Falcon Controller Manual Product Features:
L4 L5 R4 R5 Back Paddle L4 L5 R4 R5 Mapping switch 3 Mode: Wired, 2.4G wireless, Bluetooth Support PC (Windows), Android Xinput (Wired) + Dinput (Bluetooth) + Xinput (2.4G) Include USB dongle LED indication for each Mode Powered by two AA Batteries Precise Hall Sensor Triggers Trigger lock support quick shot for FPS games Button List:
Wired Android (Bluetooth) Windows (2.4G) NO Button USB with Xinput Bluetooth Dinput Mode 2.4G Xinput Mode 1 2 3
(X) BUTTON
(Y) BUTTON
(A) BUTTON
(B) BUTTON D-PAD UP D-PAD DOWN D-PAD LEFT D-PAD RIGHT
(L3) BUTTON analog stick
(R3) BUTTON analog stick
(L1) BUTTON
(L2) BUTTON
(R1) BUTTON
(R2) BUTTON LEFT ANALOG RIGHT ANALOG 1 2 3 5 6 7 8 9 10 11 12 13 14 15 10 11 BACK KEYCODE_BACK Xbox Home KEYCODE_HOME BACK Xbox Home START KEYCODE_START (0x13B) START X Y A B D-Pad Keycode_Button_X Keycode_Button_Y Keycode_Button_A Keycode_Button_B Keycode_DPAD_UP Keycode_DPAD_DOWN Keycode_DPAD_LEFT Keycode_DPAD_RIGHT X Y A B D-Pad Left Stick Button Keycode_Button_THUMB L Left Stick Button Right Stick Button Keycode_Button_THUMB R Right Stick Button LB LT RB RT Keycode_Button_L1 AXIS_BRAKE (0.0 to 1.0)
&
Keycode_Button_L2 Keycode_Button_R1 AXIS_GAS (0.0 to 1.0)
&
Keycode_Button_R2 LB LT RB RT Left Stick Right Stick AXIS_X (-1.0 to 1.0) AXIS_Y (-1.0 to 1.0) AXIS_Z (-1.0 to 1.0) AXIS_RZ (-1.0 to 1.0) Left Stick Right Stick Mode Switch:
Left Mode: Bluetooth Mode Right Mode: 2.4G Mode USB Mode will be activated when connect the USB cable to the PC. Bluetooth Mode:
Bluetooth Pairing:
Install two AA batteries into the battery bay 1. 2. Slide the Mode switch to left side 3. Holding Home button for 5 secs until the LED quick flash in Blue, now the controller entering the Bluetooth Pairing mode 4. Go to the Bluetooth setting on the Android device, click the Bionik Falcon Controller to connect 5. The LED will stay on Blue when success connected 6. If not success, please turn off the controller then repeat step 2 to 5 Bluetooth Connect: (Success connected with the Android before) 1. Once the controller Success connected with the Android, player could simply press the Home button to connect back the Android device 2. The LED will slow flash in Blue to searching the Android device 3. LED will stay on Blue when success connected 2.4G Mode:
Insert the USB dongle to the USB port of PC Install two AA batteries into the battery bay 1. 2. 3. Slide the Mode switch to right side 4. Single press the Home button to connect to the USB dongle, the LED will slow flash in Green until success connected 5. LED will stay on GREEN when success connected 6. Go to Game Controller at the Control Panel to test the controller Button Mapping:
L3, L4, R3 and R4 button could be mapping to the designed button by 4 switchs. Mapping function ON/OFF Switch:
Slide Up to Turn OFF the mapping functions Slide Down to Turn ON the mapping functions Low Power:
At the Bluetooth and 2.4G Mode, the LED will slow flash (10s once) when the battery in low. Trigger Lock:
Slide the trigger lock to the controller top to Turn the trigger to FPS Mode with shorter travel distance Slide the trigger lock to the controller back to Turn the trigger to Normal Mode with full travel distance FCC Warnings This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Declaration of Conformance DREAM GEAR,LLC declares that the radio equipment type BNK-9014 is in complaince with Directive 2014/53/EU