FCC ID: YE3600-AX210NG Rugged Convertible Laptop

by: DT Research, Inc. latest update: 2024-04-01 model: 600-AX210NG

Sixty Three grants have been issued under this FCC ID from 05/06/2022 to 04/01/2024 (this is one of twenty releases in 2024 for this grantee). Public details available include frequency information, manuals, and internal & external photos. some products also feature user submitted or linked troubleshooting guides, warrantee terms, drivers, instructions, & password defaults.
permalink for this FCC identifier
product lifecycle: recent release
|
|
|   
eg for Slack usage
app s submitted / available
various AX210NGW- User Manual Users Manual pdf 2.29 MiB May 03 2022 / May 06 2022
various user manual Users Manual pdf 426.09 KiB October 26 2023 / April 23 2024 delayed release
various Internal Photo Internal Photos pdf 2.49 MiB October 26 2023 / April 23 2024 delayed release
various Internal Photos Internal Photos pdf 1.44 MiB November 29 2022 / May 29 2023 delayed release
various Label Internal Photos pdf 461.44 KiB February 04 2024
various AX210NGW- Expho External Photos pdf 78.52 KiB May 03 2022 / May 06 2022
various External Photo External Photos pdf 875.49 KiB October 26 2023 / April 23 2024 delayed release
various External Photos External Photos pdf 617.47 KiB November 29 2022 / May 29 2023 delayed release
various Label Location External Photos pdf 2.45 MiB October 26 2023 / April 23 2024 delayed release
various AX210NGW- Label ID Label/Location Info pdf 194.56 KiB May 03 2022 / May 06 2022
various AX210NGW- Label Location ID Label/Location Info pdf 106.50 KiB May 03 2022 / May 06 2022
various Label ID Label/Location Info pdf 689.72 KiB April 01 2024
various ID Label/Location Info pdf January 17 2023 / January 18 2023
various Antenna Specification Test Report pdf 2.33 MiB April 01 2024
various Block Diagram Block Diagram pdf April 01 2024 confidential
various Declaration Letter Attestation Statements pdf 468.92 KiB April 01 2024
various FCC Authority letter Cover Letter(s) pdf 300.02 KiB April 01 2024
various FCC Confidentiality Letter Cover Letter(s) pdf 157.52 KiB April 01 2024
various Label Location Users Manual pdf April 01 2024 / September 28 2024 delayed release
various Operational Description Operational Description pdf April 01 2024 confidential
various PCII change request letter Cover Letter(s) pdf 34.83 KiB April 01 2024
various RF Exposure Info RF Exposure Info pdf 522.04 KiB April 01 2024
various SCH Schematics pdf April 01 2024 confidential
various Test Report Test Report pdf 1.16 MiB April 01 2024
various Test Report Test Setup Photos pdf 1.47 MiB April 01 2024
various US Agent for Service of Process Attestation Statements pdf 340.48 KiB April 01 2024
various setup photo Test Setup Photos pdf 332.60 KiB October 26 2023 / April 23 2024 delayed release
various Operation Description Operational Description pdf April 01 2024 confidential
various Schematics Schematics pdf April 01 2024 confidential
various Software Security Description SDR Software/Security Inf pdf April 01 2024 confidential
various Test Setup Photos Test Setup Photos pdf 296.28 KiB November 29 2022 / May 29 2023 delayed release
various Test Report pdf March 05 2024
various Authorization Letter Cover Letter(s) pdf 340.74 KiB February 04 2024
various Confidentiality Letter Cover Letter(s) pdf 198.04 KiB February 04 2024
various RF Exposure Report RF Exposure Info pdf 468.04 KiB February 04 2024
various US Agent Attestation Statements pdf 382.23 KiB February 04 2024
various Lable Location External Photos pdf January 15 2024 / July 14 2024 delayed release
various Tune Up Parts List/Tune Up Info pdf January 15 2024 confidential
various Schematics Diagram Schematics pdf January 15 2024 confidential
various SAR Report Test Report pdf 1.55 MiB January 15 2024
various SAR Test Report Test Report pdf 2.70 MiB January 08 2024
various MPE RF Exposure Info pdf 1.62 MiB November 30 2023
various SDR Software Info SDR Software/Security Inf pdf November 30 2023 confidential
various Tune Up Procedure Parts List/Tune Up Info pdf November 30 2023 confidential
various Attestation Statements pdf October 26 2023
various Test Report RF Exposure Info pdf 1.74 MiB October 26 2023
various Test Report pdf October 09 2023
various Cover Letter(s) pdf February 24 2023
various Letter Cover Letter(s) pdf 23.82 KiB February 24 2023
various Test Report pdf February 24 2023
various Block Block Diagram pdf January 17 2023 confidential
various Calibration Certificate RF Exposure Info pdf 2.35 MiB January 18 2023
various Operation Operational Description pdf January 17 2023 confidential
various RF Exposure Info pdf January 17 2023 / January 18 2023
various SAR Setup Photo Test Setup Photos pdf 934.26 KiB January 17 2023 / July 17 2023 delayed release
various Block Diagram pdf January 17 2023
various RF Exposure Info pdf November 29 2022
various SOFTWARE SECURITY DECLARATION SDR Software/Security Inf pdf November 29 2022 confidential
various FCC Declaration Letter Cover Letter(s) pdf 149.13 KiB November 25 2022
various cover letter Attestation Statements pdf 44.45 KiB November 25 2022
various test photo Test Setup Photos pdf 356.08 KiB November 25 2022 / May 24 2023 delayed release
various Software Security Description Cover Letter(s) pdf 118.44 KiB November 25 2022
various Channel Statement Cover Letter(s) pdf 72.15 KiB November 25 2022
various RF Exposure Info pdf November 25 2022
various AX210NGW- Confidentiality Request 20220420 rev Cover Letter(s) pdf 200.60 KiB May 03 2022 / May 06 2022
various AX210NGW- Declaration letter for electrically identical rev Cover Letter(s) pdf 170.75 KiB May 03 2022 / May 06 2022
various AX210NGW- Declaration of authorization FCC Cover Letter(s) pdf 138.27 KiB May 03 2022 / May 06 2022
various Confidential Software Security Description FCC SDR Software/Security Inf pdf May 03 2022 confidential
various FCC Auth Ltr Change of ID DT Research rev01 Cover Letter(s) pdf 87.87 KiB May 03 2022 / May 06 2022
various AX210NGW- User Manual Users Manual pdf 2.29 MiB May 03 2022 / May 06 2022
various user manual Users Manual pdf 426.09 KiB October 26 2023 / April 23 2024 delayed release
various Internal Photo Internal Photos pdf 2.49 MiB October 26 2023 / April 23 2024 delayed release
various Internal Photos Internal Photos pdf 1.44 MiB November 29 2022 / May 29 2023 delayed release
various Label Internal Photos pdf 461.44 KiB February 04 2024
various AX210NGW- Expho External Photos pdf 78.52 KiB May 03 2022 / May 06 2022
various External Photo External Photos pdf 875.49 KiB October 26 2023 / April 23 2024 delayed release
various External Photos External Photos pdf 617.47 KiB November 29 2022 / May 29 2023 delayed release
various Label Location External Photos pdf 2.45 MiB October 26 2023 / April 23 2024 delayed release
various AX210NGW- Label ID Label/Location Info pdf 194.56 KiB May 03 2022 / May 06 2022
various AX210NGW- Label Location ID Label/Location Info pdf 106.50 KiB May 03 2022 / May 06 2022
various Label ID Label/Location Info pdf 689.72 KiB April 01 2024
various ID Label/Location Info pdf January 17 2023 / January 18 2023
