turn the phone off immediately. Areas with explosion risk Always turn off the unit when you are in an area where there is a risk of explosion. Follow all signs and instructions. There is a risk of explosion in places that include areas where you are normally requested to turn off
[QWTECTGPIKPG+PVJGUGCTGCUURCTMUECPECWUGGZRNQUKQPQTTGYJKEJ
can lead to personal injury or even death. 6WTPQHHVJGWPKVCVNNKPIUVCVKQPUCPFCP[QVJGTRNCEGVJCVJCUHWGN
pumps and auto repair facilities. Follow the restrictions that apply to the use of radio equipment near places where fuel is stored and sold, chemical factories and places where blasting is in progress. Areas with risk for explosion are often but not always clearly marked. This also applies to below decks on ships; the transport or storage of chemicals; vehicles that use liquid fuel (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powder. 35 English Emergency calls Important!
Mobile phones use radio signals, the mobile phone network, the terrestrial network and user-programmed functions. This means that connection cannot be guaranteed in all circumstances. Therefore, never rely only on a mobile phone for very important calls such as medical emergencies. Hearing aids This device should work with most hearing aid equipment in the market. However, full compatibility with all equipment can not be promised. Vehicles Radio signals can affect electronic systems in motor vehicles (for example, electronic fuel injection, ABS brakes, automatic cruise control, air bag systems) that have been incorrectly installed or are inadequately protected. Contact the manufacturer or its representative for more information about your vehicle or any additional equipment.
&QPQVMGGRQTVTCPURQTVCOOCDNGNKSWKFUICUGUQTGZRNQUKXGUVQIGVJGT
with the unit or its accessories. For vehicles equipped with air bags:
4GOGODGTVJCVCKTDCIUNNYKVJCKTYKVJEQPUKFGTCDNGHQTEG
&QPQVRNCEGQDLGEVUKPENWFKPIZGFQTRQTVCDNGTCFKQGSWKROGPVKPVJG
area above the airbag or the area where it might expand. Serious injuries may be caused if the mobile phone equipment is incorrectly installed and VJGCKTDCINNUYKVJCKT
+VKURTQJKDKVGFVQWUGVJGWPKVKPKIJV6WTPQHHVJGWPKVDGHQTG[QWDQCTF
a plane. Using wireless telecom units inside a plane can pose risks to air safety and interfere with telecommunications. It may also be illegal. 36 English RF exposure information (SAR) This model phone meets the governments requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless mobile phones employs a unit of OGCUWTGOGPVMPQYPCUVJG5RGEKE#DUQTRVKQP4CVGQT5#46JG
SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone VTCPUOKVVKPICVKVUJKIJGUVEGTVKGFRQYGTNGXGNKPCNNVGUVGFHTGSWGPE[
DCPFU#NVJQWIJVJG5#4KUFGVGTOKPGFCVVJGJKIJGUVEGTVKGFRQYGT
level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is 0.088 W/kg and when worn on the body, as described in this user guide, is 0.537 W/kg (Body-worn measurements differ among phone models, depending upon available enhancements and FCC requirements.) While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF GZRQUWTGIWKFGNKPGU5#4KPHQTOCVKQPQPVJKUOQFGNRJQPGKUQPNGYKVJ
the FCC and can be found under the Display Grant section of http://www. fcc.gov/oet/fccid after searching on FCC ID: WS5DORO409S For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 5/8 inch (1.5 cm) from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If you do no t use a body-worn accessory and are not holding the phone at the ear, position the handset a minimum of 5/8 inch (1.5 cm) from your body when the phone is switched on. 37 English FCC/INDUSTRY CANADA NOTICE This device complies with part 15 of the FCC Rules. This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules/
Canadian ICES-003. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
r Reorient or relocate the receiving antenna. r Increase the separation between the equipment and the receiver. r Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. r Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.
