CORE
INNOVATIONS
TM
CLC14364
User Manual
14.1” Laptop with Windows™ 10 S
Read Before Use
meters).
1. This laptop works best in non-tropical areas below 6560 feet (2000
2. Protect your device from impact from bumps and falls.
3. Do not use this device for extended periods of time in environments that
are either too cold, too hot, too humid or too dusty. Do not expose the
device to direct sunlight.
4. Avoid using this device in strong magnetic and static environments as
much as possible.
5. If the device comes into contact with water or any other liquid, power
it off immediately and wait for it to dry completely before turning it on
again.
6. Do not clean the device with any cleaning products containing
chemicals, to avoid damage caused by corrosion and dampness. When
cleaning is necessary, use a dry, soft cloth.
7. The company shall not be held responsible for the loss or deletion of
material inside the device caused by abnormal software and hardware
operation, maintenance or any other accidents.
8. Please regularly back up important data and files to avoid loss.
9. Please do not disassemble the device by yourself; doing so will void the
warranty.
2
Unit at a Glance
6
5
6
2
FRONT
TOP
14
BOTTOM
14
10
8
9
7
13
12
11
LEFT
RIGHT
1. Power Button: Turn your device on or off. Use to set your device to
Sleep or to wake it from Sleep.
2. Front Camera: Take photos and videos.
3. Touchpad: Use the touchpad to move your cursor.
1
4
3
3
Unit at a Glance (Continued)
4. Keyboard: Use the keyboard for typing.
5. Indicators:
1 - The first light from the left indicates that the Power is on.
2 - The middle light indicates that Caps Lock is on.
3 - The third is the Num Lock indicator. When this light is on, you may
use the secondary keys on your keyboard.
6. Microphone: Transmits audio signals.
7. Charging Indicator: Red light illuminates when connected to a power
adapter.
8. Charging Port: 12V/2A charger.
9. USB Input: Connect external USB devices.
10. Mini-HDMI® Output: Connect your laptop to a monitor, TV or
other HDMI®-enabled device.
11. USB Input: Connect external USB devices.
12. Headphone Jack: Transmit audio signals to speakers or headphones.
13. Micro SD Card Slot: Built-in memory card reader slot that supports
14. Speakers: Built-in 2x1W speakers allow you to playback sound without
Micro SD format up to 64GB.
connecting external devices.
Getting Started
Fully charge your laptop for at least six hours before initial use. Use the
included wall charger. The battery indicator will confirm that your device is
charging.
Turn your laptop on by pressing and holding the power key for two seconds.
Once the screen is loaded, connect to your Wi-Fi® network. To wake the
screen from sleep, press the power key and the lock screen should appear.
Next, press the upwards arrow key () and log in. Sign in if your laptop
requires a password to log in.
Use your information to create a user account. You can use this
account to create, modify or remove other accounts on this
device.
4
Interface Introduction
Windows™ 10 S Start Menu
You will see many applications fixed on the Start menu. These apps are
displayed in the form of magnets, allowing you to easily visit programs at the
click of a button. You will need to log in to your Microsoft™ account before
the applications can fully run.
Learn more about Windows™ 10 S at:
https://www.microsoft.com/en-us/windows/s-mode
5
Windows™ 10 in S Mode
Microsoft™-Verified Security
With Windows™ 10 in S mode, your favorite applications, such as Office,
Evernote and Spotify are available from the Microsoft™ Store where they’re
Microsoft™-verified for security. Feel secure when you’re online. Microsoft
Edge™, your default browser, gives you more protection against phishing
and socially-engineered malware than Chrome or Firefox.
Switching out of S Mode
Windows™ 10 in S mode is designed for security and performance,
exclusively running apps from the Microsoft™ Store. If you want to install an
app that isn’t available in the Microsoft™ Store, you’ll need to switch out of
S mode.
Note: Switching out of S mode is one-way. If you make the switch, you won’t
be able to go back to Windows™ 10 in S mode. You may switch back only if
a software upgrade is made available. We recommend that you back up all
your files onto an external hard drive before switching OS. Switching out of S
mode is free of charge.
