USER MANUAL El Main parameters Item No.: E354-003 Double E Material: plastic and electronic components Batteries: Car battery:1pc of 4. 8V AArechargeable battery. Remote controller battery: two pcs of 1.5V AA batteries. ON/OFF Light Forward/Backward Mute Switch Demo Turn Left/Right
| 2 | Battery Installation 1.Open the cover of battery case locates in the back of controller, inserts two pcs of 1.5VAA batteries into the battery case, and then screw the cover (Fig 2A). 2. Please screw out the cover at the back of car by screwdriver, open the cover as the arrow Screw-socket Charger Bettery Notice: This product shall be charged for two to threehours. The supporting USB charger shall not be used for other devices other than this product. 2.4GHz Auto-matching 1.After installing the batteries of tractor and remote controller, turn on the switch of both. The indicator of remote controller and the front lights of tractor would be flashing slowly, and then ata state of auto-matching.When the tractor with a sound of DI-DI, it means the auto-matching is successful. 2.One remote controller can only match with one tractor. After the success of matching, there is non-interference of each tractor. 3.If the remote controller could not find out the 2.4G signal of the tractor in 1minute, it would turn ina sleeping state(light off of the indicator). To press any key to activate. 4.To remake a pair with other tractor or remote controllers, please turn off the power of both. ry Basic operation and functions Installation Diagram Basic operation and functions Forward Backward| @ed Sie _>
Left ee S Right Che ee Hopper \aG Up ed Hopper 1 Ye Down AQ, Advanced features 1.Auto-OFF:
e After starting, the truck would automatically shut down without receiving any signal in 60 seconds. To reactivate by pressing any keys. 2.Multi-playing Function e Products could be played together at the same time since they are remote controlled by 2.4GHz frequency. Gi Recharging Notice: Please turn the power switch to OFF "position if the product will not be used for a long time. Take the batteries out of the remote controller and the truck if they will be stored fora long time. Notice 1.Don't play the toy on the road, select a safe place for operating to avoid dangerous. 2.Plays the toy in water may cause short-circuit damage. Please use the dry cloth to clean the car. 3.If abnormal speed or reaction, it may be because of insufficient battery power,Please replace new batteries. 4.Please install the battery in a correct polarity. 5.Do not mix new and old batteries together, short-circuited. 6.Don't break the remote control antenna to prevent injury. Frequency bands : 2405MHz to 2475MHz Maximum output power : -9.55dBm For EU Manufacturer : Doubleeagle Industry (China) Limited. Address : Xingda Industrial Park, Chenghai District, Shantou City, Guangdong Province, China. Importer : JAMARA e.K. Address : Inh. Manuel Natterer Am Lauerbuhl 5 - DE-88317 Aichstetten Germany CHOKING HAZARD-small parts, not for children under 3 years. changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.