&QTQJCUPQVCRRTQXGFCP[EJCPIGUQTOQFKECVKQPUVQVJKUFGXKEGD[
VJGWUGT#P[EJCPIGUQTOQFKECVKQPUEQWNFXQKFVJGWUGToUCWVJQTKV[VQ
operate the equipment. 38 English Troubleshooting Phone cannot be switched on Battery charge low Battery incorrectly installed Failure to charge the battery Battery or charger damaged Battery recharged in temperatures
< 0C or > 40C Charger incorrectly connected to phone or power socket Standby time decreases Battery charge capacity too low Too far from base station, phone is constantly searching for signal Connect the power adapter and charge the battery for 3 hours. Check the installation of the battery. Check the battery and charger. Improve the charging environment. Check the charger connections. Install a new battery. Searching the network consumes battery power. Find a place with a stronger signal, or temporarily turn off the phone. Failure to place or receive calls Call barring activated Deactivate call barring. If this does not solve the problem, contact the network operator. PIN code not accepted Wrong PIN code entered too many times Enter the PUK code to change the PIN code, or contact the network operator. 39 SIM card error SIM card damaged SIM card incorrectly installed SIM card dirty or damp English Check the condition of the SIM card. If it is damaged, contact the network operator. Check the installation of the SIM card. Remove the card and reinstall it. Wipe the contact surfaces of the SIM card with a clean cloth. Failure to connect to network SIM card invalid No coverage of GSM service Signal too weak Contact the network operator. Contact the network operator. See Weak signal below. Weak signal Too far from base station Network congestion Try again from another location. Try calling at a later time. Echo or noise Regional problem from bad network relay Hang up and redial. This may switch to another network relay. Failure to add a contact Phonebook memory full Failure to set a function Function not supported or subscribed from network Delete contacts to free up memory. Contact the network operator. 40 English Care and maintenance Your unit is a technically advanced product and should be treated with the greatest care. Negligence may void the warranty. r Protect the unit from moisture. Rain/snowfall, moisture and all types of liquid can contain substances that corrode the electronic circuits. If the unit gets wet, you should remove the battery and allow the unit to dry completely before you replace it. r Do not use or keep the unit in dusty, dirty environments. The units moving parts and electronic components can be damaged. r Do not keep the unit in warm places. High temperatures can reduce the lifespan for electronic equipment, damage batteries and distort or melt certain plastics. r Do not keep the unit in cold places. When the unit warms up to normal temperature, condensation can form on the inside which can damage the electronic circuits. r Do not try to open the unit in any other way than that which is indicated here. r Do not drop the unit. Do not knock or shake it either. If it is treated roughly the circuits and precision mechanics can be broken. r Do not use strong chemicals to clean the unit. Do not expose your product to extreme high or low temperatures. Your phone operates best in temperature between 0 C and 40C. Minimum and maximum temperatures recommended by the manufacturer are 0C and 40C. The advice above applies to the unit, battery, mains adapter and other accessories. If the phone is not working as it should, please contact the place of purchase for service. Dont forget the receipt or a copy of the invoice. 41 English Warranty and technical data This product is guaranteed for a period of 12 months from the date of purchase. In the unlikely event of a fault occurring during this period, please contact the place of purchase. Proof of purchase is required for any service or support needed during the guarantee period. This guarantee will not apply to a fault caused by an accident or a similar incident or damage, liquid ingress, negligence, abnormal usage, non-
maintenance or any other circumstances on the users part. Furthermore, this guarantee will not apply to any fault caused by a thunderstorm or CP[QVJGTXQNVCIGWEVWCVKQPU#UCOCVVGTQHRTGECWVKQPYGTGEQOOGPF
disconnecting the charger during a thunderstorm. Batteries are consumables and are not included in any guarantee. This guarantee does not apply if batteries other than DORO original batteries are used. NOTE! This guarantee does not affect your legal (statutory) rights under your applicable national laws relating to the sale of consumer products. 5RGEKECVKQPU Network:
Dimensions: 98 mm x 51 mm x 19 mm Weight:
Battery:
Declaration of Conformity Doro hereby declares that Doro PhoneEasy 409s gsm conforms to the essential requirements and other relevant regulations contained in the Directives 1999/5/EC (R&TTE) and 2002/95/EC (RoHS). A copy of the Declaration of Conformity is available at www.doro.com/dofc 99 g (including battery) 3.7V/800 mAh Li-ion battery GSM 900/DCS1800/PCS1900 Triple Band 2009 Doro AB. All rights reserved. eZiType is a trademark of Zi Corporation. vCard is a trademark of the Internet Mail Consortium. 42 English This device have been tested to comply with the Sound Pressure Level requirement laid down in the applicable EN 50332-1 standards. Permanent hearing loss may occur if earphones or headphones are used at high volume for prolonged periods of time. Logo Warning statement:
A pleine puissance, lcoute prolonge du baladeur peut endommager loreille de lutilisateur. Caution Risk of explosion if battery replaced aced by an incorrect type. Dispose of used batteries according to the instructions. Please make sure the temperature for adapter will not be higher than 40 C Please make sure the temperature for device will not be higher than 40 C The device could be used with a separation distance of 1.5cm to the human body. The adapter shall be installed near the equipment and shall be easily accessible. Only can use adapter as below:Adatper mfg: Shenzhen Huntkey Electronics Co., Ltd. Adapter 1 model: HKA00605055-3B I/P:100-240V,50/60Hz,0.2A,O/P 5V,0.55A Adapter 2 model: HKA00605055-4B I/P:100-240V,50/60Hz,0.2A,O/P 5V,0.55A The plug considered as disconnect device of adapter 43 English 44 English (A3) Version 1.1 0700
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2011-08-30 | 1850.2 ~ 1909.8 | PCE - PCS Licensed Transmitter held to ear | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2011-08-30
|
||||
1 | Applicant's complete, legal business name |
Doro AB
|
||||
1 | FCC Registration Number (FRN) |
0022561310
|
||||
1 | Physical Address |
Jorgen Kocksgatan 1B
|
||||
1 |
Malmo, N/A
|
|||||
1 |
Sweden
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
D******@phoenix-testlab.de
|
||||
1 | TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
WS5
|
||||
1 | Equipment Product Code |
DORO409S
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C******** Z****
|
||||
1 | Title |
CEO & President
|
||||
1 | Telephone Number |
46-46********
|
||||
1 | Fax Number |
46-46********
|
||||
1 |
c******@doro.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | PCE - PCS Licensed Transmitter held to ear | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | GSM Mobile Phone | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is EIRP. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 1.5 cm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are Head: 0.088 W/kg; Body-worn: 0.537 W/kg. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SPORTON INTERNATIONAL(KUN SHAN)INC.
|
||||
1 | Name |
A**** C******
|
||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
a******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 24E | 1850.20000000 | 1909.80000000 | 0.2300000 | 0.0400000000 ppm | 246KGXW |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC