E568-0035% MC tt HA 5 (2. 4G) (1903hk) 2019-05-06 USER MANUAL El Main parameters DOUBLE E Item No.: E568-003 Material: plastic and electronic components Batteries: Car battery: 4.8V AA rechargeable battery ;
Remote controller battery: 2 pcs of 1.5V AA batteries. Indicator Horn button Mute switch button Release/Hammer Button
(DIY with Grab Jaw/Hammer) Right Trigger Drop button of large arm Unloading Rise button of large arm Capture button
(DIY with Grab Jaw) Left Trigger Rise button of small arm Left Rotation Drop button of small arm Right Rotation
. 7 Excavating Bi Battery Installation 1.Open the cover of battery case locates in the back of controller, inserts 2 pcs of 1.5VAA batteries into the battery case, and then screw the cover (Fig 2A). 2.Please screw out the cover at the back of car by screwdriver. open the cover as the arrow showed, insert 1pc of 4.8 VAA battery, then screw the cover (Fig 2B). Charger
=r @
The output voltage is === DC5V The toy is to be connected to Class II epuipment bearing the symbol.) Notice: This product shall be charged for four to five hours. The supporting USB charger shall not be used for other devices other than this product. Basic Operation and Function 1.After installing the batteries of truck and remote controller, open the switch of both. The indicator of remote controller and the fronts lights of truck would be flashing slowly, and then ata state of auto-coded. When the car with a sound of DI-DI, it means the auto-
coding is successfully. 2.One remote controller only could code one car. After the success of coding, there is non-interference of each car. 3.1f the remote controller could not find out the 2.4G signal of the car in 1minute, it would turnin a sleeping state(light off of the indicator). To press any key to activate. 1 4.To remake a pair with other cars or remote controllers after turning off the power of both. 1.Horn button yy 2.Mute function gay 3.Forward y="~
4.Backward ome 5.Turn left 6.Turn Right ee 4 7.Excavating ye 8.Unloading y=
9. Left Rotation ame 10.Right Rotation yee 11.Rise button = =
of small arm wy ~g 12.Drop button 2% = ao of small arm vi WJ 3 s f a en 13.Rise button ee of large arm iw Ge 14.Drop button a of large arm Ex, Advanced features 1.Auto-OFF:
e After starting, the excavator would automatically shut down without receiving any signal in 60 seconds. To reactivate by pressing any keys. 2.Multi-playing Function
@ Many productions could be played together at the same time since they are remote controlled by 2.4Ghz frequency. G Recharging Notice: Please turn the power switch to OFF position if the product will not be used for a long time. Take the batteries out of the remote controller and the excavator if they are stored for a long time. Notice 1.Don't play the toy on the road, select a safe place for operating to avoid dangerous. 2.Plays the toy in water may cause short-circuit damage. Please use the dry cloth to clean the car. 3.If abnormal speed or reaction, it may be because of insufficient battery power, please charge the battery. 4.The batteries should be charged under adult supervision. Please use the batteries recommended. 5.Please install the battery in a correct polarity. 6.Do not mix new and old batteries together, short-circuited. 3 7.Please charge the battery before initial use. 8.Please check the plug. case and other units of charger regularly to make sure that it is not broken.Don't use again if you find abnormality of the charger. 9.Please do not connect the product to different performance power. CHOKING HAZARD-small parts, not for children under 3 years. Specifications colors and contents may vary from illustrations. Operation Frequency: 2405MHz-2475MHz Max. Output Power: -3.09dBm (for EU compliance) Manufacturer: Doubleeagle Industry(China)Limited. Address: Xingda Industrial Park , Chenghai District, Shantou City, Guangdong Province , China. Importer: JAMARA e.K. Address: Inh .Manu el Natterer Am Lauerbuhl5-DE-88317 Aichstetten Germany CHOKING HAZARD-small parts , not for children under 3 years. changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
--- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. 06.03.00E568.03