Control your lights from anywhere in the world. Light must be installed and paired before starting. 100-240V compatible Manual reset Bluetooth and Wi-Fi indicators What does the Bridge do?
The Bridge creates a secure private connection to your local network and the cloud service using your Wi-Fi router. With the Bridge you will be able to control and manage your local devices from anywhere using your mobile device or web browser and the voice control assistant Alexa. Add Hub Connect all of your smart devices in just one place. Tap the arrow to begin the setup process. 2 Setup a. Make sure the Bridge is within 40 feet but not closer than 5 feet of the wi router you want to connect it to and 70 feet of the nearest compatible device. b. Plug the Internet Access Bridge into a 100-240V socket. c. Wait 2 minutes for the bridge to initialize. Note: Sometimes it may help to move a device closer to the Bridge and the Bridge closer to the wi router for setup. 50 feet 30 - 70 feet What do the lights mean?
Double ashing Green Double ashing Blue Solid Green Solid Blue is not con gured or if it has been setup, Wi the router or internet are down. The Bridge is not con gured to an account. is connected to a router and the internet. The wi The Bridge is connected to an network. 2 Add to the app:
Launch the app, go to the Add device screen and tap the + icon to scan available devices. Important:You will need to have at least one compatible device already set up and powered on before you try to connect the Bridge. 3 3 Select your Bridge from the list of scanned devices and press Done 4 Choose your preferred Wi-Fi network from the list populated on the app, then enter the Wi-Fi network password to complete the setup. Note: Your wifi network password and your pass word may be different. Having trouble?
There are two ways to refresh your Bridge. You can either reboot it or factory reset it. Reboot:
Press the button on the Bridge for one second to reboot the Bridge. This will refresh the Bridges connection w ith the internet. Factory Reset:
Having trouble and want to start over? Press the reset button for 15 seconds to reset your Bridge back to factory settings. 4 72-DBK1W1-MANB3 FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. Industry Canada This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage, et 5
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. Le dispositif rencontre lexemption des limites courantes dvaluation dans la section 2.5 de RSS 102 et la conformit lexposition de RSS-102 rf, utilisateurs peut obtenir linformation canadienne sur lexposition et la conformit de rf. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps quaucune autre antenne ou metteur. Cet quipement devrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps. 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water 6.Clean only with dry cloth. 7.Do not block any ventilation openings. Install in accordance with the manufactures instructions. 8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10.Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. 11.Only use attachments/accessories specified by the manufacturer. 12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13.Unplug the apparatus during lightning storms or when unused for long periods of time. 14.Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15.WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. The direct plug-in a adapter is used as disconnect divice, the disconnect divice shall remain readily operable. 6