To switch out of S Mode, follow these steps:
1. Make sure you are logged into the Microsoft™ Store.
6
Windows™ 10 in S Mode (Continued)
2. In the Microsoft™ Store, search for “Switch out of S Mode.”
3. Click on the Get button. Once the software has downloaded, click on the
Install button and follow the onscreen instructions to complete the setup.
7
Applications Introduction
In addition to the applications already fixed on the Start Menu, all other apps
can be accessed from your laptop’s homepage. To add multiple apps to the
Start Menu:
1. Right click on the app icon you wish to pin to the Start Menu
2. Select Pin to Start
Conversely, if you want to remove an app from the Start Menu:
1. Right click on the app icon
2. Select Unpin from Start
8
Downloading Apps
You can download more apps from the Microsoft™ Store found on
the Windows™ Start Menu.
Note: You need a Microsoft™ account to be able to download apps. You can
create an account by logging on to https://account.microsoft.com/account
Once you’ve created an account, go to the Microsoft™ Store app on
your laptop and sign in by clicking the icon.
Menu Bar
The Menu bar is located within your Windows™ Start Menu, found at the
bottom of your screen.
PC: Allows you to set up, lock and
sign out
Settings: Setup and customize your
device
Documents: Opens the Documents
folder in your laptop
Power: Sleep, shutdown or restart
your device
Pictures: Opens the Pictures folder
in your laptop
9
Search
The Search Bar can be found in your Start Menu. Use it to find documents
or files stored in your device. You can also use the Search Bar to search for
anything on the Web when an Internet connection has been setup.
You can see notifications on the Action Center.
10
Cortana™
What is Cortana™?
Cortana™ is your virtual assistant. She’ll help you get things done. The more
you use Cortana™, the more personalized your experience will be.
To get started, type a question in the search box, or select the microphone
and talk to Cortana™. (If you would like to talk to Cortana, make sure your
mic is enabled.)
You can also set Cortana™ to respond to "Hey Cortana™" from the Settings
Menu by clicking on Start > Cortana™ > Settings > Cortana & Search
Settings.
Here are some things Cortana™ can do for you:
● Give you reminders based on time, places, or people.
● Track packages, teams, interests, and flights.
● Send emails and texts.
● Manage your calendar and keep you up to date.
● Create and manage lists.
● Find facts, files, places, and info.
● Open any app on your system.
Note: Cortana™ is only available in certain countries/regions, and some
Cortana™ features might not be available everywhere.
11
Multitasking
Multitasking allows you to use multiple desktops to organize your files and
documents more efficiently.
1. Click the Task View button next to the search bar, or press Alt+Tab on
your keyboard to switch between or view apps.
2. To use two or more apps at a time, grab the top of an app window and
drag it to the side. Then choose another app and it’ll automatically snap
into place.
3. Create different desktops for home and work by selecting Task View >
New Desktop, and then opening the apps you want to use.
Basic Operations
Clicking on the Power Button gives
you access to the Sleep, Restart, and
Shutdown operations. Briefly press
the Power Button on your keyboard to
enter Sleep Mode.
12
Action Center
The Action Center allows you to view and manage your accumulated
notifications. It also gives you quick access to commonly customized
settings.
To open the Action Center, click on the Windows Key (
while pressing the letter A.
) on your keyboard
Bluetooth: Turn Bluetooth® on or off.
Network: Connect to a Wi-Fi® network.
Location: Enable or disable location settings.
Nightlight: Shift your display to reduce blue light and emit warmer colors to
help you get a better night’s sleep.
Settings: Access all device settings.
Connect: Connect to a wireless display or audio device.
Battery Saver: Activate to save battery.
Airplane Mode: Select to activate airplane mode.
13
Battery
You can view your battery status at the lower right corner of the Lock Screen
or the lower right corner of Desktop Taskbar.
14
14
Connecting to Devices
You can connect your laptop to different devices with a USB cable or
wirelessly via Bluetooth®/Wi-Fi®.
