app
s
|
Applicant Information
|
|
various
|
Effective |
2023-07-31
|
various
|
2023-05-24
|
various
|
2022-07-01
|
various
|
2021-09-29
|
various
|
2021-09-28
|
various
|
2021-08-18
|
various
|
2021-08-17
|
various
|
2021-08-16
|
various
|
2021-06-18
|
various
|
2021-04-11
|
various
|
2021-01-13
|
various
|
2021-01-12
|
various
|
2020-12-13
|
various
|
2020-11-04
|
various
|
2020-08-17
|
various
|
2020-08-14
|
various
|
2020-07-31
|
various
|
2020-05-25
|
various
|
Applicant's complete, legal business name |
DT Research, Inc.
|
various
|
FCC Registration Number (FRN) |
0019830793
|
various
|
Physical Address |
3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
|
various
|
NEW TAIPEI, N/A
|
various
|
Taiwan
|
|
app
s
|
TCB Information
|
various
|
TCB Application Email Address |
U******@SGS.COM
|
various
|
u******@sgs.com
|
various
|
u******@sgs.com
|
various
|
h******@acbcert.com
|
various
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
various
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
app
s
|
FCC ID
|
various
|
Grantee Code |
YE3
|
various
|
Equipment Product Code |
600-AX200NG
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
various
|
Name |
J******** H********
|
various
|
Telephone Number |
886-2******** Extension:
|
various
|
Fax Number |
886-2********
|
various
|
E-mail |
j******@dtri.com
|
|
app
s
|
Technical Contact
|
various
|
Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
various
|
SGS-CSTC Standards Technical Services
|
various
|
SGS-CSTC Standards Technical Services Co., Ltd
|
various
|
SGS-CSTC Standards Technical Services Co
|
various
|
DEKRA Testing and Certification Co., Ltd.
|
various
|
Name |
K******** X****
|
various
|
K******** J********
|
various
|
A******** L******
|
various
|
Physical Address |
No.1 Workshop, M-10, Middle Section Science & Tech
|
various
|
No.1 Workshop, M-10, Middle Section
|
various
|
No.198 Kezhu Road
|
various
|
No.198 Kezhu Road, Science City Economic
|
various
|
Shenzhen, 518057
|
various
|
518057
|
various
|
Guangzhou, Guangdong, 510663
|
various
|
China
|
various
|
Taiwan
|
various
|
Telephone Number |
+8675********
|
various
|
86-20********
|
various
|
86-75********
|
various
|
51805********
|
various
|
Fax Number |
N/A********
|
various
|
86-75********
|
various
|
E-mail |
K******@sgs.com
|
various
|
k******@sgs.com
|
various
|
K******@sgs.com
|
various
|
a******@dekra.com
|
|
app
s
|
Non Technical Contact
|
various
|
Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd.
|
various
|
SGS-CSTC Standards Technical Services
|
various
|
SGS-CSTC Standards Technical Services Co., Ltd
|
various
|
Name |
K****** X******
|
various
|
Physical Address |
No.1 Workshop, M-10, Middle Section Science & Tech
|
various
|
No.1 Workshop, M-10, Middle Section
|
various
|
Shenzhen, 518057
|
various
|
518057
|
various
|
China
|
various
|
Telephone Number |
+8675********
|
various
|
86-75********
|
various
|
51805********
|
various
|
Fax Number |
N/A********
|
various
|
86-75********
|
various
|
E-mail |
K******@sgs.com
|
various
|
k******@sgs.com
|
|
app
s
|
Confidentiality (long or short term)
|
various |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
various | No |
various | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/27/2024 |
various | 11/21/2023 |
various | 12/28/2022 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
various |
Is this application for software defined/cognitive radio authorization? | No |
various | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
various | DSS - Part 15 Spread Spectrum Transmitter |
various | DTS - Digital Transmission System |
various | JBP - Part 15 Class B Computing Device Peripheral |
various | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | RUGGED TABLET |
various | Mobile Tablet |
various | Industrial Micro PC, Medical Micro PC |
various | Battery-Powered all-in-one computer |
various | WLAN Module |
various | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
various | Modular Equipment Type | Does not apply |
various | Single Modular Approval |
various | Limited Single Modular Approval |
various | Purpose / Application is for | Class II Permissive Change |
various | Class II permissive change or modification of presently authorized equipment |
various | Change in Identification |
various | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
various | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
various | Grant Comments | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(DT382GL, DT382xxxxx, x=0-9, A~Z, - or null, or . or /), changed the antenna, contained granted module FCC ID: YE3FSC-BT909C and FCC ID: XMR201906EM06A and performed Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 0.54W/kg and 0.89W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and
simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively.
