We thought about every little detial so you could only focus on your driving. Drive Safe. The dride team What's in the box Single or Dual lens Camera bracket & tape USB cable Fusebox adapter Trim tool Cable clips Installation 1 I S M Insert memory card up to 1 TB. Insert nano SIM card.
*In selected models only 2 Apply the tape on the camera bracket. Attach the camera to the camera bracket and gently push it away to lock it in place. 3 Place the Dride 4k behind the car mirror. 4 Connect the power cable to the power socket on your Dride 4k. 5 Battery Ground Ignition Plug the fusebox adapter and connect it to the fuse box in your car. It might be a good idea to consult with a professional. Use the trim tool to carefully remove any trim and tidy any remaining wiring with the cable clips. 5 Use the trim tool to carefully remove any trim and tidy any remaining wiring with the cable clips. 6 White LED Recording Yellow LED Powering on/off Red LED An error occurred, open the app for more info 7 To get started, Download the app and follow the instructions Scan QR code or Search for on App store or Google play Support Visit the Dride Help Center as your resource for tips, troubleshooting and guides on how to get the most out of Dride. io/help Specification View angle: 140 degree Video Mode: Loop record / Motion Detection Video Format: MP4 Video Encoding: H.264 Or H.265 Video Resolution: Up to 4K 3840X2160@30fps + 1080p@30fps Chipset: Dual Core ARM cortex A7@1.2GHz Camera: Front: IMX415 Internal: SC2322 Front cam Night vision: Sony Starvis In cabin Night vision: Active IR cut GPS: Included Wi-Fi: 2.4Ghz & 5Ghz 802.11a/b/g/n/ac Bluetooth: BLE 4.1 Impact detection (G-Sensor): Included Parking mode: Triggered by Doppler Radar Microphone: Included Speaker: Included Storage: SD Card eMMC Cloud storage: Free unlimited cloud storage for road videos SD Card: Up to 1TB eMMC: 128GB (Optional) Charging interface: USB C Power loss prevention:
Supercapacitors Power consumption:
Parking mode 50 MAH Wi-Fi version 400 MAH - 500 MAH LTE version 900 MAH - 1000 MAH Power supply: 5V/2A Storage temperature: -30oc 100oc Operating temperature: -20oc 80oc Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated for operating in conjunction with any other antenna or transmitter. FCC Warning Statement Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid ereasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
19 Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid ereasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated for operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.