Pair with a Bluetooth® Device
1. Turn on your Bluetooth® device to make it discoverable.
2. Open the Action Center. Click and hold “Bluetooth”. Select “Go To
Settings”.
3. Wait for your laptop to search for Bluetooth® devices. When the
Bluetooth® device appears, follow the on-screen instructions to finish
pairing.
Setup a Printer or Scanner
Click “All Settings” in the Action Center > Devices.
Available printers and scanners on your Wi-Fi® network will be listed. If you
do not see your printer, click "The printer that I want isn't listed" and follow
the prompts.
Project to a Second Screen
Connect your laptop to a TV or monitor via HDMI® to watch movies, work
with multiple apps, share presentations and more.
Connect to a Wireless Display
1. Open the Action Center and click "Connect".
2. Your laptop will search for wireless display and audio devices.
3. Choose the wireless device you wish to connect to and follow the on-
screen instructions.
CLC14364
15
Personalizing Your Laptop
Create Tiles
Pin your favorite apps and websites to the Start Screen.
To pin an app:
Click and hold the desired app, then select "Pin to Taskbar".
To pin a website (Microsoft™ Edge Browser only):
Go to the website using the installed Micrisoft™ Edge Browser. Click (...) on
the right hand side. Select "Pin to Start".
Customize Your Tiles
Customize your Start Screen by changing around the tiles any way you like.
To move a tile: Click and drag to where you want it.
To resize a tile: Click and hold a tile, select "Resize" (...), and choose the
size you want for the tile.
To unpin a tile from Start: Click and hold a tile. Select "Unpin from
Start" (...), then "Remove the Tile".
16
Personalizing Your Laptop (Continued)
Background and Color
You can also customize the Start Screen colors and background. At the
Start Screen, open the Action Center and click "All Settings", then select
"Personalization".
Personalize Your Lock Screen
Open the Action Center, and click "All Settings". Select Personalization >
Lock screen > Configure your options.
Personalize Your Desktop
To customize your desktop, go to your desktop and open the Action
Center. Click “Personalization”. You may now change the theme, desktop
background, colors and more.
Notifications and Actions
Notifications should appear in the top right corner of the screen. To hide
notifications, open the Action Center > All Settings > System > Notifications
and Actions.
Lock-Screen Notifications: To edit app notifications on the lock screen,
open All Settings in the Action Center. Select "Personalization", then "Lock
Screen".
Choose apps to show a quick status.
17
Network
Wi-Fi® can only be used when the device connects to a Wi-Fi® Access Point
(AP) or a free, unsecured Wi-Fi® hotspot.
NOTE: This laptop supports 2.4GHz Wi-Fi® networks only.
Turn On Wi-Fi®
Within the Action Center menu, select the "Network" icon.
Under "Network & Internet Settings", switch on Wi-Fi® to scan for available
networks.
Your laptop will list the networks it finds. Click a network to connect.
When connected, the wireless indicator appears on the status bar. The white
lines indicate connection strength.
18
Network (Continued)
Turn Off Wi-Fi®
Under "Networks", click Wi-Fi® again. Turn off Wi-Fi® when you are not using
it to extend the life of your battery between charges.
Forget a Wi-Fi® Network
Click "All Settings" in the Action Center > Network and Internet > Wi-Fi >
Manage Known Networks > then select the network you wish to delete and
click "Forget".
Connect to a Virtual Private Network (VPN).
This laptop has built-in support for VPN. You can also install third-party VPN
Software, if available in the Windows™ Store. To connect to a VPN, open the
Action Center and click "VPN". Select "Add a VPN connection" and enter a
VPN to connect.
Disconnect from a VPN
Toggle the VPN switch under the Action Center. Turn off VPN when not in
use to extend the life of your battery.
19
User Accounts
Choose whether you want to use a Microsoft™ account or a local account.
Microsoft™ Account
Use this account to sign into Windows™ and shop for apps in the
Windows™ Store. All your files are also saved to OneDrive™ by default,
allowing you to access them from any device.