SAR testing was performed to demonstrate RF compliance.
Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(DT382GL, DT382xxxxx, x=0-9, A~Z, - or null, or . or /), changed the antenna, contained granted module FCC ID: YE3FSC-BT909C and FCC ID: XMR201906EM06A and performed Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 0.12W/kg and 0.89W/kg respectively. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(DT382GL, DT382xxxxx, x=0-9, A~Z, - or null, or . or /), changed the antenna, contained granted module FCC ID: YE3FSC-BT909C and FCC ID: XMR201906EM06A and performed Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 0.19W/kg and 0.89W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter
product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and
1.49W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to install the single module into a host (Mobile Tablet, 373T/MD, 373xxxxx(x=0-9, A-Z, - or null, or ., or /)), change the antenna, block band 6GHz(5925-7125MHz) by software changed and perform Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.47W/kg and 1.49W/kg respectively. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to install the single module into a host (Mobile Tablet, 373T/MD, 373xxxxx(x=0-9, A-Z, - or null, or ., or /)), change the antenna and perform Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.94W/kg and 1.49W/kg respectively. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to install the single module into a host (Mobile Tablet, 373T/MD, 373xxxxx(x=0-9, A-Z, - or null, or ., or /)), change the antenna and perform Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.24W/kg and 1.49W/kg respectively. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and
1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
Permissive changed to install the module into host Mobile Tablet and change the antenna as specified under 47 CFR 2.1043 of the FCC rules.
The highest reported Body and Simultaneous SAR values are 0.20W/kg and 1.59W/kg respectively. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
Permissive changed to install the module into host Mobile Tablet and change the antenna as specified under 47 CFR 2.1043 of the FCC rules.
The highest reported Body and Simultaneous SAR values are 0.20W/kg and 1.59W/kg respectively. SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation
instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing.
OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
Permissive changed to install the module into host Mobile Tablet and change the antenna as specified under 47 CFR 2.1043 of the FCC rules.
The highest reported Body and Simultaneous SAR values are 0.20W/kg and 1.59W/kg respectively. SAR testing was performed to demonstrate RF compliance. |
various | Output power listed is conducted. Modular Approval. Device is an 802.11b/g/n/ax device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for 2.4 GHz band operationsas described in this filing. The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance.
This device supports 20, and 40 MHz bandwidth modes.
Class II Permissive Change: (1) The change is to request approval for mobile category specific host of DT Research, Inc Industrial Micro PC/Medical Micro PC, model number: 139CSXXX, X is -, any alphanumeric or blank. |
various | Output power listed is conducted. Modular Approval. Device is an 802.11a/n/ac/ax device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for 5 GHz band operationsas described in this filing. The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance.
This device supports 20, 40, 80 and 160 MHz bandwidth modes.
Class II Permissive Change: (1) The change is to request approval for mobile category specific host of DT Research, Inc Industrial Micro PC/Medical Micro PC, model number: 139CSXXX, X is -, any alphanumeric or blank. |
various | Output power listed is conducted. Modular Approval.
The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance.
Class II Permissive Change: (1) The change is to request approval for mobile category specific host of DT Research, Inc Industrial Micro PC/Medical Micro PC, model number: 139CSXXX, X is -, any alphanumeric or blank. |
various | Output power listed is conducted. Modular Approval. Device is an 802.11a/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for 5 GHz band operationsas described in this filing. The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance.
This device supports 20, 40, 80 and 160 MHz bandwidth modes.
Class II Permissive Change: (1) The change is to request approval for portable category specific host of DT Research, Inc Tablet PC, model number: 584T. |
various | Output power listed is conducted. Modular Approval. Device is an 802.11a/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for 5 GHz band operationsas described in this filing. The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance.
This device supports 20, 40, 80 and 160 MHz bandwidth modes.
Class II Permissive Change: (1) The change is to request approval for portable category specific host of DT Research, Inc Tablet PC, model number: 582T. |
various | Output power listed is conducted. Modular Approval. Device is an 802.11b/g/n device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for 2.4 GHz band operationsas described in this filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest measured body SAR values is: 0.31 W/kg.
This device supports 20, and 40 MHz bandwidth modes.
Class II Permissive Change: (1) The change is to request approval for portable category specific host of DT Research, Inc Tablet PC, model number: 584T. |
various | Output power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
The highest measured body SAR values is: 0.06 W/kg.
Class II Permissive Change: (1) The change is to request approval for portable category specific host of DT Research, Inc Tablet PC, model number: 584T. |
various | Modular Approval.