various Antenna Specification Test Report pdf 2.33 MiB April 01 2024
various Declaration Letter Attestation Statements pdf 468.92 KiB April 01 2024
various FCC Authority letter Cover Letter(s) pdf 300.02 KiB April 01 2024
various FCC Confidentiality Letter Cover Letter(s) pdf 157.52 KiB April 01 2024
various PCII change request letter Cover Letter(s) pdf 34.83 KiB April 01 2024
various RF Exposure Info RF Exposure Info pdf 522.04 KiB April 01 2024
various Test Report Test Report pdf 1.16 MiB April 01 2024
various Test Report Test Setup Photos pdf 1.47 MiB April 01 2024
various US Agent for Service of Process Attestation Statements pdf 340.48 KiB April 01 2024
various setup photo Test Setup Photos pdf 332.60 KiB October 26 2023 / April 23 2024 delayed release
various Test Setup Photos Test Setup Photos pdf 296.28 KiB November 29 2022 / May 29 2023 delayed release
various Authorization Letter Cover Letter(s) pdf 340.74 KiB February 04 2024
various Confidentiality Letter Cover Letter(s) pdf 198.04 KiB February 04 2024
various RF Exposure Report RF Exposure Info pdf 468.04 KiB February 04 2024
various US Agent Attestation Statements pdf 382.23 KiB February 04 2024
various SAR Report Test Report pdf 1.55 MiB January 15 2024
various SAR Test Report Test Report pdf 2.70 MiB January 08 2024
various MPE RF Exposure Info pdf 1.62 MiB November 30 2023
various Attestation Statements pdf October 26 2023
various Test Report RF Exposure Info pdf 1.74 MiB October 26 2023
various Test Report pdf October 09 2023
various Cover Letter(s) pdf February 24 2023
various Letter Cover Letter(s) pdf 23.82 KiB February 24 2023
various Test Report pdf February 24 2023
various Calibration Certificate RF Exposure Info pdf 2.35 MiB January 18 2023
various RF Exposure Info pdf January 17 2023 / January 18 2023
various SAR Setup Photo Test Setup Photos pdf 934.26 KiB January 17 2023 / July 17 2023 delayed release
various Block Diagram pdf January 17 2023
various RF Exposure Info pdf November 29 2022
various FCC Declaration Letter Cover Letter(s) pdf 149.13 KiB November 25 2022
various cover letter Attestation Statements pdf 44.45 KiB November 25 2022
various test photo Test Setup Photos pdf 356.08 KiB November 25 2022 / May 24 2023 delayed release
various Software Security Description Cover Letter(s) pdf 118.44 KiB November 25 2022
various Channel Statement Cover Letter(s) pdf 72.15 KiB November 25 2022
various RF Exposure Info pdf November 25 2022
various AX210NGW- Confidentiality Request 20220420 rev Cover Letter(s) pdf 200.60 KiB May 03 2022 / May 06 2022
various AX210NGW- Declaration letter for electrically identical rev Cover Letter(s) pdf 170.75 KiB May 03 2022 / May 06 2022
various AX210NGW- Declaration of authorization FCC Cover Letter(s) pdf 138.27 KiB May 03 2022 / May 06 2022
various FCC Auth Ltr Change of ID DT Research rev01 Cover Letter(s) pdf 87.87 KiB May 03 2022 / May 06 2022

frequency equipment class purpose
1 2024-04-01 2422 ~ 2452 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
2 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
3 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
4 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
5 2024-03-05 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
6 2024-03-04 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
7 2422 ~ 2462 DTS - Digital Transmission System
8 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
9 2024-02-04 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
10 2422 ~ 2462 DTS - Digital Transmission System
11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
12 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
13 2024-01-15 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
14 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
15 2422 ~ 2462 DTS - Digital Transmission System
16 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
17 2024-01-08 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
18 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
19 2422 ~ 2452 DTS - Digital Transmission System
20 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
21 2023-11-30 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
22 2422 ~ 2462 DTS - Digital Transmission System
23 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
25 2023-10-26 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
26 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
27 2422 ~ 2462 DTS - Digital Transmission System
28 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
29 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
30 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
31 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
32 2422 ~ 2462 DTS - Digital Transmission System
33 2023-10-09 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
34 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
35 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
36 2422 ~ 2462 DTS - Digital Transmission System
37 2023-09-19 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
38 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
39 2422 ~ 2462 DTS - Digital Transmission System
40 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client
41 2023-07-21 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
42 2023-07-20 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
43 2422 ~ 2462 DTS - Digital Transmission System
44 2023-02-24 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
45 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
46 2422 ~ 2462 DTS - Digital Transmission System
47 2023-01-18 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
48 2023-01-17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
49 2412 ~ 2472 DTS - Digital Transmission System
50 2022-12-15 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II Permissive Change
51 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
52 2422 ~ 2462 DTS - Digital Transmission System
53 2022-11-29 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX Class II permissive change or modification of presently authorized equipment
54 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
55 2422 ~ 2462 DTS - Digital Transmission System
56 2022-11-25 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
57 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
58 2422 ~ 2462 DTS - Digital Transmission System
59 2022-05-06 6025 ~ 6985 6XD - 15E 6 GHz Low Power Indoor Client Change in Identification
60 2422 ~ 2462 DTS - Digital Transmission System
61 5775 ~ 5775 NII - Unlicensed National Information Infrastructure TX
62 JBP - Part 15 Class B Computing Device Peripheral
63 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter

Application Forms

app s Applicant Information
various Effective 2024-04-01
various 2024-03-05
various 2024-03-04
various 2024-02-04
various 2024-01-15
various 2024-01-08
various 2023-11-30
various 2023-10-26
various 2023-10-09
various 2023-09-19
various 2023-07-21
various 2023-07-20
various 2023-02-24
various 2023-01-18
various 2023-01-17
various 2022-12-15
various 2022-11-29
various 2022-11-25
various 2022-05-06
various Applicant's complete, legal business name DT Research, Inc.
various FCC Registration Number (FRN) 0019830793
various Physical Address 3RD FL NO 36 WUQUAN 7TH RD WUGU DISTRICT
various NEW TAIPEI, N/A
various Taiwan
app s TCB Information
various TCB Application Email Address U******@SGS.COM
various h******@acbcert.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
various A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
app s FCC ID
various Grantee Code YE3
various Equipment Product Code 600-AX210NG
app s Person at the applicant's address to receive grant or for contact
various Name J******** H******
various Telephone Number 886-2******** Extension:
various Fax Number 886-2********
various E-mail j******@dtri.com
app s Technical Contact
various Firm Name SGS-CSTC Standards Technical Services Co., Ltd.
various Compliance Certification Services (Kunshan) Inc
various DEKRA Testing and Certification Co., Ltd
various Name K****** X********
various W******** W****
various J****** W********
various J****** W****
various Physical Address No.1 Workshop, M-10, Middle Section
various No.1 Workshop, M-10, Middle Section Science & Tech
various Fuyong Lab Xinlong Techno Park Fengtang Road
various No.5-22, Ruishukeng, Linkou Dist.
various Shenzhen, 518057
various 518057
various Shenzhen
various Shenzhen, 510663
various New Taipei City, 24451
various China
various Taiwan
various Telephone Number +8675********
various +8613********
various 86-13********
various +8862********
various Fax Number N/A********
various E-mail k******@sgs.com
various K******@sgs.com
various w******@sgs.com
various j******@dekra.com
app s Non Technical Contact
various Firm Name SGS-CSTC Standards Technical Services Co., Ltd.
various Compliance Certification Services (Kunshan) Inc
various Name K******** X****
various W******** W****
various Physical Address No.1 Workshop, M-10, Middle Section
various No.1 Workshop, M-10, Middle Section Science & Tech
various Fuyong Lab Xinlong Techno Park Fengtang Road
various 518057
various Shenzhen, 518057
various Shenzhen
various Shenzhen, 510663
various China
various Telephone Number +8675********
various +8613********
various Fax Number N/A********
various E-mail k******@sgs.com
various K******@sgs.com
various U******@SGS.COM
various w******@sgs.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)09/28/2024
various09/01/2024
various08/03/2024
various07/14/2024
various07/06/2024
various05/28/2024
various04/23/2024
various04/07/2024
various03/18/2024
various01/17/2024
various08/23/2023
various07/17/2023
various06/13/2023
various05/29/2023
various05/24/2023
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousNII - Unlicensed National Information Infrastructure TX
various6XD - 15E 6 GHz Low Power Indoor Client
variousJBP - Part 15 Class B Computing Device Peripheral
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)Rugged Convertible Laptop
variousIntergrated LCD System
variousGraphics Station
variousMobile Tablet
variousRugged Tablet
variousBattery Powered Computer
variousIntegrated LCD System
variousIntel WiFi 6E AX210 Module
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousYes
variousModular Equipment TypeSingle Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II permissive change or modification of presently authorized equipment
variousClass II Permissive Change
variousChange in Identification
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed DT Research WLAN/BT single module which has been authorized under FCC ID: YE3600-AX210NG, Granted at 05/06/2022 into a host product Model: LT355, LT355xxxxx (x=0-9,A-Z, - or null, or., or /). Also, the antenna of the RF Single module approval used in this fixed device has been replaced with the same antenna type with different antenna gain; The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user and the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Considering this change, the test item of Conducted Emissions at AC Power Line (150kHz-30MHz), Radiated Emissions which fall in the restricted bands and Radiated Emissions were fully tested to demonstrate the compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 1.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed DT Research WLAN/BT single module which has been authorized under FCC ID: YE3600-AX210NG, Granted at 05/06/2022 into a host product Model: LT355, LT355xxxxx (x=0-9,A-Z, - or null, or., or /). Also, the antenna of the RF Single module approval used in this fixed device has been replaced with the same antenna type with different antenna gain; The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user and the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Considering this change, the test item of Conducted Emissions at AC Power Line (150kHz-30MHz), Radiated Emissions which fall in the restricted bands and Radiated Emissions were fully tested to demonstrate the compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed DT Research WLAN/BT single module which has been authorized under FCC ID: YE3600-AX210NG, Granted at 05/06/2022 into a host product "Model: LT355, LT355xxxxx (x=0-9,A-Z, - or null, or., or /)". Also, the antenna of the RF Single module approval used in this fixed device has been replaced with the same antenna type with different antenna gain; The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user and the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Considering this change, the test item of Conducted Emissions at AC Power Line (150kHz-30MHz), Radiated Emissions which fall in the restricted bands and Radiated Emissions were fully tested to demonstrate the compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed DT Research WLAN/BT single module which has been authorized under FCC ID: YE3600-AX210NG, Granted at 05/06/2022 into a host product Model: LT355, LT355xxxxx (x=0-9,A-Z, - or null, or., or /). Also, the antenna of the RF Single module approval used in this fixed device has been replaced with the same antenna type with different antenna gain; The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user and the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Considering this change, the test item of Conducted Emissions at AC Power Line (150kHz-30MHz), Radiated Emissions which fall in the restricted bands and Radiated Emissions were fully tested to demonstrate the compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module(FCC ID: YE3600-AX210NG, Granted at 05/06/2022) into a host product Model: 504T, 504xxxxx(x is -, any alphanumeric or blank). The antenna of the RF Single module approval used in this fixed device has been replaced with the same antenna type and reduced antenna gain. Considering this change, the test item of Conducted Emissions at AC Power Line (150kHz-30MHz), Radiated Emissions which fall in the restricted bands and Radiated Emissions were fully tested to demonstrate the compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 1.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module(FCC ID: YE3600-AX210NG, Granted at 05/06/2022) into a host product Model: 504T, 504xxxxx(x is -, any alphanumeric or blank). The antenna of the RF Single module approval used in this fixed device has been replaced with the same antenna type and reduced antenna gain. Considering this change, the test item of Conducted Emissions at AC Power Line (150kHz-30MHz), Radiated Emissions which fall in the restricted bands and Radiated Emissions were fully tested to demonstrate the compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module(FCC ID: YE3600-AX210NG, Granted at 05/06/2022) into a host product Model: 504T, 504xxxxx(x is -, any alphanumeric or blank). The antenna of the RF Single module approval used in this fixed device has been replaced with the same antenna type and reduced antenna gain. Considering this change, the test item of Conducted Emissions at AC Power Line (150kHz-30MHz), Radiated Emissions which fall in the restricted bands and Radiated Emissions were fully tested to demonstrate the compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module(FCC ID: YE3600-AX210NG, Granted at 05/06/2022) into a host product Model: 504T, 504xxxxx(x is -, any alphanumeric or blank). The antenna of the RF Single module approval used in this fixed device has been replaced with the same antenna type and reduced antenna gain. Considering this change, the test item of Conducted Emissions at AC Power Line (150kHz-30MHz), Radiated Emissions which fall in the restricted bands and Radiated Emissions were fully tested to demonstrate the compliance.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module(FCC ID: YE3600-AX210NG, granted at 05/06/2022) into a host product Model: 554GR, 554xxxxx(x is -, any alphanumeric or blank). The antenna of the RF Single module approval used in this fixed device has been replaced with the same antenna type and reduced antenna gain.Considering this change, the test item of Conducted Emissions at AC Power Line (150kHz-30MHz), Radiated Emissions which fall in the restricted bands and Radiated Emissions and Contention Based Protocol were fully tested to demonstrate the compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module(FCC ID: YE3600-AX210NG, granted at 05/06/2022) into a host product Model: 554GR, 554xxxxx(x is -, any alphanumeric or blank). The antenna of the RF Single module approval used in this fixed device has been replaced with the same antenna type and reduced antenna gain. Considering this change, the test item of Conducted Emissions at AC Power Line (150kHz-30MHz), Radiated Emissions which fall in the restricted bands and Radiated Emissions were fully tested to demonstrate the compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 1.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module(FCC ID: YE3600-AX210NG, granted at 05/06/2022) into a host product Model: 554GR, 554xxxxx(x is -, any alphanumeric or blank). The antenna of the RF Single module approval used in this fixed device has been replaced with the same antenna type and reduced antenna gain. Considering this change, the test item of Conducted Emissions at AC Power Line (150kHz-30MHz), Radiated Emissions which fall in the restricted bands and Radiated Emissions were fully tested to demonstrate the compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module(FCC ID: YE3600-AX210NG, granted at 05/06/2022) into a host product Model: 554GR, 554xxxxx(x is -, any alphanumeric or blank). The antenna of the RF Single module approval used in this fixed device has been replaced with the same antenna type and reduced antenna gain. Considering this change, the test item of Conducted Emissions at AC Power Line (150kHz-30MHz), Radiated Emissions which fall in the restricted bands and Radiated Emissions and DFS were fully tested to demonstrate the compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host product Model: 316T,316T/MD,316xxxxx(x=0-9, A-Z, - or null, or., or /), the module has been authorized under FCC ID: YE3600-AX210NG, Granted at 05/06/2022; The antenna of the RF Single module approval used in this portable device has been replaced with the same antenna type and reduced antenna gain; The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user and the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Based on these changes, the radiated emissions tests and SAR tests were conducted. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 1.15W/kg and 0.87W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 1.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host product Model: 316T,316T/MD,316xxxxx(x=0-9, A-Z, - or null, or., or /), the module has been authorized under FCC ID: YE3600-AX210NG, Granted at 05/06/2022; The antenna of the RF Single module approval used in this portable device has been replaced with the same antenna type and reduced antenna gain; The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user and the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Based on these changes, the radiated emissions tests and SAR tests were conducted. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 0.12W/kg and 0.87W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host product Model: 316T,316T/MD,316xxxxx(x=0-9, A-Z, - or null, or., or /), the module has been authorized under FCC ID: YE3600-AX210NG, Granted at 05/06/2022; The antenna of the RF Single module approval used in this portable device has been replaced with the same antenna type and reduced antenna gain; The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user and the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Based on these changes, the radiated emissions tests and SAR tests were conducted. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 0.43W/kg and 0.87W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host product Model: 316T,316T/MD,316xxxxx(x=0-9, A-Z, - or null, or., or /), the module has been authorized under FCC ID: YE3600-AX210NG, Granted at 05/06/2022; The antenna of the RF Single module approval used in this portable device has been replaced with the same antenna type and reduced antenna gain; The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user and the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Based on these changes, the radiated emissions tests and SAR tests were conducted. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 1.04W/kg and 0.87W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 1.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host product Model: DT340T, DT340XXXXX(X=0-9, A-Z, - or null, or ., or /), also contains a DT Research WLAN/BT Module which has been authorized under FCC ID: YE3600-AX210NG, Granted at 05/06/2022; The antenna of the RF Single module approval used in this portable device has been replaced with the same antenna type and reduced antenna gain; The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user and the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Based on these changes, the radiated emissions tests and SAR tests were conducted. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 0.27W/kg and 1.24W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host product Model: DT340T, DT340XXXXX(X=0-9, A-Z, - or null, or ., or /), also contains a DT Research WLAN/BT Module which has been authorized under FCC ID: YE3600-AX210NG, Granted at 05/06/2022; The antenna of the RF Single module approval used in this portable device has been replaced with the same antenna type and reduced antenna gain; The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user and the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Based on these changes, the radiated emissions tests and SAR tests were conducted. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 1.20W/kg and 1.24W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host product Model: DT340T, DT340XXXXX(X=0-9, A-Z, - or null, or ., or /) , also contains a DT Research WLAN/BT Module which has been authorized under FCC ID: YE3600-AX210NG, Granted at 05/06/2022; The antenna of the RF Single module approval used in this portable device has been replaced with the same antenna type and reduced antenna gain; The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user and the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Based on these changes, the radiated emissions tests and SAR tests were conducted. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 0.58W/kg and 1.24W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host product Model: DT340T, DT340XXXXX(X=0-9, A-Z, - or null, or ., or /), also contains a DT Research WLAN/BT Module which has been authorized under FCC ID: YE3600-AX210NG, Granted at 05/06/2022; The antenna of the RF Single module approval used in this portable device has been replaced with the same antenna type and reduced antenna gain; The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user and the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Based on these changes, the radiated emissions tests and SAR tests were conducted. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 1.31W/kg and 1.24W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host product (Model: Y302-01). The antenna of the RF Single module approval used in this portable device has been replaced with the same antenna type and reduced antenna gain; The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user and the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Based on these changes, the radiated emissions tests and SAR tests were conducted. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 1.55W/kg and 1.58W/kg respectively. The device has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host product (Model: Y302-01). The antenna of the RF Single module approval used in this portable device has been replaced with the same antenna type and reduced antenna gain; The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user and the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Based on these changes, the radiated emissions tests and SAR tests were conducted. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 0.66W/kg and 1.58W/kg respectively. The device has 20MHz and 40MHz bandwidth modes.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host product (Model: Y302-01). The antenna of the RF Single module approval used in this portable device has been replaced with the same antenna type and reduced antenna gain; The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user and the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Based on these changes, the radiated emissions tests and SAR tests were conducted. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 1.18W/kg and 1.58W/kg respectively. The device has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 1.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host product (Model: Y302-01). The antenna of the RF Single module approval used in this portable device has been replaced with the same antenna type and reduced antenna gain; The RF power of the host product will be reduced by software at the time of production and cannot be adjusted by the end user and the RF output power of the main antenna in MIMO mode is lower than in SISO mode. Based on these changes, the radiated emissions tests and SAR tests were conducted. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and simultaneous SAR values are 0.38W/kg and 1.58W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Laptop, DT301Y, DT301xxxxx (x=0-9, A-Z, - or null, or ., or/) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.04 W/kg and 1.57W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 1.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Laptop, DT313Y, DT313xxxxx (x=0-9, A-Z, - or null, or ., or/) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.46 W/kg and 1.14W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Laptop, DT313Y, DT313xxxxx (x=0-9, A-Z, - or null, or ., or/) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.70 W/kg and 1.14W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Laptop, DT313Y, DT313xxxxx (x=0-9, A-Z, - or null, or ., or/) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.95 W/kg and 1.14W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Laptop, DT313Y, DT313xxxxx (x=0-9, A-Z, - or null, or ., or/) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.18 W/kg and 1.14W/kg respectively. The highest Power Density value is 8.58 W/cm^2. The highest and lowest antenna gains used with the host are 3.2dBi and 4.0dBi respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Laptop, DT301Y, DT301xxxxx (x=0-9, A-Z, - or null, or ., or/) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.53 W/kg and 1.57W/kg respectively. The highest Power Density value is 8.99W/cm^2. The highest and lowest antenna gains used with the host are 3.4dBi and 4.0dBi respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 1.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Laptop, DT301Y, DT301xxxxx (x=0-9, A-Z, - or null, or ., or/) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.27 W/kg and 1.57W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Laptop, DT301Y, DT301xxxxx (x=0-9, A-Z, - or null, or ., or/) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.10 W/kg and 1.57W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Laptop, DT311Y, DT311xxxxx (x=0-9, A-Z, - or null, or ., or/) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.20W/kg respectively. The highest and lowest antenna gains used with the host are 3.9dBi and 3.6dBi respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Laptop, DT311Y, DT311xxxxx (x=0-9, A-Z, - or null, or ., or/) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.07 W/kg and 1.20W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 1.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Laptop, DT311Y, DT311xxxxx (x=0-9, A-Z, - or null, or ., or/) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.53 W/kg and 1.20W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Laptop, DT311Y, DT311xxxxx (x=0-9, A-Z, - or null, or ., or/) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.01 W/kg and 1.20W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Laptop, DT381RP, DT381xxxxx(x=0-9, A-Z, - or null, or ., or/) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.1 W/kg and 1.20 W/kg respectively.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 1.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Laptop, DT381RP, DT381xxxxx(x=0-9, A-Z, - or null) , changed the antenna and performed SAR testing. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.13 W/kg and 1.20 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Laptop, DT381RP, DT381xxxxx(x=0-9, A-Z, - or null) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.78 W/kg and 1.20 W/kg respectively.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Laptop, DT381RP, DT381xxxxx(x=0-9, A-Z, - or null, or ., or/) , changed the antenna and performed SAR and CBP testing. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.20 W/kg respectively. There are two PIFA antenna in this filing, the antenna gains are 4.0 dBi and 3.8 dBi.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Mobile Tablet, DT313Y, DT313xxxx, x=0-9, A-Z, - or null, or . or /), changed the antenna, blocked band 6GHz(5925-7125MHz) by software changed and performed Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.16W/kg and 1.48W/kg respectively. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Mobile Tablet, DT313Y, DT313xxxx, x=0-9, A-Z, - or null, or . or /), changed the antenna, blocked band 6GHz(5925-7125MHz) by software changed and performed Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.31W/kg and 1.48W/kg respectively. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper band edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Mobile Tablet, DT313Y, DT313xxxx, x=0-9, A-Z, - or null, or . or /), changed the antenna, blocked band 6GHz(5925-7125MHz) by software changed and performed Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.61W/kg and 1.48W/kg respectively. SAR testing was performed to demonstrate RF compliance.
variousOutput Power listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in portable/mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Model: 581T, 581XXXXX, X is -, any alphanumeric or blank), changed the antenna, blocked band 6GHz(5925-7125MHz) by software changed and performed Radiated Spurious Emissions test.
variousOutput Power listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 1.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Model: 581T, 581XXXXX, X is -, any alphanumeric or blank), changed the antenna, blocked band 6GHz(5925-7125MHz) by software changed and performed Radiated Spurious Emissions test.
variousOutput Power listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Model: 581T, 581XXXXX, X is -, any alphanumeric or blank), changed the antenna, blocked band 6GHz(5925-7125MHz) by software changed and performed Radiated Spurious Emissions test.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz and 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Mobile Tablet, 313T/MD, 313xxxxx, x=0-9, A~Z, - or null, or . or /), changed the antenna, blocked band 6GHz(5925-7125MHz) by software changed and performed Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.33W/kg and 1.60W/kg respectively. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Mobile Tablet, 313T/MD, 313xxxxx, x=0-9, A~Z, - or null, or . or /), changed the antenna, blocked band 6GHz(5925-7125MHz) by software changed and performed Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.80W/kg and 1.60W/kg respectively. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Mobile Tablet, 313T/MD, 313xxxxx, x=0-9, A~Z, - or null, or . or /), changed the antenna, blocked band 6GHz(5925-7125MHz) by software changed and performed Radiated Spurious Emissions and SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.42W/kg and 1.60W/kg respectively. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 1.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Convertible Laptop, LT33xxxxx, x is -, any alphanumeric or blank) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.08 W/kg and 0.85 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Convertible Laptop, LT33xxxxx, x is -, any alphanumeric or blank) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.12 W/kg and 0.85 W/kg respectively.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Convertible Laptop, LT33xxxxx, x is -, any alphanumeric or blank) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.33 W/kg and 0.85 W/kg respectively.