Local Account
You can only use a local account on your laptop and cannot connect to the
cloud.
Manage Your Accounts
There are two ways you can manage your accounts:
1. Action Center
● Open the Action Center and click "All Settings".
● Click Accounts > Set Access for other Accounts.
2. Sign-in Options
● You can also create a PIN password to sign in to your laptop. To
access other sign-in options, go to "All Settings" in the Action Center.
Click "Accounts", then select "Sign-in Options" and follow the on-
screen instructions.
Change your Password
1. Open the Action Center > Tap "All Settings".
2. Click "Accounts" > "Sign-in Options".
3. Choose "User Accounts" from the search results.
4. Under "Password", select "Change" and follow the on-screen
instructions.
Lock or Sign Out
Your laptop will automatically lock when not in use for a while. You can
manually lock or sign out from the Start Screen by clicking the "More
Options" icon (
) on the top left.
20
Ease of Access
Ease of Access settings allow you to customize your laptop's accessibility
settings to cater to your needs.
For Ease of Access Settings:
1. Open the Action Center > click "All Settings"
2. Click "Ease of Access".
3. Configure your settings.
Laptop Settings
Activate Windows: Install the latest version of Windows™ on your laptop
with your product key.
Devices: Manage your laptop settings, including display, typing, power and
sleep. Manage Bluetooth® and other devices. Get laptop information.
Accounts: Manage and create different user accounts.
Privacy: Change your privacy settings, location settings, webcam settings,
microphone settings, etc.
Network: Manage your network connections.
Time and Language: Set date and time. Set region and language.
Ease of Access: Control accessibility settings: narrator, magnifier, high
contrast and keyboard options can be adjusted to your needs.
Update and Security: Update Windows™, save copies of your settings and
recover or reinstall your laptop. Change security settings.
21
Restart
Refresh Device
1. In the Action Center, click "All Settings"
2. Click on "Update and Security", then click "Recovery"
3. Choose how you want to refresh the device
Restart Device
1. In the Action Center, click "All Settings"
2. Click on "Update and Security", then click "Recovery"
3. Choose "Restart Now"
Specifications
Processor
Operating System
Storage
Display
Network
Headphone Output
USB Ports
HDMI®
Bluetooth®
Camera
Power
Speakers
Charging
Intel® Celeron® N3350 Processor
Windows™ 10 Home in S Mode
3GB RAM, 64GB Storage
14.1” LCD Screen (1366x768)
Wi-Fi® Enabled: 2.4GHz 802.11b/g/n
3.5mm Headphone Jack
USB Inputs x 2
Mini HDMI® Output
Compatible with Bluetooth®
0.3 MP
Rechargeable Li-Polymer Battery
DC IN 12V, 2A
2x1 W Speakers
2A
12V
NS2108
22
Need Help?
For customer support regarding your device, please submit a request by
emailing support@dpaudiovideo.zendesk.com. You will be provided a
ticket number regarding your inquiry, which you can refer to when contacting
us further.
You may also reach a Core Innovations customer service representative
by calling 1-833-909-CORE (1-833-909-2673). We are available Monday
- Friday, 9am - 5pm PST, except major holidays. Core Innovations strongly
urges customers to email their inquiry prior to calling, as this will enable us to
better assist you.
Please make sure to note the model number and a description of your
inquiry.
Thank you for purchasing a Core Innovations product.
© 2021 Core Innovations. All rights reserved. Core Innovations is a trademark
of Core Innovations LLC. Formatted capacity will be less. Windows, OneDrive
and Cortana are registered trademarks of Microsoft Corp in the United States
and other countries. Intel, the Intel logo, the Intel Inside logo, and Intel Celeron
are trademarks of Intel Corporation or its subsidiaries. © 2021 Bluetooth SIG,
Inc. All rights reserved. The Bluetooth trademarks—including the BLUETOOTH
word mark, the figure mark (the runic “B” and oval design), and the combination
mark (Bluetooth word mark and design)—are owned by the Bluetooth SIG. Wi-Fi
is a registered trademark of the Wi-Fi Alliance. The Adopted Trademarks HDMI,
HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc. in the United States
and other countries and used by Core Innovations under a permissions process
granted to the manufacturer as an adopter. USB and MicroSD are used to solely
describe the compatibility of our technology and in no way is intended to infringe
on any intellectual property rights of any respective protected marks. This device
complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause
undesired operation. MicroSD card not included. Core Innovations is not affiliated
with Microsoft®. 1 year warranty from date of purchase, 90 days only on labor.
23
Warranty Information
Limited Warranty
Core Innovations (the "Company") warrants this new product purchased and
contained in this package (the "Product") against defects in material or workmanship
for 90 Days (Parts & Labor) and 1 Year (Limited). In order for the Company to honor
this limited warranty, you must present a valid proof of purchase (i.e. a receipt)
of this Product. IMPORTANT NOTE: The customer is encouraged to carefully
inspect the Product upon receipt after purchase – especially prior to any assembly,
disassembly, mounting, installation or utilizing a third-party product of any kind,
such as a decorative or protective cover or case.
This warranty is void if the Company deems, in its discretion, that the Product
may have been damaged when the packaging was opened, through modification,
improper transport, improper storage, improper use, improper assembly or
disassembly, exposure to adverse elements, mounting or other installation, end
user negligence, water damage or tampering of the barcode of the Product. This
warranty does not apply: (a) to cosmetic damage, including but not limited to screen
damage, a cracked display, scratches, dents and broken ports; (b) to damage
caused by accident, abuse, misuse, fire, water vapor exposure, excessive exposure
to humidity, water or other liquid contact, earthquake or other external cause; (c) to
defects caused by normal wear and tear or otherwise due to the normal aging of the
product; (d) if any serial number has been removed or defaced from the product;
or (e) to damage caused by installation or mounting, assembly or disassembly, use
with a third party device, cable, protective or decorative cover/case, component or
product that does not meet the Company’s product specifications. This warranty is
a limited warranty for repair of the Product or replacement of the Product with a new
or refurbished product, subject to the conditions set forth herein.
The Company is not liable for consequential, indirect, incidental, special or punitive
damages and the Company’s total liability hereunder shall not exceed an amount
greater than the retail purchase price of the product.
90 Days Parts & Labor
The Company warrants to you as the original retail purchaser of the Product, that
should the Product have any warranted defect out of the packaging, under normal
conditions, such defect(s) will be repaired or replaced with a new or refurbished part
(at the Company’s sole discretion) without charge, if the Product is submitted to the
24
Warranty Information
Company within a period of ninety (90) calendar days from the date of purchase
of the Product. The customer is responsible for transportation cost and insurance
charges (if applicable) to the Company and must be able to document a clear proof
of delivery to the Company as well as proof of registered receipt by the Company. It
is the customer's responsibility to retain original packaging or provide like packaging
in order to facilitate the warranty repair or replacement process. The Company
will incur no liability whatsoever to provide packaging for warranty items. Should
the product be damaged en route to the Company due to insufficient or improper
packaging or improper transport, the warranty may be voided. You must receive
a return authorization number (RMA#) before sending the unit in for service. This
warranty only applies to manufacturer defects, and the Product must be returned to
the Company in its original condition.
1 Year Limited Parts
If determined to be covered under warranty, the one (1) year limited parts warranty
gives the customer the option to return the Product to the Company for repair or
replacement. The customer will be responsible for labor charges. This warranty
does not cover any incidental or indirect costs incurred as a result of a defect in the
Product, including any consequential, incidental or indirect damages.
25
CORE
INNOVATIONS
TM
Core Innovations intends to make this manual accurate and complete. However, Core Innovations makes no claim that the information contained herein covers all details and conditions. The information in this document is subject to change without notice at any time. Core Innovations assumes no responsibility for accuracy or completeness of the information contained in this manual. FCC Caution(cid:2)(cid:2)
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.