Class II Permissive Change: (1) The change is to request approval for portable category specific host of DT Research, Inc Tablet PC, model number: 584T. |
various | Output power listed is conducted. Modular Approval. Device is an 802.11b/g/n device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for 2.4 GHz band operationsas described in this filing. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF
exposure compliance. The highest measured body SAR values is: 0.31 W/kg.
This device supports 20, and 40 MHz bandwidth modes.
Class II Permissive Change: (1) The change is to request approval for portable category specific host of DT Research, Inc Tablet PC, model number: 582T. |
various | Output power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be used except in accordance with FCC multi-transmitter product procedures.
Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.
The highest measured body SAR values is: 0.06 W/kg.
Class II Permissive Change: (1) The change is to request approval for portable category specific host of DT Research, Inc Tablet PC, model number: 582T. |
various | Modular Approval.
Class II Permissive Change: (1) The change is to request approval for portable category specific host of DT Research, Inc Tablet PC, model number: 582T. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Permissive changed as specified under 47 CFR 2.1043 of the FCC rules. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Permissive changed as specified under 47 CFR 2.1043 of the FCC rules. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Permissive changed as specified under 47 CFR 2.1043 of the FCC rules. |
various | Permissive changed as specified under 47 CFR 2.1043 of the FCC rules. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively.
This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: LT350) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 1.11 W/kg and 1.91W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively.
This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: DT380CR) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 1.20W/kg and 2.38 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively.
This Class II Permissive Change provides a SAR test report in order to establish portable operation in a specified host product (Mobile Tablet, Model: LT350) documented in this filing. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly. The highest reported Body-worn and simultaneous SAR values are 0.50W/kg and 1.69 W/kg, respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive Change: This change is for module being used in different host (Fixed category configuration), Host Brand/Model: DT/ 504T and to add two new antennas as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
This device has 20/40 MHz bandwidth modes.
Class II Permissive Change: This change is for module being used in different host (Fixed category configuration), Host Brand/Model: DT/ 504T and to add two new antennas as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
various | Class II Permissive Change: This change is for module being used in different host (Fixed category configuration), Host Brand/Model: DT/ 504T and to add two new antennas as described in this filing. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive Change: This change is for module being used in different host (Fixed category configuration), Host Brand/Model: DT/ 504T and to add two new antennas as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive Change: This change is for module being used in different host (Portable category configuration), Host Brand/Model: DT/ LT320 and to add a new antenna as described in this filing. SAR Testing has been performed to demonstrate RF Compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 1.33W/kg respectively. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
This device has 20/40 MHz bandwidth modes.
Class II Permissive Change: This change is for module being used in different host (Portable category configuration), Host Brand/Model: DT/ LT320 and to add a new antenna as described in this filing. SAR Testing has been performed to demonstrate RF Compliance. The highest reported Body and Simultaneous SAR values are 0.71W/kg and 1.11W/kg respectively. |
various | Class II Permissive Change: Adds portable operation when the module is integrated into an DT Tablet, Model: LT320, as described in this filing. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive Change: This change is for module being used in different host (Portable category configuration), Host Brand/Model: DT/ LT320 and to add a new antenna as described in this filing. SAR Testing has been performed to demonstrate RF Compliance. The highest reported Body and Simultaneous SAR values are 1.31W/kg and 1.35W/kg respectively. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
This device has 20/40 MHz bandwidth modes.
Class II Permissive Change: This change is for module being used in different host (Portable category configuration), Host Brand/Model: DT/ LT330 and to add a new antenna as described in this filing. SAR Testing has been performed to demonstrate RF Compliance. The highest reported Body and Simultaneous SAR values are 0.47W/kg and 0.87W/kg respectively. |
various | Class II Permissive Change: Adds portable operation when the module is integrated into an DT Tablet, Model: LT330, as described in this filing. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive Change: This change is for module being used in different host (Portable category configuration), Host Brand/Model: DT/ LT330 and to add a new antenna as described in this filing. SAR Testing has been performed to demonstrate RF Compliance. The highest reported Body and Simultaneous SAR values are 0.05W/kg and 1.59W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive Change: This change is for module being used in different host (Portable category configuration), Host Brand/Model: DT/ LT330 and to add a new antenna as described in this filing. SAR Testing has been performed to demonstrate RF Compliance. The highest reported Body and Simultaneous SAR values are 1.19W/kg and 1.59W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive Change: Single Modular Approval, address RF Exposure along with the WWAN module (FCC ID: N7NEM75S) co-location in the host, Host Brand/model: DT/ DT313Y, as documented in this filing. SAR Testing has been performed to demonstrate RF Compliance. The highest reported Body and Simultaneous SAR values are 1.20W/kg and 1.55W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive Change: Single Modular Approval, address RF Exposure along with the WWAN module (FCC ID: N7NEM75S) co-location in the host, Host Brand/model: DT/ DT313Y, as documented in this filing. SAR Testing has been performed to demonstrate RF Compliance. The highest reported Body and Simultaneous SAR values are 0.23W/kg and 1.30W/kg respectively. |
various | Class II Permissive Change: Adds portable operation when the module is integrated into an DT Tablet, Model DT313Y, as described in this filing. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
This device has 20/40 MHz bandwidth modes.