variousOutput Power listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in portable/mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Integrated LCD System, 502T,502XXXXX( X is -, any alphanumeric or blank)) , changed the antenna and performed emissions test.
variousOutput Power listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 1.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Integrated LCD System, 502T,502XXXXX( X is -, any alphanumeric or blank)) , changed the antenna and performed emissions test.
variousOutput Power listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Integrated LCD System, 502T,502XXXXX( X is -, any alphanumeric or blank)) , changed the antenna and performed emissions test.
variousOutput Power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end- users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Convertible Laptop, LT35XX-XXX, X=blank, A~Z or 0~9) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported SAR for body exposure conditions is Wi-Fi(2.4G):0.99W/kg, Wi-Fi(5G): 1.20W/kg and Bluetooth: 0.24W/kg.
variousPower Output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end- users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160 MHz bandwidth modes. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Convertible Laptop, LT35XX-XXX, X=blank, A~Z or 0~9) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported SAR for body exposure conditions is Wi-Fi(2.4G):0.99W/kg, Wi-Fi(5G): 1.20W/kg and Bluetooth: 0.24W/kg.
variousPower Output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. Permissive changed as specified under 47 CFR 2.1043 of the FCC rules to installed the single module into a host(Rugged Convertible Laptop, LT35XX-XXX, X=blank, A~Z or 0~9) , changed the antenna and performed SAR test. SAR compliance for body operating conditions is limited to the specific configurations tested for this filing. End-users must be informed of the body requirements to satisfy RF exposure compliance. The highest reported SAR for body exposure conditions is Wi-Fi(2.4G):0.99W/kg, Wi-Fi(5G): 1.20W/kg and Bluetooth: 0.24W/kg.
variousPower Output listed is Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.29 W/kg and 0.58 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, Type PIFA at 13mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHz BW modes.
variousPower Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.59W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.78W/kg and 1.57W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousPower Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02 W/kg and 1.57 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 13mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name SGS-CSTC Standards Technical Services Co., Ltd. Sh
various Compliance Certification Services (Kunshan) Inc
various Intel Corporation - Oregon CPRS Labs
various Name K**** X****
various A******** Z********
various F******** B********
various Telephone Number +86 (********
various +86 7********
various 50361********
various Fax Number 50369********
various E-mail K******@sgs.com
various A******@sgs.com
various f******@intel.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402 2480 0.01
1 2 15C CC MO 2412 2462 0.792
1 3 15C CC MO 2422 2452 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC MO 5180 5240 0.166
3 2 15E CC MO 5190 5230 0.199
3 3 15E CC MO 5210 5210 0.089
3 4 15E CC MO 5250 5250 0.061
3 5 15E CC MO ND 5260 5320 0.165
3 6 15E CC MO ND 5270 5310 0.153
3 7 15E CC MO ND 5290 5290 0.084
3 8 15E CC MO ND 5500 5700 0.245
3 9 15E CC MO ND 5710 5710 0.249
3 1 15E CC MO ND 5720 5720 0.134
3 11 15E CC MO ND 5530 5690 0.228
3 12 15E CC MO 5745 5825 0.262
3 13 15E CC MO 5755 5795 0.27
3 14 15E CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15E CC MO 5955 7115 0.003
4 2 15E CC MO 5965 7085 0.007
4 3 15E CC MO 5985 7025 0.013
4 4 15E CC MO 6025 6985 0.026
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CC MO 5180 5240 0.166
5 2 15E CC MO 5190 5230 0.199
5 3 15E CC MO 5210 5210 0.089
5 4 15E CC MO 5250 5250 0.061
5 5 15E CC MO ND 5260 5320 0.165
5 6 15E CC MO ND 5270 5310 0.153
5 7 15E CC MO ND 5290 5290 0.084
5 8 15E CC MO ND 5500 5700 0.245
5 9 15E CC MO ND 5710 5710 0.249
5 1 15E CC MO ND 5720 5720 0.134
5 11 15E CC MO ND 5530 5690 0.228
5 12 15E CC MO 5745 5825 0.262
5 13 15E CC MO 5755 5795 0.27
5 14 15E CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.01
7 2 15C CC MO 2412 2472 0.792
7 3 15C CC MO 2422 2462 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15E CC MO 5955 7115 0.003
8 2 15E CC MO 5965 7085 0.007
8 3 15E CC MO 5985 7025 0.013
8 4 15E CC MO 6025 6985 0.026
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E CC MO 5955 7115 0.003
9 2 15E CC MO 5965 7085 0.007
9 3 15E CC MO 5985 7025 0.013
9 4 15E CC MO 6025 6985
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15C CC 2402 2480 0.01
10 2 15C CC MO 2412 2472 0.792
10 3 15C CC MO 2422 2462 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15E CC MO 5180 5240 0.166
12 2 15E CC MO 5190 5230 0.199
12 3 15E CC MO 5210 5210 0.089
12 4 15E CC MO 5250 5250 0.061
12 5 15E CC MO ND 5260 5320 0.165
12 6 15E CC MO ND 5270 5310 0.153
12 7 15E CC MO ND 5290 5290 0.084
12 8 15E CC MO ND 5500 5700 0.245
12 9 15E CC MO ND 5710 5710 0.249
12 1 15E CC MO ND 5720 5720 0.134
12 11 15E CC MO ND 5530 5690 0.228
12 12 15E CC MO 5745 5825 0.262
