1 70mm + |
Ht] e Code scanning Welcome to A50 How to take care of your reader Electrical characteristics:
Power supply:5V=2A Output:5.0 V=2000 mA Input:100-240V 50/60Hz0.3A e Use only the battery charger included with the reader. Do not connect it to a power source of more than 5 volts. e Avoid contact with microwaves or extreme heat sources such as hair A] Charger input dryers and stoves. -
e Do not submerge it in water or place it near sinks, bathrooms or any other damp place. e Avoid exposing the battery in contact with metallic objects or in places that can generate short circuits or fires. e Do not use sharp tools to touch or attempt to separate internal components or connectors. e Do not drop, disarm, tear out, open, crush, bend, warp, drill, shred, paint, incinerate, or insert foreign objects into the reader. e Do not open it or try to fix it on your own We can help you in case of malfunction. We recommend you read this guide to use your Six. uno e The reader contains small detachable parts and therefore reader correctly and to make the most of it. should be kept away from children. If any of the small objects Buy are accidentally swallowed, see a doctor immediately. e Keep it in environments with temperatures between 0C and40C. e Clean it using a dry cloth. Do not use water or other cleaningproducts. Smart POS Qasc Boer 120mm Operation of this equipment is subject to the following two conditions:
(1) The equipment or device may not cause harmful interference.
(2] This equipment or device must accept any interference received, including interference that may cause undesired
. FCC Regulatory Compliance operation. Headquarter Office This device complies with Part 15 of the FCC Rules. Operation is subjebt to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received) including interference that may cause undesired operation. RF Exposure Compliance
. changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the This equipment complies with FCC radiation exposure limits set Rm.407, B1 2C, #10 (Universal Business Park), equipment. forth for an uncontrolled environment. End user must follow the Jiuxiangiao Road, Chaoyang District, Beijing, China This equipment has been tested and found to comply with the limits forja Class B digital device, pursuant to Part 15 of the FCC Rules. These specific operating instructions for satisfying RF exposure limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses compliance. This transmitter must not be co-located or operating and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to in conjunction with any other antenna or transmitter. Website:www.dspread.com radio communications. However, there is no guarantee that interference will not occur in a particular installation. The portable device is designed to meet the requirements for If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, exposure to radio waves established by the Federal Tel/Fax:+86-10-84493638 the user is encouraged to try to correct the interference by one or more'of the following measures: Communications Commission (USA). These requirements set a
-- Reorient or relocate the receiving antenna. SAR limit of 4.0 W/kg averaged over ten grams of tissue. Email:Sales@mail.dspread.com -- Increase the separation between the equipment and receiver. The highest SAR value reported under this standard during
-- Connect the equipment into an outlet on a circuit different from that tg which the receiver is connected. product certification for use when properly worn on the extremity
-- Consult the dealer or an experienced radio/TV technician for help. with a minimum distance Omm. Device layout Welcome to A50 Installation Guidance Package contents . Install the battery NOTE: 1. Confirm the machine is turned off when you install or uninstall the SIM/UIM card, or
* Open the battery cover of the device. your card will be damaged. Be sure all items listed here were included with your device. * Connect the cable of the battery to the right side battery connector on the machine and 2. Do not paste any label on the SIM/SAM card to influence your card thickness, or it put the battery to its place. (Tag label on the battery upwards) may result in loading or removing the card can not be carried out smoothly.
* Close the battery cover. Open the battery Install the 3. Power on/off the device cover figure 4 battery figure |
Power on: press and hold the power key until the LCD display, then the machine will be turned on. Power off: press and hold the power key more than 2 seconds, then the screen will give you a tips, you just choose the shutdown key. F Contactless card Force shut down: Press the power key more than 8 seconds. Magnetic stripe reader above card reader 4. Install the printer paper
* Pull up the handle and open the paper holder Lid.
* Put the printer paper into paper holder Lid according to the direction of the graphic.
* Close the paper cover. Open the Paper holder Lid NOTE: When removing the battery, please pick up the battery, then gently forced to unplug it to avoid damage to cables. CASH RECEIPT Total 78.64 . Install SIM/SAM card
* Open the battery cover and remove the battery.
* Keep the chip side on the SIM/SAM card downward and unfilled corner outward, insert the card to the bottom.
* Install the battery and then close the battery cover. Install SIM/SAM/card SIM NOTE: 1. When install thermal paper, we need the side coated with thermal media facing the printer heating plate, or you can not print out the characters correctly. 2. Do not keep the printer paperless for long time, or it may cause the roller pasting with the plate. 3. The temperature is high on the heating plate, please do not touch it without cooling. 4. Tear-off knife edge is sharp, please be careful. Do not touch it for avoiding danger. Power Adapter POS Terminal Strap hole Chip card reader Man: 120x70mm | beantaa: 1289 heat | Ml: 3mm | beandri: MASiF | HE: AHERN