Class II Permissive Change: Single Modular Approval, address RF Exposure along with the WWAN module (FCC ID: N7NEM75S) co-location in the host, Host Brand/model: DT/ DT313Y, as documented in this filing. SAR Testing has been performed to demonstrate RF Compliance. The highest reported Body and Simultaneous SAR values are 1.12W/kg and 1.52W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive Change: Single Modular Approval, address RF Exposure along with the WWAN module (FCC ID: N7NEM75S) co-location in the host, Host Brand/model: DT/ DT301Y, as documented in this filing. SAR Testing has been performed to demonstrate RF Compliance. The highest reported Body and Simultaneous SAR values are <0.1W/kg and 1.25W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive Change: Single Modular Approval, address RF Exposure along with the WWAN module (FCC ID: N7NEM75S) co-location in the host, Host Brand/model: DT/ DT301Y, as documented in this filing. SAR Testing has been performed to demonstrate RF Compliance. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.24W/kg respectively. |
various | Class II Permissive Change: Adds portable operation when the module is integrated into an DT Tablet, Model DT301Y, as described in this filing. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
This device has 20/40 MHz bandwidth modes.
Class II Permissive Change: Single Modular Approval, address RF Exposure along with the WWAN module (FCC ID: N7NEM75S) co-location in the host, Host Brand/model: DT/ DT301Y, as documented in this filing. SAR Testing has been performed to demonstrate RF Compliance. The highest reported Body and Simultaneous SAR values are 1.18W/kg and 1.26W/kg respectively. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multitransmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross
reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive Change: Single Modular Approval, address RF Exposure along with the WWAN module (FCC ID: N7NEM7455) co-location in the host, Host Brand/model: DT/ DT311Y, as documented in this filing. SAR Testing has been performed to demonstrate RF Compliance. The highest reported Body and Simultaneous SAR values are 1.17W/kg and 1.53W/kg respectively. |
various | Class II Permissive Change: Adds portable operation when the module is integrated into an DT Tablet, Model DT311Y, as described in this filing. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance.
Class II Permissive Change: Single Modular Approval, address RF Exposure along with the WWAN module (FCC ID: N7NEM7455) co-location in the host, Host Brand/model: DT/ DT311Y, as documented in this filing. SAR Testing has been performed to demonstrate RF Compliance. The highest reported Body and Simultaneous SAR values are 0.06W/kg and 1.45W/kg respectively. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
This device has 20/40 MHz bandwidth modes.
Class II Permissive Change: Single Modular Approval, address RF Exposure along with the WWAN module (FCC ID: N7NEM7455) co-location in the host, Host Brand/model: DT/ DT311Y, as documented in this filing. SAR Testing has been performed to demonstrate RF Compliance. The highest reported Body and Simultaneous SAR values are 0.89W/kg and 1.43W/kg respectively. |
various | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.33W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.75W/kg and 1.44W/kg respectively.
This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 18mm minimum test separation distance.
SAR testing was performed to demonstrate RF compliance. |
various | Is there an equipment authorization waiver associated with this application? | No |
various | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
various
|
Firm Name |
SGS-CSTC Standards Technical Services Co., Ltd. Sh
|
various
|
SGS-CSTC Standards Technical Services Co., Ltd.
|
various
|
SGS-CSTC Standards Technical Services Co., Ltd
|
various
|
Intel Corporation S.A.S.
|
various
|
Name |
K****** X****
|
various
|
K****** J********
|
various
|
D**** Y****
|
various
|
N**** A******
|
various
|
Telephone Number |
+86 (********
|
various
|
86-0-********
|
various
|
+86 0********
|
various
|
00334********
|
various
|
Fax Number |
00334********
|
various
|
E-mail |
K******@sgs.com
|
various
|
k******@sgs.com
|
various
|
D******@sgs.com
|
various
|
n******@intel.com
|
|