12 13 15E CC MO 5755 5795 0.27
12 14 15E CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15E CC MO 5180 5240 0.166
13 2 15E CC MO 5190 5230 0.199
13 3 15E CC MO 5210 5210 0.089
13 4 15E CC MO 5250 5250 0.061
13 5 15E CC MO ND 5260 5320 0.165
13 6 15E CC MO ND 5270 5310 0.153
13 7 15E CC MO ND 5290 5290 0.084
13 8 15E CC MO ND 5500 5700 0.245
13 9 15E CC MO ND 5710 5710 0.249
13 1 15E CC MO ND 5720 5720 0.134
13 11 15E CC MO ND 5530 5690 0.228
13 12 15E CC MO 5745 5825 0.262
13 13 15E CC MO 5755 5795 0.27
13 14 15E CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15C CC 2402 2480 0.01
15 2 15C CC MO 2412 2472 0.792
15 3 15C CC MO 2422 2462 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15E CC MO 5955 7115 0.003
16 2 15E CC MO 5965 7085 0.007
16 3 15E CC MO 5985 7025 0.013
16 4 15E CC MO 6025 6985 0.026
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15E CC MO 5955 7115 0.003
18 2 15E CC MO 5965 7085 0.007
18 3 15E CC MO 5985 7025 0.013
18 4 15E CC MO 6025 6985 0.026
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2402 2480 0.01
19 2 15C CC MO 2412 2462 0.792
19 3 15C CC MO 2422 2452 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15E CC MO 5180 5240 0.166
20 2 15E CC MO 5190 5230 0.199
20 3 15E CC MO 5210 5210 0.089
20 4 15E CC MO 5250 5250 0.061
20 5 15E CC MO ND 5260 5320 0.165
20 6 15E CC MO ND 5270 5310 0.153
20 7 15E CC MO ND 5290 5290 0.084
20 8 15E CC MO ND 5500 5700 0.245
20 9 15E CC MO ND 5710 5710 0.249
20 1 15E CC MO ND 5720 5720 0.134
20 11 15E CC MO ND 5530 5690 0.228
20 12 15E CC MO 5745 5825 0.262
20 13 15E CC MO 5755 5795 0.27
20 14 15E CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15E CC MO 5180 5240 0.166
21 2 15E CC MO 5190 5230 0.199
21 3 15E CC MO 5210 5210 0.089
21 4 15E CC MO 5250 5250 0.061
21 5 15E CC MO ND 5260 5320 0.165
21 6 15E CC MO ND 5270 5310 0.153
21 7 15E CC MO ND 5290 5290 0.084
21 8 15E CC MO ND 5500 5700 0.245
21 9 15E CC MO ND 5710 5710 0.249
21 1 15E CC MO ND 5720 5720 0.134
21 11 15E CC MO ND 5530 5690 0.228
21 12 15E CC MO 5745 5825 0.262
21 13 15E CC MO 5755 5795 0.27
21 14 15E CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15C CC 2402 2480 0.01
22 2 15C CC MO 2412 2472 0.792
22 3 15C CC MO 2422 2462 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15E CC MO 5955 7115 0.003
23 2 15E CC MO 5965 7085 0.007
23 3 15E CC MO 5985 7025 0.013
23 4 15E CC MO 6025 6985 0.026
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15E CC MO 5180 5240 0.166
25 2 15E CC MO 5190 5230 0.199
25 3 15E CC MO 5210 5210 0.089
25 4 15E CC MO 5250 5250 0.061
25 5 15E CC MO ND 5260 5320 0.165
25 6 15E CC MO ND 5270 5310 0.153
25 7 15E CC MO ND 5290 5290 0.084
25 8 15E CC MO ND 5500 5700 0.245
25 9 15E CC MO ND 5710 5710 0.249
25 1 15E CC MO ND 5720 5720 0.134
25 11 15E CC MO ND 5530 5690 0.228
25 12 15E CC MO 5745 5825 0.262
25 13 15E CC MO 5755 5795 0.27
25 14 15E CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402 2480 0.01
27 2 15C CC MO 2412 2472 0.792
27 3 15C CC MO 2422 2462 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15E CC MO 5180 5240 0.166
28 2 15E CC MO 5190 5230 0.199
28 3 15E CC MO 5210 5210 0.089
28 4 15E CC MO 5250 5250 0.061
28 5 15E CC MO ND 5260 5320 0.165
28 6 15E CC MO ND 5270 5310 0.153
28 7 15E CC MO ND 5290 5290 0.084
28 8 15E CC MO ND 5500 5700 0.245
28 9 15E CC MO ND 5710 5710 0.249
28 1 15E CC MO ND 5720 5720 0.134
28 11 15E CC MO ND 5530 5690 0.228
28 12 15E CC MO 5745 5825 0.262
28 13 15E CC MO 5755 5795 0.27
28 14 15E CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15E CC MO 5955 7115 0.003
29 2 15E CC MO 5965 7085 0.007
29 3 15E CC MO 5985 7025 0.013
29 4 15E CC MO 6025 6985 0.026
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15E CC MO 5955 7115 0.003
30 2 15E CC MO 5965 7085 0.007
30 3 15E CC MO 5985 7025 0.013
30 4 15E CC MO 6025 6985 0.026
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15C CC 2402 2480 0.01
32 2 15C CC MO 2412 2472 0.792
32 3 15C CC MO 2422 2462 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15E CC MO 5955 7115 0.003
33 2 15E CC MO 5965 7085 0.007
33 3 15E CC MO 5985 7025 0.013
33 4 15E CC MO 6025 6985 0.026
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15E CC MO 5180 5240 0.166
34 2 15E CC MO 5190 5230 0.199
34 3 15E CC MO 5210 5210 0.089
34 4 15E CC MO 5250 5250 0.061
34 5 15E CC MO ND 5260 5320 0.165
34 6 15E CC MO ND 5270 5310 0.153
34 7 15E CC MO ND 5290 5290 0.084
34 8 15E CC MO ND 5500 5700 0.245
34 9 15E CC MO ND 5710 5710 0.249
34 1 15E CC MO ND 5720 5720 0.134
34 11 15E CC MO ND 5530 5690 0.228
34 12 15E CC 5745 5825 0.262
34 13 15E CC 5755 5795 0.27
34 14 15E CC 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15C CC 2402 2480 0.01
36 2 15C CC MO 2412 2472 0.792
36 3 15C CC MO 2422 2462 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15E CC MO 5180 5240 0.166
37 2 15E CC MO 5190 5230 0.199
37 3 15E CC MO 5210 5210 0.089
37 4 15E CC MO 5250 5250 0.061
37 5 15E CC MO ND 5260 5320 0.165
37 6 15E CC MO ND 5270 5310 0.153
37 7 15E CC MO ND 5290 5290 0.084
37 8 15E CC MO ND 5500 5700 0.245
37 9 15E CC MO ND 5710 5710 0.249
37 1 15E CC MO ND 5720 5720 0.134
37 11 15E CC MO ND 5530 5690 0.228
37 12 15E CC 5745 5825 0.262
37 13 15E CC 5755 5795 0.27
37 14 15E CC 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15C CC 2402 2480 0.01
39 2 15C CC MO 2412 2472 0.792
39 3 15C CC MO 2422 2462 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15E CC MO 5955 7115 0.003
