User Manual THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICES MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUS E UNDERSIRED OPERATION. in a residential interference Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUT EQUIPMENT. HORITY TO OPERATE THE Keys & Controls Front Back NAVI/
FUNCTION VOLUME Put the switch power on. Please connect the remote control. Playing Disc Media 1 2Hold 3 Power Off Power On Put the Disc into Player. NAVIGATION Navigation is the function that allows you to navigate through the files in the CD. 1 Pressing NAVI/FUNCTION button shows you the list of songs and current song playing. F o l d e r A T r a c k 0 1 T r a c k 0 2 P R E V N E X T Use NAVI/FUNCTION button to find the song you'd like to listen to. Use button to exit to the upper folder. To move to the Upper folder. 2 Selecting folder and move to upper folder The next figure shows the status when you move to upper folder. To move the cursor, use the NAVI/FUNCTION button and to enter the Chosen Folder, click the NAVI/FUNCTION button. Music F o l d e r A F o l d e r B P R E V N E X T NAVI/FUNCTION button To enter the folder 3 Playing F o l d e r A T r a c k 0 1 T r a c k 0 2 MP 3 F o l d e r A T r a c k 0 1 44 KHZ KBPS 128 L R The song will be played when you press the NAVI/FUNCTION button. FUNCTION The Main Menu GENERAL beep resume fade in language load default firmware upgrade CONTROL fast scan fast skip scan speed scroll speed remote mode button auto pause adapter volume sound balance How to use Menu GENERAL
F.scan BEEP SOUND VOLUME F.skip 0 speed 3 scroll 1 4 2 TIMER sleep pwr off DISPLAY back light main lcd contrast remote lcd contrast tag information visualization time MODE repeat shuffle intro study name User EQ bass boost bass corner freq treble boost treble corner freq Main Menu Q E r e s U general display GENERAL VER 1.00 control mode t i m e r Sub Menu GENERAL beep vol
resume
fade in
language
FUNCTION(GENERAL) GENERAL BEEP VOL
: Configure beep sound (ON/OFF) with volume level. RESUME
: When activated, player resumes playing at the same spot played last after Power OFF. SOUND FADE IN
: When activated, volume steadily increases when you begin playing. It can prevent sudden loudness when you play the song after stopping. GENERAL GENERAL
F.scan F.scan F.skip F.skip 0 speed speed 3 scroll scroll BEEP VOLUME 2 1 4 GENERAL GENERAL
F.scan F.scan F.skip F.skip OFF speed speed scroll scroll RESUME ON GENERAL
F.scan F.skip OFF speed scroll SOUND FADE IN ON LANGUGE
: Song title and ID3 tag information from the CD is dependent on the PC operation system that it is made into.
(For example, when the CD is burnt from Japanese Windows, the language setting should be Japanese) GENERAL Korean
English
F.scan F.skip speed scroll LOAD DEFAULT VALUE
: Initialize to original factory setting. Button operation is as below
(Select Default Menu) (move to YES)
(Select YES : INITIALIZATION) GENERAL
F.scan LOAD DEFAULT F.skip ARE YOU SURE?
speed YES NO scroll FUNCTION(DISPLAY) DISPLAY BACK LIGHT OFF : Backlight is always off. BACK - LIGHT BUTTON ON works as below :
1 : about 3~10 seconds 2 : 10 seconds 3 : 20 seconds ADAPTER ON :
1 : about 3~10 seconds 2 : 10 seconds 3 : 20 seconds 4 : Always While playing, long pressing the play( ) button will turn on the Backlight as you have it set. BUTTON ON ADAPTER ON OFF 1 1 2 2 3 3 4 LCD CONTRAST
: Adjust LCD contrast of remote control. Using , buttons can adjust LCD contrast.
DISPLAY F.scan F.skip speed scroll 32 LCD CONTRAST VISUALIZATION
: Visualizes audio signal at play mode. You can choose between Level Meter and WaveForm. LEVEL METER WAVEFORM VISUALIZATION DISPLAY F.scan F.skip LEVEL METER speed WAVEFORM scroll
FUNCTION(TIMER and CONTROL) TAG INFORMATION TAG INFORMATION
: When ON, tag information is displayed and when
: (on) tag OFF, only the file name is displayed tag .
(off) filename . Setting the tag information to OFF while playing may show the track is playing and the NEXT track with tag tag information. tag . DISPLAY DISPLAY F.scan F.scan TAG INFORMATION TAG INFORMATION F.skip F.skip OFF OFF speed speed scroll scroll ON ON
TIME TIME
: Normal displays elapsed time.
: NORMAL Remain displays remaining time. REMAIN
. With VBR file, the time may not be accurate. VBR
. PLAY TIME INFO PLAY TIME INFO DISPLAY DISPLAY F.scan F.scan F.skip F.skip NORMAL NORMAL speed speed REMAIN REMAIN scroll scroll
TIMER (Auto Power Off time setting) SLEEP POWER OFF SLEEP POWER OFF
: The power goes off automatically after fixed time.
: . Time range can be set from 0~99 by minutes.
(OFF 1~99 1
.) and button can be used for time setting. When the power goes off, it goes back to Zero setting. OFF . TIMER TIMER DISPLAY DISPLAY F.scan F.scan F.scan F.scan SLEEP POWER OFF SLEEP POWER OFF
F.skip F.skip F.skip F.skip
0 0 speed speed speed speed
OFF OFF scroll scroll scroll scroll
STOP POWER OFF STOP POWER OFF
: The automatic power off can be made when the
: . player is in STOP mode. Time range can be made
(`1~60 .) from 1~60 minutes.
and button can be used for time setting. TIMER TIMER F.scan F.scan STOP POWER OFF STOP POWER OFF F.skip F.skip speed speed scroll scroll 1 1 MIN MIN FUNCTION(MODE) CONTROL AUTO PAUSE When Auto Pause is ON, you will need to press Play after the disc loads. Auto Pause also pauses the disc after each song and you will need to press Play to resume playing. CONTROL
F.scan F.skip OFF speed scroll AUTO PAUSE ON ADAPTER VOLUME ON: When the Adaptor is connected, the volume always remains at level 35. OFF: No use of Adaptor volume. CONTROL
F.scan ADAPTOR VOLUME F.skip 35 ON OFF speed scroll SOUND BALANCE When the lever on the Sound Balance bar is moved to L (Left, 0),the sound output will be in the left earphone. When the lever on the Sound Balance bar is moved to R (Right, 40) the sound output will be in the right earphone. The default value is 20 and the sound output will be in the center. CONTROL
F.scan F.skip speed scroll L 20 C LR BALANCE
center(20) R FUNCTION MODE REPEAT MODE / SHUFFLE MODE
: The setting value changes when you press the MODE button. MODE F.scan F.skip 1 speed DIR ALL scroll
REPEAT MODE DIR ALL MODE SHUFFLE MODE F.scan F.skip SHUFFLE 1 speed DIR ALL scroll DIR ALL
Only the selected play mode will be applied when you press the MODE button.
(For details, please refer to Page. 12 ) INTRO MODE
:INTRO MODE plays the first 10 seconds of each track. INTRO HIGHLIGHT plays the first 10 seconds from the spot 1 minute was played for each track in sequential order. For example, song A plays 10 seconds from 1 minute into the song, so the highlight ends at 1minute 10 seconds. Then song B plays 10 seconds from 1 minute into the song, so the highlight ends at 1minute 10 seconds, and so forth with each track. INTRO MODE MODE F.scan OFF F.skip ON speed HIGHLIGHT ON scroll
STUDY MODE (LANGUAGE STUDY) :
5 SEC / 10 SEC: When you press STOP, it goes back 5 or 10 seconds. It will work as INTERVAL REPEAT when you press the MODE button on the remote. BEEP: When BEEP is ON, it lets you know the button operation with beep sound.
MODE F.scan F.skip OFF speed 10 SEC scroll STUDY 5 SEC BEEP Model No. : iDP-100 PORTABLE DATAPLAY MEDIA PLAYER EXTERNAL DC POWER SUPPLY : 5V BATTERY SUPPLY :
Li-Ion RECHARGEABLE BATTERY SERIAL NO. Manufactured by iRiver Assembled in China 8F Posgen VentureTower, 1586-7 Seocho-dong, Seocho-gu, Seoul, Korea Zip ; 137-070 Tel : +82 080 3486 3838 / Fax : +82 2 3019 1888