40 2 15E CC MO 5965 7085 0.007
40 3 15E CC MO 5985 7025 0.013
40 4 15E CC MO 6025 6985 0.026
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15E CC MO 5180 5240 0.166
41 2 15E CC MO 5190 5230 0.199
41 3 15E CC MO 5210 5210 0.089
41 4 15E CC MO 5250 5250 0.061
41 5 15E CC MO ND 5260 5320 0.165
41 6 15E CC MO ND 5270 5310 0.153
41 7 15E CC MO ND 5290 5290 0.084
41 8 15E CC MO ND 5500 5700 0.245
41 9 15E CC MO ND 5710 5710 0.249
41 1 15E CC MO ND 5720 5720 0.134
41 11 15E CC MO ND 5530 5690 0.228
41 12 15E CC MO 5745 5825 0.262
41 13 15E CC MO 5755 5795 0.27
41 14 15E CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
42 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
43 1 15C CC 2402 2480 0.01
43 2 15C CC MO 2412 2472 0.792
43 3 15C CC MO 2422 2462 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
44 1 15E CC MO 5180 5240 0.166
44 2 15E CC MO 5190 5230 0.199
44 3 15E CC MO 5210 5210 0.089
44 4 15E CC MO 5250 5250 0.061
44 5 15E CC MO ND 5260 5320 0.165
44 6 15E CC MO ND 5270 5310 0.153
44 7 15E CC MO ND 5290 5290 0.084
44 8 15E CC MO ND 5500 5700 0.245
44 9 15E CC MO ND 5710 5710 0.249
44 1 15E CC MO ND 5720 5720 0.134
44 11 15E CC MO ND 5530 5690 0.228
44 12 15E CC MO 5745 5825 0.262
44 13 15E CC MO 5755 5795 0.27
44 14 15E CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
45 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
46 1 15C CC 2402 2480 0.01
46 2 15C CC MO 2412 2472 0.792
46 3 15C CC MO 2422 2462 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
47 1 15E CC MO 5180 5240 0.166
47 2 15E CC MO 5190 5230 0.199
47 3 15E CC MO 5210 5210 0.089
47 4 15E CC MO 5250 5250 0.061
47 5 15E CC MO ND 5260 5320 0.165
47 6 15E CC MO ND 5270 5310 0.153
47 7 15E CC MO ND 5290 5290 0.084
47 8 15E CC MO ND 5500 5700 0.245
47 9 15E CC MO ND 5710 5710 0.249
47 1 15E CC MO ND 5720 5720 0.134
47 11 15E CC MO ND 5530 5690 0.228
47 12 15E CC MO 5745 5825 0.262
47 13 15E CC MO 5755 5795 0.27
47 14 15E CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
48 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
49 1 15C CC 2402 2480 0.01
49 2 15C CC MO 2412 2472 0.792
49 3 15C CC MO 2412 2462 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
50 1 15C 28 CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
51 1 15E 28 CC MO 5180 5240 0.166
51 2 15E 28 CC MO 5190 5230 0.199
51 3 15E 28 CC MO 5210 5210 0.089
51 4 15E 28 CC MO 5250 5250 0.061
51 5 15E 28 CC MO ND 5260 5320 0.165
51 6 15E 28 CC MO ND 5270 5310 0.153
51 7 15E 28 CC MO ND 5290 5290 0.084
51 8 15E 28 CC MO ND 5500 5700 0.245
51 9 15E 28 CC MO ND 5710 5710 0.249
51 1 15E 28 CC MO ND 5720 5720 0.134
51 11 15E 28 CC MO ND 5530 5690 0.228
51 12 15E 28 CC MO 5745 5825 0.262
51 13 15E 28 CC MO 5755 5795 0.27
51 14 15E 28 CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
52 1 15C 28 CC 2402 2480 0.01
52 2 15C 28 CC MO 2412 2472 0.792
52 3 15C 28 CC MO 2422 2462 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
53 1 15E CC MO 5180 5240 0.166
53 2 15E CC MO 5190 5230 0.199
53 3 15E CC MO 5210 5210 0.089
53 4 15E CC MO 5250 5250 0.061
53 5 15E CC MO ND 5260 5320 0.165
53 6 15E CC MO ND 5270 5310 0.153
53 7 15E CC MO ND 5290 5290 0.084
53 8 15E CC MO ND 5500 5700 0.245
53 9 15E CC MO ND 5710 5710 0.249
53 1 15E CC MO ND 5720 5720 0.134
53 11 15E CC MO ND 5530 5690 0.228
53 12 15E CC MO 5745 5825 0.262
53 13 15E CC MO 5755 5795 0.27
53 14 15E CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
54 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
55 1 15C CC 2402 2480 0.01
55 2 15C CC MO 2412 2472 0.792
55 3 15C CC MO 2422 2462 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
56 1 15C CC 2402.00000000 2480.00000000 0.0140000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
57 1 15E CC MO 5180 5240 0.166
57 2 15E CC MO 5190 5230 0.199
57 3 15E CC MO 5210 5210 0.089
57 4 15E CC MO 5250 5250 0.061
57 5 15E CC MO ND 5260 5320 0.165
57 6 15E CC MO ND 5270 5310 0.153
57 7 15E CC MO ND 5290 5290 0.084
57 8 15E CC MO ND 5500 5700 0.245
57 9 15E CC MO ND 5710 5710 0.249
57 1 15E CC MO ND 5720 5720 0.134
57 11 15E CC MO ND 5530 5690 0.228
57 12 15E CC MO 5745 5825 0.262
57 13 15E CC MO ND 5755 5795 0.27
57 14 15E CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
58 1 15C CC 2402 2480 0.01
58 2 15C CC MO 2412 2472 0.792
58 3 15C CC MO 2422 2462 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
59 1 15E CC MO 5955 7115 0.003
59 2 15E CC MO 5965 7085 0.007
59 3 15E CC MO 5985 7025 0.013
59 4 15E CC MO 6025 6985 0.026
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
60 1 15C CC 2402 2480 0.01
60 2 15C CC MO 2412 2472 0.792
60 3 15C CC MO 2422 2462 0.602
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
61 1 15E CC MO 5180 5240 0.166
61 2 15E CC MO 5190 5230 0.199
61 3 15E CC MO 5210 5210 0.089
61 4 15E CC MO 5250 5250 0.061
61 5 15E CC MO ND 5260 5320 0.165
61 6 15E CC MO ND 5270 5310 0.153
61 7 15E CC MO ND 5290 5290 0.084
61 8 15E CC MO ND 5500 5700 0.245
61 9 15E CC MO ND 5710 5710 0.249
61 1 15E CC MO ND 5720 5720 0.134
61 11 15E CC MO ND 5530 5690 0.228
61 12 15E CC MO 5745 5825 0.262
61 13 15E CC MO 5755 5795 0.27
61 14 15E CC MO 5775 5775 0.195
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
62 1 15B
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
63 1 15C CC 2402.00000000 2480.00000000 0.0140000

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC